Added fan, temp rose, help!

[littleman00]

I recently bought a floppy drive, card reader, and extra 80mm fan for my comp. When I added the parts, I checked my temp and the CPU temp is now at 60 C when it used to run about 52-53 C. Here's what Im running

ABIT uGuru AV8 board

AMD 64 3400+

Zalman 7700 all copper heatsink/fan

3 80mm Fans, two on side sucking air from board, one blowing air toward board from front of case

120mm fan in rear

GeForce 6600GT

Creative Audigy 2 ZS

4x512 MB RAM

when I activate the board's temp monitoring program it shows:
CPU: 61 C
SYS: 41 C
PWM: 39 C

Before adding parts with extra fan, temp was about 5-6 degrees cooler. Why the jump in temp?

 

[scottchen]

Are these idle temperatures or load? Make sure you have cool&Quite disabled, and that the fan is running on that zalman heastink.

 

[Crashman]

Try flipping over the new fan and see if that helps.

<font color=blue>Only a place as big as the internet could be home to a hero as big as Crashman!</font color=blue>
<font color=red>Only a place as big as the internet could be home to an ego as large as Crashman's!</font color=red>

 

[littleman00]

I tried that, no difference. How do I turn off the Cool 'n' Quiet thing? I know I do it through the BIOS, but I went to that and I can't find it.

 

[Unolocogringo]

You should have the 3 80mm fans blowing in and the 120mm and powersupply fan blowing out.

I aint signing nothing!!!