Tom's Hardware > Forum > Overclocking > CPUs > 1T/2T

1T/2T

Forum Overclocking : CPUs - 1T/2T

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
t33lo   08-28-2005 at 12:50:42 AM

For some reason, when I change my timing from 1T to 2T, it doesn't change. I have the liberty to choose from auto, 1t and 2t. It always displays 1T no matter what settings I choose. Why would this happen? I used to be able to have it on 2T.

<i>I pretend to know what I'm talking about.</i>

Add a reply
Sponsored Links
Register or log in to remove.
t33lo   08-28-2005 at 04:03:35 AM
- 0 +

the 1t/2t is the write to read delay? (tWtR)

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   08-28-2005 at 06:45:31 AM
- 0 +

In order to push the frequency higher, I need that 2T for relaxed timings. Without it, my computer crashes under load.

Why would it not allow those timings? I restore bios to original settings and change the time to 2t and it still registers as 1t when computer restarts and shows bios screen. (3-3-3-8 1T @ 250Mhz X11)

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   08-29-2005 at 03:23:13 AM
- 0 +

Ok that seems to make more sense as I read up on-line. I just want to push my memory as far as it goes. I don't think it can go past 250 :(... any suggestions?

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   08-29-2005 at 10:50:20 AM
- 0 +

Geez can't ram run at 250+ and not exceed 2.8V??? I don't want to burn out my ram in 1 year.

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
apesoccer   09-01-2005 at 04:09:44 PM
- 0 +

'ram' can...perhaps not yours? TCCD ram will run higher at preset v. TCCD in most cases won't work over 2.8 or 2.9.

bh and ch ram require more v to run faster...they thrive on it.

F@H:
AMD: [64 3000+][2500+][2400+][2000+][1.3][366]
Intel: [X 3.0x3][P4 3.0x2][P4-M 2.4][P4 1.4]

"...and i'm not gay" RX8 -Greatest Quote of ALL Time

Reply to apesoccer
t33lo   09-01-2005 at 04:42:31 PM
- 0 +

Well I guess I'm pretty good with this overclock:
Athlon 64 3700+ Sandy @ 2807mhz vcore @ 1.57v
HTTlink 3x
DFI LANparty SLI-DR Mobo
Crucial Ballistix PC3200 (255x11) @ 2.9v 3-3-3-8 1T
Idle 30*C Load 43*C
Can this get better or no?


<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
apesoccer   09-01-2005 at 05:23:17 PM
- 0 +

It might be able to be higher...Do you know what that ballistic ram is rated to? Have you checked out what other people are getting with that ram?

After checking in to that, you'll have a better idea of what your system is capable of. Coming to us, we can give you general guidelines for different kinds of ram, but always the best advice comes from someone who has actually used your specific ram and OC'd with it.

F@H:
AMD: [64 3000+][2500+][2400+][2000+][1.3][366]
Intel: [X 3.0x3][P4 3.0x2][P4-M 2.4][P4 1.4]

"...and i'm not gay" RX8 -Greatest Quote of ALL Time

Reply to apesoccer
t33lo   09-01-2005 at 07:09:21 PM
- 0 +

I heard that HTT above 1000mhz becomes unstable (255x4) with having it at 1020 be stable?

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   09-02-2005 at 08:34:31 PM
- 0 +

What is VDD? I looked for it in my bios and couldn't find it. Also, where do you find this, is it the same as dimm voltage?

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
apesoccer   09-02-2005 at 11:00:26 PM
- 0 +

DANGER Will Robinson DANGER

...heh =)

F@H:
AMD: [64 3000+ (down)][2500+][2400+][2000+][1.3][366]
Intel: [X 3.0x3][X 2.8x2][P4 3.0x2][P4-M 2.4][P4 1.4x5][P4 1.3]

"...and i'm not gay" RX8 -Greatest Quote of ALL Time

Reply to apesoccer
t33lo   09-02-2005 at 11:12:09 PM
- 0 +

Well My computer seems rather stable except for the fact that It can't survive prime95 for more than 10 minutes. It scores 26:23 on superpi 32m. Is this thing stable enough to do most applications and games? or will it turn off occasionaly due to its instability? Is prime95 a practicle application considering no typical program stresses the computer as much as it does?

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   09-03-2005 at 10:14:36 AM
- 0 +

Well I think I'm <A HREF="http://img398.imageshack.us/img398/6271/benchmark54hq.jpg" target="_new"> STABLE </A> at 2.8ghz. I am using the 5/6 ram divider at 255x11 (2.9v). The HTTlink is set to 3x so that I don't exceed 1ghz. Is there a perfomance hit for it being at 765 mhz? So far I can last 1 hour in prime95 and haven't tried longer. At 260x11 I can't pass it for 15 minutes no matter what. I think this is the higest I can go. What do you think?

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   09-03-2005 at 09:20:45 PM
- 0 +

Yeah I figured there would be some leftovers but I don't want to delve into that area yet. As for the proccessor being at 2.8ghz, should I use the tight timings and ram divider or go 1:1 with slacked timings?

What is wrong with my Superpi <A HREF="http://img26.imageshack.us/img26/3951/benchmark62rj.jpg" target="_new">TIME?</A>

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
t33lo   09-04-2005 at 01:15:14 AM
- 0 +

Yeah I tried running superpi at those settings and it gave me error about half way through on 32m. I think i'm throwin in the towel and just keep a stable oc at 2.6gHz or so.

<i>I pretend to know what I'm talking about.</i>

Reply to t33lo
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > CPUs > 1T/2T
Go to:

There are 779 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.192 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them
How do I win badges?