I have had enough of heat.

[RX8]

I have seen pics of neds water cooling system, and to be honest my thermaltake bigwater looks like a peewee piece of sh1t compared to hes.

I want a big bad assss cooling mothofuccker like hes, please direct me. thx guys.

<font color=purple> MY FINGER IS ON THE BUTTON! </font color=purple>

 

[mozzartusm]

All you need is an aquarium pump from Walmart that has an adjustable flow rate and then pick the resivior of your choice. My #1 res is a 2 1/2 gallon Whirlpool water dispenser that I modded and my #2 res is a 1 gallon milk jug that uses the old pump from my Thermaltake BigWater. The reason that I have two is because I run one only to my CPU and the other cools the Northbridge and Video card. I can get the temps down around 12C when I need to do some heavy OCing.

Intel P4 550(3.4)<font color=red>@4.2 posted 4.8</font color=red>
ASUS P5AD2-E-Prem
Ballistix PC2 5300@<font color=red>DDR2 780</font color=red>
ATI Radeon X800XL <font color=red>459/609</font color=red>
TT 680W PSU

 

[scottchen]

Don't bother with too much watercooling stuff just move to freon compressor cooling Not exactly a cheap move, but I thought it was worth it.

 

[Ned_Flanders]

:lol: :lol: :lol:

In answer to a question you asked me in another thread - My watercooling is custom built, I don't really like kits so I can't recommend one.

My system:

Danger Den RBX CPU Waterblock
Maze 4 (2005 Model) GPU Waterblock
Hydor L30 Water pump
DangerDen Rez (Can't remember its name)
Thermochill 120.1 Radiator (Upgrading to either another 120.1 or just a 120.2)

All connected with 1/2" tubing.


______________
Who's the man with the master plan?

 

[RX8]

thx guys. now i know where to get started.

<font color=purple> MY FINGER IS ON THE BUTTON! </font color=purple>

 

[mozzartusm]

Im getting close to finishing mine. Ive still got some work to do on the heatsink though.

Intel P4 550(3.4)<font color=red>@4.2 posted 4.8</font color=red>
ASUS P5AD2-E-Prem
Ballistix PC2 5300@<font color=red>DDR2 780</font color=red>
ATI Radeon X800XL <font color=red>459/609</font color=red>
TT 680W PSU

 

[Ned_Flanders]

What you got then?

______________
Who's the man with the master plan?

 

[Ned_Flanders]

...oh, and pics?

______________
Who's the man with the master plan?

 

[scottchen]

Hehe you guys still struggling to keep temps down While mine runs in the -20's.

 

[mozzartusm]

Before I take a pic I have got to figure out what kind of enclosure to use. As of now its not very pretty!

Intel P4 550(3.4)<font color=red>@4.2 posted 4.8</font color=red>
ASUS P5AD2-E-Prem
Ballistix PC2 5300@<font color=red>DDR2 780</font color=red>
ATI Radeon X800XL <font color=red>459/609</font color=red>
TT 680W PSU

 

[mozzartusm]

Im sure the weather where you live is a big help compared to the weather here. What are you using to keep your temps that low?

Intel P4 550(3.4)<font color=red>@4.2 posted 4.8</font color=red>
ASUS P5AD2-E-Prem
Ballistix PC2 5300@<font color=red>DDR2 780</font color=red>
ATI Radeon X800XL <font color=red>459/609</font color=red>
TT 680W PSU

 

[scottchen]

Prometeia, no it gurantees negative temperatures even if room temp is in the 100F zone.

 

[scottchen]

The weather where I live is actually moderate, right now it's in the 15C's

 

[mozzartusm]

You call 15C moderate! LOL you should visit Mississippi sometime. This is the honest truth: 90% of the time here in MS, if you are trying to reach your best possible benchmarks you have to wait untill after midnight for the temps and most importantly for the humidity to drop enough that the Mobo doesnt overheat.

Intel P4 550(3.4)<font color=red>@4.2 posted 4.8</font color=red>
ASUS P5AD2-E-Prem
Ballistix PC2 5300@<font color=red>DDR2 780</font color=red>
ATI Radeon X800XL <font color=red>459/609</font color=red>
TT 680W PSU