athlon 2600 tbred b core @1.95v too high?

[aowen512]

my temps are rising and now at 50C is 1.95 too high for the voltage setting and what can the core of this cpu take... ne1 know?
thx!

nf7-s 2600xp oced to 3200 speed fsb 210
3500 kingston hyper-x ddr 2x512 CL2 (discontinued, they only have CL2.5 now
leadtech 6800 gt @ ultra speeds
hitachi 2x80gb in raid0

 

[scottchen]

1.95V on a Tbred is a little high, but depends on how long you want to keep the chip. i wouldn't go above 1.8 on those chips if i want to keep it for a year or more.

 

[aowen512]

ok ive got it down quite a bit thx for your reply

nf7-s 2600xp oced to 3200 speed fsb 210
3500 kingston hyper-x ddr 2x512 CL2 (discontinued, they only have CL2.5 now
leadtech 6800 gt @ ultra speeds
hitachi 2x80gb in raid0

 

[aowen512]

ok well currently ive got it at 207fsb X 11 and volt at 1.825 adn it runs 38 - 44C on full load and stable

i not really sure y i had it so high to begin with i updated my bios and had my cmos cleared.. i had wrote down as 1.95 volts and thought that was high so i turned it way down and asked here

i think im going to keep lowering it to see if i cant get it stable at lower volts

ill keep you up to date with it

thx!

and btw i got my new zalman nb47j heatsink and a 10 pack of micro cool chipset coolers for my mobo in today i should be putting those on sometime this week and with chip coolers on my fsb and more i should be able to raise that so im kind of excited right now

nf7-s 2600xp oced to 3200 speed fsb 210
3500 kingston hyper-x ddr 2x512 CL2 (discontinued, they only have CL2.5 now
leadtech 6800 gt @ ultra speeds
hitachi 2x80gb in raid0