MMC 9.0 "upgrade"

G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after
uninstalling 8.x? If so, i'd love to hear from you.

neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8.

The setup program will load/initialize and then simply disappear on me
without any error.

Help.

Alan
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

I went through the 8.9 uninstall and 9.0 install and everything worked as
normal.

Try using the Catuninstaller on

http://www.ati.com/support/drivers/misc/catalystutils.html

to completely remove all ATI software and then install MMC9.0
--
Aloke
----
to reply by e-mail remove 123 and change invalid to com

"Alan Olson" <aolson@wi.rr.com> wrote in message
news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
after
> uninstalling 8.x? If so, i'd love to hear from you.
>
> neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
8.8.
>
> The setup program will load/initialize and then simply disappear on me
> without any error.
>
> Help.
>
> Alan
>
>
 

spongebob

Distinguished
Apr 23, 2004
335
0
18,790
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

No problems either...used same procedure as Aloke.

"Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> I went through the 8.9 uninstall and 9.0 install and everything worked as
> normal.
>
> Try using the Catuninstaller on
>
> http://www.ati.com/support/drivers/misc/catalystutils.html
>
> to completely remove all ATI software and then install MMC9.0
> --
> Aloke
> ----
> to reply by e-mail remove 123 and change invalid to com
>
> "Alan Olson" <aolson@wi.rr.com> wrote in message
> news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> after
> > uninstalling 8.x? If so, i'd love to hear from you.
> >
> > neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
> 8.8.
> >
> > The setup program will load/initialize and then simply disappear on me
> > without any error.
> >
> > Help.
> >
> > Alan
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Obviously, after using CAT-uninstaller, you'll have to re-install all ATI
software, including drivers, DVD decoder, WDM driver, Guide+, everything.

It will give you a clean slate to start with.
--
Aloke
----
to reply by e-mail remove 123 and change invalid to com

> "Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
> news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> > I went through the 8.9 uninstall and 9.0 install and everything worked
as
> > normal.
> >
> > Try using the Catuninstaller on
> >
> > http://www.ati.com/support/drivers/misc/catalystutils.html
> >
> > to completely remove all ATI software and then install MMC9.0
> > --
> > Aloke
> > ----
> > to reply by e-mail remove 123 and change invalid to com
> >
> > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> > after
> > > uninstalling 8.x? If so, i'd love to hear from you.
> > >
> > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
uninstall
> > 8.8.
> > >
> > > The setup program will load/initialize and then simply disappear on me
> > > without any error.
> > >
> > > Help.
> > >
> > > Alan
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Why is a step like this necessary? Normally uninstalls and/or upgrades take
care of all this for you?

alan

"Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> I went through the 8.9 uninstall and 9.0 install and everything worked as
> normal.
>
> Try using the Catuninstaller on
>
> http://www.ati.com/support/drivers/misc/catalystutils.html
>
> to completely remove all ATI software and then install MMC9.0
> --
> Aloke
> ----
> to reply by e-mail remove 123 and change invalid to com
>
> "Alan Olson" <aolson@wi.rr.com> wrote in message
> news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> after
> > uninstalling 8.x? If so, i'd love to hear from you.
> >
> > neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
> 8.8.
> >
> > The setup program will load/initialize and then simply disappear on me
> > without any error.
> >
> > Help.
> >
> > Alan
> >
> >
>
>
 

jad

Distinguished
Mar 30, 2004
1,324
0
19,280
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

the day that an ' upgrade ' goes the way ' we ' want it to , is the
day hell freezes over.


"Alan Olson" <aolson@wi.rr.com> wrote in message
news:Siaic.30272$lS2.2894@twister.rdc-kc.rr.com...
> Why is a step like this necessary? Normally uninstalls and/or
upgrades take
> care of all this for you?
>
> alan
>
> "Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
> news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> > I went through the 8.9 uninstall and 9.0 install and everything
worked as
> > normal.
> >
> > Try using the Catuninstaller on
> >
> > http://www.ati.com/support/drivers/misc/catalystutils.html
> >
> > to completely remove all ATI software and then install MMC9.0
> > --
> > Aloke
> > ----
> > to reply by e-mail remove 123 and change invalid to com
> >
> > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > Has anyone been able to install MMC 9.0 over 8.x? Or even
install 9.0
> > after
> > > uninstalling 8.x? If so, i'd love to hear from you.
> > >
> > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
uninstall
> > 8.8.
> > >
> > > The setup program will load/initialize and then simply disappear
on me
> > > without any error.
> > >
> > > Help.
> > >
> > > Alan
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

OK,

I uninstalled 8.8.

I ran the catuninstaller.

i rebooted.

I reinstalled the WDM.

I rebooted.

XP found all the "new" hardware.

I launched the 9.0 install.

same thing happened. it extracted the files, it initialized the installer.
The installer disappeared AGAIN without any error.

alan

"Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> I went through the 8.9 uninstall and 9.0 install and everything worked as
> normal.
>
> Try using the Catuninstaller on
>
> http://www.ati.com/support/drivers/misc/catalystutils.html
>
> to completely remove all ATI software and then install MMC9.0
> --
> Aloke
> ----
> to reply by e-mail remove 123 and change invalid to com
>
> "Alan Olson" <aolson@wi.rr.com> wrote in message
> news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> after
> > uninstalling 8.x? If so, i'd love to hear from you.
> >
> > neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
> 8.8.
> >
> > The setup program will load/initialize and then simply disappear on me
> > without any error.
> >
> > Help.
> >
> > Alan
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Find the folder ATI\support\ and the mmc folder there. Try running
setup.exe to see if it will install that way. Do you have more than one WDM
installed? If so, uninstall that and reinstall the ATI WDM. Reboot and
cancel any "new hardware found" installation and do it manually.

"Alan Olson" <aolson@wi.rr.com> wrote in message
news:HDaic.30427$lS2.22223@twister.rdc-kc.rr.com...
> OK,
>
> I uninstalled 8.8.
>
> I ran the catuninstaller.
>
> i rebooted.
>
> I reinstalled the WDM.
>
> I rebooted.
>
> XP found all the "new" hardware.
>
> I launched the 9.0 install.
>
> same thing happened. it extracted the files, it initialized the
installer.
> The installer disappeared AGAIN without any error.
>
> alan
>
> "Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
> news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> > I went through the 8.9 uninstall and 9.0 install and everything worked
as
> > normal.
> >
> > Try using the Catuninstaller on
> >
> > http://www.ati.com/support/drivers/misc/catalystutils.html
> >
> > to completely remove all ATI software and then install MMC9.0
> > --
> > Aloke
> > ----
> > to reply by e-mail remove 123 and change invalid to com
> >
> > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> > after
> > > uninstalling 8.x? If so, i'd love to hear from you.
> > >
> > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
uninstall
> > 8.8.
> > >
> > > The setup program will load/initialize and then simply disappear on me
> > > without any error.
> > >
> > > Help.
> > >
> > > Alan
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Running it from that directory does the same exact thing.

From the control panel/Administrative/Device manager - there is only one WDM
installed.

How do i uninstall the WDM?

alan

"diener" <pdiener_nospam@qwest.net> wrote in message
news:c6bp4f$a44sk$1@ID-139546.news.uni-berlin.de...
> Find the folder ATI\support\ and the mmc folder there. Try running
> setup.exe to see if it will install that way. Do you have more than one
WDM
> installed? If so, uninstall that and reinstall the ATI WDM. Reboot and
> cancel any "new hardware found" installation and do it manually.
>
> "Alan Olson" <aolson@wi.rr.com> wrote in message
> news:HDaic.30427$lS2.22223@twister.rdc-kc.rr.com...
> > OK,
> >
> > I uninstalled 8.8.
> >
> > I ran the catuninstaller.
> >
> > i rebooted.
> >
> > I reinstalled the WDM.
> >
> > I rebooted.
> >
> > XP found all the "new" hardware.
> >
> > I launched the 9.0 install.
> >
> > same thing happened. it extracted the files, it initialized the
> installer.
> > The installer disappeared AGAIN without any error.
> >
> > alan
> >
> > "Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
> > news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> > > I went through the 8.9 uninstall and 9.0 install and everything worked
> as
> > > normal.
> > >
> > > Try using the Catuninstaller on
> > >
> > > http://www.ati.com/support/drivers/misc/catalystutils.html
> > >
> > > to completely remove all ATI software and then install MMC9.0
> > > --
> > > Aloke
> > > ----
> > > to reply by e-mail remove 123 and change invalid to com
> > >
> > > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > > Has anyone been able to install MMC 9.0 over 8.x? Or even install
9.0
> > > after
> > > > uninstalling 8.x? If so, i'd love to hear from you.
> > > >
> > > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
> uninstall
> > > 8.8.
> > > >
> > > > The setup program will load/initialize and then simply disappear on
me
> > > > without any error.
> > > >
> > > > Help.
> > > >
> > > > Alan
> > > >
> > > >
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

"Alan Olson" <aolson@wi.rr.com> wrote in message
news:_Seic.7316$kk7.5721@twister.rdc-kc.rr.com...
> Running it from that directory does the same exact thing.
>
> From the control panel/Administrative/Device manager - there is only one
WDM
> installed.
>
> How do i uninstall the WDM?
>
> alan
>
I had the same problem. Be sure you do not use the wdm that is on the ati
install cd. catalyst 4.4 will not work with it...

here is my install...

A real mess if not done xxxxx

remove control panel
do not select reboot
remove drivers
select reboot

windows media encoder 9 must be installed
dat jet database must be installed
dirext x 9 must be installed

the files:

mmc-8-1-0-0dao-mdac.exe
It will install 3 or four times, only 1 needs to be there/ add remove
programs.

mmc-9-0-0-0.exe multimedia center 9.0
It req tv-capture-wdm-6-14-10-6227.exe
Install before multimedia center

You will see these items present, device manger/system:

acti wdm rage theather audio
ati wdm rage theater video
ati wdm specialized mvd codec
ati wdm specialized pcd codec
ati wdm tv audio cross bar
ati wdm tv tuner

display drivers:
xcp-mce-8-00-040322a-014266c.exe

these are catalysts 4.4

All is working fine with my ati 9600 pro and my aiw 9600, captures are
great, and the new option to encode to divx.

my 2 cents
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

In my case, the usual uninstall-install of newer versions has worked for the
last 12 months.

The CAT-uninstaller must do a better job of removing ATI software. That's
why ATI wrote it (I assume).
--
Aloke
----
to reply by e-mail remove 123 and change invalid to com

"Alan Olson" <aolson@wi.rr.com> wrote in message
news:Siaic.30272$lS2.2894@twister.rdc-kc.rr.com...
> Why is a step like this necessary? Normally uninstalls and/or upgrades
take
> care of all this for you?
>
> alan
>
> "Aloke Prasad" <aprasad123@columbus.rr.invalid> wrote in message
> news:DN6ic.60857$B%4.56582@fe2.columbus.rr.com...
> > I went through the 8.9 uninstall and 9.0 install and everything worked
as
> > normal.
> >
> > Try using the Catuninstaller on
> >
> > http://www.ati.com/support/drivers/misc/catalystutils.html
> >
> > to completely remove all ATI software and then install MMC9.0
> > --
> > Aloke
> > ----
> > to reply by e-mail remove 123 and change invalid to com
> >
> > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> > after
> > > uninstalling 8.x? If so, i'd love to hear from you.
> > >
> > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
uninstall
> > 8.8.
> > >
> > > The setup program will load/initialize and then simply disappear on me
> > > without any error.
> > >
> > > Help.
> > >
> > > Alan
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

I had the same problem. Be sure you do not use the wdm that is on the ati
install cd. catalyst 4.4 will not work with it...

here is my install...

A real mess if not done xxxxx

remove control panel
do not select reboot
remove drivers
select reboot

windows media encoder 9 must be installed
dat jet database must be installed
dirext x 9 must be installed

the files:

mmc-8-1-0-0dao-mdac.exe
It will install 3 or four times, only 1 needs to be there/ add remove
programs.

mmc-9-0-0-0.exe multimedia center 9.0
It req tv-capture-wdm-6-14-10-6227.exe
Install before multimedia center

You will see these items present, device manger/system:

acti wdm rage theather audio
ati wdm rage theater video
ati wdm specialized mvd codec
ati wdm specialized pcd codec
ati wdm tv audio cross bar
ati wdm tv tuner

display drivers:
xcp-mce-8-00-040322a-014266c.exe

these are catalysts 4.4

All is working fine with my ati 9600 pro and my aiw 9600, captures are
great, and the new option to encode to divx.

my 2 cents

"Alan Olson" <aolson@wi.rr.com> wrote in message
news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
after
> uninstalling 8.x? If so, i'd love to hear from you.
>
> neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
8.8.
>
> The setup program will load/initialize and then simply disappear on me
> without any error.
>
> Help.
>
> Alan
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Allot of people are having this problem, currently no solution other than using 8.8
http://www.rage3d.com/board/showthread.php?s=&threadid=33753208

--

----------------------------------------------------------------
"Alan Olson" <aolson@wi.rr.com> wrote in message news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0 after
> uninstalling 8.x? If so, i'd love to hear from you.
>
> neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall 8.8.
>
> The setup program will load/initialize and then simply disappear on me
> without any error.
>
> Help.
>
> Alan
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

I emailed ATI's customer care center and got a canned answer back, which was
of no help. I called ATI Customer Service today and the support rep said
this was a known issue and told me to drop back to 8.8 and there is no ETA
on 9.1. If you ask me, that is pathetic. There wasn't the slightest effort
to try and work on the problem. I did some digging on InstallShield's
website and goto a couple of additional parameters to include in the setup
syntax to hopefully figure out where it is bailing on me. Here is results
of...
C:\ATI\support\mmc-9-0-0-0>Setup.exe
/Verbose"C:\ATI\support\mmc-9-0-0-0\package.log"

If anyone can decipher this, then perhaps you can share your thoughts.


=== Verbose logging started: 4/26/2004 20:18:32 Build type: SHIP UNICODE
2.00.2600.1106 Calling process:
C:\PROGRA~1\COMMON~1\INSTAL~1\Driver\7\INTEL3~1\IDriver.exe ===
=== Logging started: 4/26/2004 20:18:32 ===
1: 7.06.262.0
1: InstallShield Install driver started, version:7.06.262.0
1: Package Path: C:\WINDOWS\Downloaded
Installations\{89143E9E-3170-4469-BFF4-F3B45ECE5207}\MMC90.msi
1: Command Line: /verbose"C:\ATI\support\mmc-9-0-0-0\package.log" /v
/v"SETUPEXEDIR=\"C:\ATI\support\mmc-9-0-0-0\""
1: Extract supporting files
1: InstallShield Support files extracted.
1: Ready to launch UI sequence.
Action start 20:18:32: ISVerifyScriptingRuntime.
Action ended 20:18:32: ISVerifyScriptingRuntime. Return value 1.
Action start 20:18:32: ISSetupFilesExtract.
1: Starting to extract setup files
1: Getting SUPPORTDIR property :
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
1: Extracting SetupFiles to:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
1: Getting ISSetupFile table view
1: Executing ISSetupFile table view
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
T.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FindPr
oc.dll
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\regist
er.exe
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\LICENS
E.TXT
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
xx.dft
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
xx.vxd
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
xx.sys
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
xx.ini
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiisc
ds.dll
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
xx.dll
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
xx.enu
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\RegNoM
MC.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_81
443_DVD.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
N.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\TVICON
..reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
N.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\uinMMC
801.iss
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\lpadic
on.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\CDAICO
N.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVDICO
N.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_67
423.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MFPICO
N.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\mlib.r
eg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
TD.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLC
A.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
H.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
HD.reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_B_
500x60-24.bmp
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_A_
220x370-24.bmp
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
220x370_24.bmp
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_B_
500x60-24.bmp
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
167x303_24.bmp
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FMICON
..reg
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiusb
dx.dll
1: Extracting Setup File:
1:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCVIV
O.reg
1: Settign SUPPORTDIR property to:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
1: Setting ISSETUPFILESCOMPLETED property
Action ended 20:18:34: ISSetupFilesExtract. Return value 1.
Action start 20:18:34: AppSearch.
Action ended 20:18:34: AppSearch. Return value 1.
Action start 20:18:34:
IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375.
Action ended 20:18:34:
IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375. Return value 1.
Action start 20:18:34: CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
Action ended 20:18:34: CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
Return value 1.
Action start 20:18:34: LaunchConditions.
Action ended 20:18:34: LaunchConditions. Return value 1.
Action start 20:18:34: FindRelatedProducts.
Action ended 20:18:34: FindRelatedProducts. Return value 1.
Action start 20:18:34: ValidateProductID.
Action ended 20:18:34: ValidateProductID. Return value 1.
Action start 20:18:34: CostInitialize.
Action ended 20:18:34: CostInitialize. Return value 1.
Action start 20:18:34: FileCost.
Action ended 20:18:34: FileCost. Return value 1.
Action start 20:18:34: IsolateComponents.
Action ended 20:18:34: IsolateComponents. Return value 1.
Action start 20:18:34: ResolveSource.
Action ended 20:18:34: ResolveSource. Return value 1.
Action start 20:18:34: CostFinalize.
Action ended 20:18:34: CostFinalize. Return value 1.
Action start 20:18:34: SetARPReadme.
Action ended 20:18:34: SetARPReadme. Return value 1.
Action start 20:18:34: MigrateFeatureStates.
Action ended 20:18:34: MigrateFeatureStates. Return value 0.
Action start 20:18:34: ISSetupFilesCleanup.
1: Standard project type, let scripting engine clean up setup
files...skipping action
Action ended 20:18:34: ISSetupFilesCleanup. Return value 1.
1: Ready to initialize IDriver.
1: Inside Initialize, ref count is 1
1: Inside Open Script
1: Script engine cocreated.
1: Opening script:
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\setup.
inx
1: InstallShield script openned successfully.
1: Ready to initialize full UI support.
1: Ready to initialize the script...
1: Opening cab file...
1: Registering cab file...
1: Invoking __ISRTInit...
1: Invoking __ISWIMsiHandle...
1: Invoking __SetMaintenance...
1: Getting feature log...
1: __ISRTSetComponentLog...
1: Invoking __ISWIInit...
1: Setting external UI handler...
1: Creating file moniker...
1: Getting running object table...
1: Registering service to ROT table...
1: Marshalling IDriver for RPC service...
1: Ready to launch program block.
1: Installation aborts, ready for RPC shutting down.
1: User aborts the installation, ready to launch __OnAbort.
1: Ready to Uninitialize...
1: Shutting down all services
1: Invoking __ISRTRestoreMainLog...
1: Invoking __ISWIUninit...
=== Verbose logging stopped: 4/26/2004 20:18:40 ===




"David B." <NoMail@NOSPAM.net> wrote in message
news:xCYic.21566$YP5.1609350@attbi_s02...
> Allot of people are having this problem, currently no solution other than
using 8.8
> http://www.rage3d.com/board/showthread.php?s=&threadid=33753208
>
> --
>
> ----------------------------------------------------------------
> "Alan Olson" <aolson@wi.rr.com> wrote in message
news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
after
> > uninstalling 8.x? If so, i'd love to hear from you.
> >
> > neither 8.9 nor 9.0 would install for me over 8.8, or after i uninstall
8.8.
> >
> > The setup program will load/initialize and then simply disappear on me
> > without any error.
> >
> > Help.
> >
> > Alan
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Looks to me like you've got the RPC service disabled?

Or maybe you've not patched it yet to stop Blaster (although this would mean
your pc would want to reboot approx. every min.)?

"john smith" <someone@microsoft.com> wrote in message
news:EMjjc.62896$yv.2056615@twister.southeast.rr.com...
> I emailed ATI's customer care center and got a canned answer back, which
was
> of no help. I called ATI Customer Service today and the support rep said
> this was a known issue and told me to drop back to 8.8 and there is no ETA
> on 9.1. If you ask me, that is pathetic. There wasn't the slightest
effort
> to try and work on the problem. I did some digging on InstallShield's
> website and goto a couple of additional parameters to include in the setup
> syntax to hopefully figure out where it is bailing on me. Here is results
> of...
> C:\ATI\support\mmc-9-0-0-0>Setup.exe
> /Verbose"C:\ATI\support\mmc-9-0-0-0\package.log"
>
> If anyone can decipher this, then perhaps you can share your thoughts.
>
>
> === Verbose logging started: 4/26/2004 20:18:32 Build type: SHIP UNICODE
> 2.00.2600.1106 Calling process:
> C:\PROGRA~1\COMMON~1\INSTAL~1\Driver\7\INTEL3~1\IDriver.exe ===
> === Logging started: 4/26/2004 20:18:32 ===
> 1: 7.06.262.0
> 1: InstallShield Install driver started, version:7.06.262.0
> 1: Package Path: C:\WINDOWS\Downloaded
> Installations\{89143E9E-3170-4469-BFF4-F3B45ECE5207}\MMC90.msi
> 1: Command Line: /verbose"C:\ATI\support\mmc-9-0-0-0\package.log" /v
> /v"SETUPEXEDIR=\"C:\ATI\support\mmc-9-0-0-0\""
> 1: Extract supporting files
> 1: InstallShield Support files extracted.
> 1: Ready to launch UI sequence.
> Action start 20:18:32: ISVerifyScriptingRuntime.
> Action ended 20:18:32: ISVerifyScriptingRuntime. Return value 1.
> Action start 20:18:32: ISSetupFilesExtract.
> 1: Starting to extract setup files
> 1: Getting SUPPORTDIR property :
> C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> 1: Extracting SetupFiles to:
> C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> 1: Getting ISSetupFile table view
> 1: Executing ISSetupFile table view
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
> T.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FindPr
> oc.dll
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\regist
> er.exe
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\LICENS
> E.TXT
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
> xx.dft
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> xx.vxd
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> xx.sys
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> xx.ini
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiisc
> ds.dll
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> xx.dll
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
> xx.enu
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\RegNoM
> MC.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_81
> 443_DVD.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
> N.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\TVICON
> .reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
> N.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\uinMMC
> 801.iss
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\lpadic
> on.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\CDAICO
> N.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVDICO
> N.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_67
> 423.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MFPICO
> N.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\mlib.r
> eg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
> TD.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLC
> A.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
> H.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
> HD.reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_B_
> 500x60-24.bmp
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_A_
> 220x370-24.bmp
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
> 220x370_24.bmp
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_B_
> 500x60-24.bmp
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
> 167x303_24.bmp
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FMICON
> .reg
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiusb
> dx.dll
> 1: Extracting Setup File:
> 1:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCVIV
> O.reg
> 1: Settign SUPPORTDIR property to:
> C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> 1: Setting ISSETUPFILESCOMPLETED property
> Action ended 20:18:34: ISSetupFilesExtract. Return value 1.
> Action start 20:18:34: AppSearch.
> Action ended 20:18:34: AppSearch. Return value 1.
> Action start 20:18:34:
> IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375.
> Action ended 20:18:34:
> IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375. Return value 1.
> Action start 20:18:34: CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
> Action ended 20:18:34: CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
> Return value 1.
> Action start 20:18:34: LaunchConditions.
> Action ended 20:18:34: LaunchConditions. Return value 1.
> Action start 20:18:34: FindRelatedProducts.
> Action ended 20:18:34: FindRelatedProducts. Return value 1.
> Action start 20:18:34: ValidateProductID.
> Action ended 20:18:34: ValidateProductID. Return value 1.
> Action start 20:18:34: CostInitialize.
> Action ended 20:18:34: CostInitialize. Return value 1.
> Action start 20:18:34: FileCost.
> Action ended 20:18:34: FileCost. Return value 1.
> Action start 20:18:34: IsolateComponents.
> Action ended 20:18:34: IsolateComponents. Return value 1.
> Action start 20:18:34: ResolveSource.
> Action ended 20:18:34: ResolveSource. Return value 1.
> Action start 20:18:34: CostFinalize.
> Action ended 20:18:34: CostFinalize. Return value 1.
> Action start 20:18:34: SetARPReadme.
> Action ended 20:18:34: SetARPReadme. Return value 1.
> Action start 20:18:34: MigrateFeatureStates.
> Action ended 20:18:34: MigrateFeatureStates. Return value 0.
> Action start 20:18:34: ISSetupFilesCleanup.
> 1: Standard project type, let scripting engine clean up setup
> files...skipping action
> Action ended 20:18:34: ISSetupFilesCleanup. Return value 1.
> 1: Ready to initialize IDriver.
> 1: Inside Initialize, ref count is 1
> 1: Inside Open Script
> 1: Script engine cocreated.
> 1: Opening script:
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\setup.
> inx
> 1: InstallShield script openned successfully.
> 1: Ready to initialize full UI support.
> 1: Ready to initialize the script...
> 1: Opening cab file...
> 1: Registering cab file...
> 1: Invoking __ISRTInit...
> 1: Invoking __ISWIMsiHandle...
> 1: Invoking __SetMaintenance...
> 1: Getting feature log...
> 1: __ISRTSetComponentLog...
> 1: Invoking __ISWIInit...
> 1: Setting external UI handler...
> 1: Creating file moniker...
> 1: Getting running object table...
> 1: Registering service to ROT table...
> 1: Marshalling IDriver for RPC service...
> 1: Ready to launch program block.
> 1: Installation aborts, ready for RPC shutting down.
> 1: User aborts the installation, ready to launch __OnAbort.
> 1: Ready to Uninitialize...
> 1: Shutting down all services
> 1: Invoking __ISRTRestoreMainLog...
> 1: Invoking __ISWIUninit...
> === Verbose logging stopped: 4/26/2004 20:18:40 ===
>
>
>
>
> "David B." <NoMail@NOSPAM.net> wrote in message
> news:xCYic.21566$YP5.1609350@attbi_s02...
> > Allot of people are having this problem, currently no solution other
than
> using 8.8
> > http://www.rage3d.com/board/showthread.php?s=&threadid=33753208
> >
> > --
> >
> > ----------------------------------------------------------------
> > "Alan Olson" <aolson@wi.rr.com> wrote in message
> news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > Has anyone been able to install MMC 9.0 over 8.x? Or even install 9.0
> after
> > > uninstalling 8.x? If so, i'd love to hear from you.
> > >
> > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
uninstall
> 8.8.
> > >
> > > The setup program will load/initialize and then simply disappear on me
> > > without any error.
> > >
> > > Help.
> > >
> > > Alan
> > >
> > >
> >
> >
>
>
 
G

Guest

Guest
Archived from groups: alt.comp.periphs.videocards.ati (More info?)

No, this isn't correct either. I have hte RPC service running and it still
fails to install.

"pjp" <pjp_is_located_at_@_hotmail_._com> wrote in message
news:Keujc.30264$Np3.1084642@ursa-nb00s0.nbnet.nb.ca...
> Looks to me like you've got the RPC service disabled?
>
> Or maybe you've not patched it yet to stop Blaster (although this would
mean
> your pc would want to reboot approx. every min.)?
>
> "john smith" <someone@microsoft.com> wrote in message
> news:EMjjc.62896$yv.2056615@twister.southeast.rr.com...
> > I emailed ATI's customer care center and got a canned answer back, which
> was
> > of no help. I called ATI Customer Service today and the support rep
said
> > this was a known issue and told me to drop back to 8.8 and there is no
ETA
> > on 9.1. If you ask me, that is pathetic. There wasn't the slightest
> effort
> > to try and work on the problem. I did some digging on InstallShield's
> > website and goto a couple of additional parameters to include in the
setup
> > syntax to hopefully figure out where it is bailing on me. Here is
results
> > of...
> > C:\ATI\support\mmc-9-0-0-0>Setup.exe
> > /Verbose"C:\ATI\support\mmc-9-0-0-0\package.log"
> >
> > If anyone can decipher this, then perhaps you can share your thoughts.
> >
> >
> > === Verbose logging started: 4/26/2004 20:18:32 Build type: SHIP
UNICODE
> > 2.00.2600.1106 Calling process:
> > C:\PROGRA~1\COMMON~1\INSTAL~1\Driver\7\INTEL3~1\IDriver.exe ===
> > === Logging started: 4/26/2004 20:18:32 ===
> > 1: 7.06.262.0
> > 1: InstallShield Install driver started, version:7.06.262.0
> > 1: Package Path: C:\WINDOWS\Downloaded
> > Installations\{89143E9E-3170-4469-BFF4-F3B45ECE5207}\MMC90.msi
> > 1: Command Line: /verbose"C:\ATI\support\mmc-9-0-0-0\package.log" /v
> > /v"SETUPEXEDIR=\"C:\ATI\support\mmc-9-0-0-0\""
> > 1: Extract supporting files
> > 1: InstallShield Support files extracted.
> > 1: Ready to launch UI sequence.
> > Action start 20:18:32: ISVerifyScriptingRuntime.
> > Action ended 20:18:32: ISVerifyScriptingRuntime. Return value 1.
> > Action start 20:18:32: ISSetupFilesExtract.
> > 1: Starting to extract setup files
> > 1: Getting SUPPORTDIR property :
> > C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> > 1: Extracting SetupFiles to:
> > C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> > 1: Getting ISSetupFile table view
> > 1: Executing ISSetupFile table view
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
> > T.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FindPr
> > oc.dll
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\regist
> > er.exe
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\LICENS
> > E.TXT
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
> > xx.dft
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> > xx.vxd
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> > xx.sys
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> > xx.ini
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiisc
> > ds.dll
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiicd
> > xx.dll
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atricd
> > xx.enu
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\RegNoM
> > MC.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_81
> > 443_DVD.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
> > N.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\TVICON
> > .reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\VCDICO
> > N.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\uinMMC
> > 801.iss
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\lpadic
> > on.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\CDAICO
> > N.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVDICO
> > N.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\EPR_67
> > 423.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MFPICO
> > N.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\mlib.r
> > eg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLB
> > TD.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLC
> > A.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
> > H.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCPLT
> > HD.reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_B_
> > 500x60-24.bmp
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\DVD_A_
> > 220x370-24.bmp
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
> > 220x370_24.bmp
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_B_
> > 500x60-24.bmp
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMC_A_
> > 167x303_24.bmp
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\FMICON
> > .reg
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\atiusb
> > dx.dll
> > 1: Extracting Setup File:
> > 1:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\MMCVIV
> > O.reg
> > 1: Settign SUPPORTDIR property to:
> > C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}
> > 1: Setting ISSETUPFILESCOMPLETED property
> > Action ended 20:18:34: ISSetupFilesExtract. Return value 1.
> > Action start 20:18:34: AppSearch.
> > Action ended 20:18:34: AppSearch. Return value 1.
> > Action start 20:18:34:
> > IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375.
> > Action ended 20:18:34:
> > IsLaunchConditions.6FC97963_2511_11D4_BB8A_00C04F20D375. Return value 1.
> > Action start 20:18:34:
CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
> > Action ended 20:18:34:
CheckForDCOM.6FC97963_2511_11D4_BB8A_00C04F20D375.
> > Return value 1.
> > Action start 20:18:34: LaunchConditions.
> > Action ended 20:18:34: LaunchConditions. Return value 1.
> > Action start 20:18:34: FindRelatedProducts.
> > Action ended 20:18:34: FindRelatedProducts. Return value 1.
> > Action start 20:18:34: ValidateProductID.
> > Action ended 20:18:34: ValidateProductID. Return value 1.
> > Action start 20:18:34: CostInitialize.
> > Action ended 20:18:34: CostInitialize. Return value 1.
> > Action start 20:18:34: FileCost.
> > Action ended 20:18:34: FileCost. Return value 1.
> > Action start 20:18:34: IsolateComponents.
> > Action ended 20:18:34: IsolateComponents. Return value 1.
> > Action start 20:18:34: ResolveSource.
> > Action ended 20:18:34: ResolveSource. Return value 1.
> > Action start 20:18:34: CostFinalize.
> > Action ended 20:18:34: CostFinalize. Return value 1.
> > Action start 20:18:34: SetARPReadme.
> > Action ended 20:18:34: SetARPReadme. Return value 1.
> > Action start 20:18:34: MigrateFeatureStates.
> > Action ended 20:18:34: MigrateFeatureStates. Return value 0.
> > Action start 20:18:34: ISSetupFilesCleanup.
> > 1: Standard project type, let scripting engine clean up setup
> > files...skipping action
> > Action ended 20:18:34: ISSetupFilesCleanup. Return value 1.
> > 1: Ready to initialize IDriver.
> > 1: Inside Initialize, ref count is 1
> > 1: Inside Open Script
> > 1: Script engine cocreated.
> > 1: Opening script:
> >
>
C:\DOCUME~1\Home\LOCALS~1\Temp\{9C71BE6E-27D2-491E-810A-C21A015592CD}\setup.
> > inx
> > 1: InstallShield script openned successfully.
> > 1: Ready to initialize full UI support.
> > 1: Ready to initialize the script...
> > 1: Opening cab file...
> > 1: Registering cab file...
> > 1: Invoking __ISRTInit...
> > 1: Invoking __ISWIMsiHandle...
> > 1: Invoking __SetMaintenance...
> > 1: Getting feature log...
> > 1: __ISRTSetComponentLog...
> > 1: Invoking __ISWIInit...
> > 1: Setting external UI handler...
> > 1: Creating file moniker...
> > 1: Getting running object table...
> > 1: Registering service to ROT table...
> > 1: Marshalling IDriver for RPC service...
> > 1: Ready to launch program block.
> > 1: Installation aborts, ready for RPC shutting down.
> > 1: User aborts the installation, ready to launch __OnAbort.
> > 1: Ready to Uninitialize...
> > 1: Shutting down all services
> > 1: Invoking __ISRTRestoreMainLog...
> > 1: Invoking __ISWIUninit...
> > === Verbose logging stopped: 4/26/2004 20:18:40 ===
> >
> >
> >
> >
> > "David B." <NoMail@NOSPAM.net> wrote in message
> > news:xCYic.21566$YP5.1609350@attbi_s02...
> > > Allot of people are having this problem, currently no solution other
> than
> > using 8.8
> > > http://www.rage3d.com/board/showthread.php?s=&threadid=33753208
> > >
> > > --
> > >
> > > ----------------------------------------------------------------
> > > "Alan Olson" <aolson@wi.rr.com> wrote in message
> > news:9VZhc.29484$lS2.6887@twister.rdc-kc.rr.com...
> > > > Has anyone been able to install MMC 9.0 over 8.x? Or even install
9.0
> > after
> > > > uninstalling 8.x? If so, i'd love to hear from you.
> > > >
> > > > neither 8.9 nor 9.0 would install for me over 8.8, or after i
> uninstall
> > 8.8.
> > > >
> > > > The setup program will load/initialize and then simply disappear on
me
> > > > without any error.
> > > >
> > > > Help.
> > > >
> > > > Alan
> > > >
> > > >
> > >
> > >
> >
> >
>
>