Configuring raid 0 with windows 7 professional
Last response: in Windows 7
how to configure raid 0 with Windows 7 Professional. Two raid drives with 1.5 terrabytes each. OS on seperate drive
More about : configuring raid windows professional
DanielJames said:
how to configure raid 0 with Windows 7 Professional. Two raid drives with 1.5 terrabytes each. OS on seperate driveWindows 7 has all the raid drivers you should need already installed, all you have to do is set up the drives in your bios to raid and then run the raid utility when the coputer is starting up which for ausus is ctrl-I at post. then bingo.
Related ressources:
- ForumSystem will not boot to Windows 7 Professional
- ForumConfiguring RAID 0 on Marvell 9128 (Board: Gigabyte GA X58 A UD3R rev 2. 0 )
- ForumProblem configuring Raid 1, Win 7 , Asus P 7 P55D-E Pro Mobo
- ForumAsus p8z77 deluxe raid will not work with Windows 7 Professional
- ForumRAID + Windows 2000 Professional
- Forum[Dual-boot] 32bit XP Professional w/ 64bit Windows 7 preinstalled
- ForumConfiguring RAID 0 with Soyo Dragon Plus
- ForumHDD Raid0 with OS on SSD
- ForumGood RAID Card for RAID 0 SSDs
- ForumInstalling raid 0 windows 7
- ForumAsus P 7 P55D PRO RAID 0 + Non- RAID
- Forum3xSSD Raid 0 drives under performing
- ForumClean build and install - cant install Windows 7 Professional 64 bit
- ForumWindow 7 this copy is not genuine
- ForumWindows 7 will not boot
- ForumBootmgr is compressed windows 7 fix without cd
- ForumProblems with adobe flash player 10 and windows 7
- Forum[Solved] Windows 7 Stuck on installation
- ForumWindows 7 does not display widescreen
- ForumWindows 7 freezes at welcome screen
- More resources
Read discussions in other Windows 7 categories
!
