How do i install 9800 pro from Nvidia

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

How do Install my 9800 pro after been using the 56.72 with my GF4 TI 4600.

 

[wookie]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

- Download newest ATI driver files (4.6) from ATI and save to your hard
drive
- download driver cleaner - do google searh - and install on your computer -
but don't remove naything yet
- Uninstall Nvidia drivers using Windows remove program.
- Power down
- Take out Nvidia card and install ATI card .. don't forget to plug in power
cord on teh ATI card
- boot up in safemode and then run drvier cleaner and get rid of Nviida
stuff - directions are pretty easy
- reboot and computer will find new hardware and then install the new ATI
driver set you just downloaded
- enjoy

"wired and confused" <johnsongerry@comcast.net> wrote in message
newsv6yc.1858$zz.1827@attbi_s04...
> How do Install my 9800 pro after been using the 56.72 with my GF4 TI 4600.
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

Good Lord, just add/remove programs the Nvidia drivers. Swap out the card
and load up the new ATI drivers. That's all I did....

"Wookie" <Tom@comcast.net> wrote in message
news:eF8yc.6801$2i5.6229@attbi_s52...
> - Download newest ATI driver files (4.6) from ATI and save to your hard
> drive
> - download driver cleaner - do google searh - and install on your
computer -
> but don't remove naything yet
> - Uninstall Nvidia drivers using Windows remove program.
> - Power down
> - Take out Nvidia card and install ATI card .. don't forget to plug in
power
> cord on teh ATI card
> - boot up in safemode and then run drvier cleaner and get rid of Nviida
> stuff - directions are pretty easy
> - reboot and computer will find new hardware and then install the new ATI
> driver set you just downloaded
> - enjoy
>
> "wired and confused" <johnsongerry@comcast.net> wrote in message
> newsv6yc.1858$zz.1827@attbi_s04...
> > How do Install my 9800 pro after been using the 56.72 with my GF4 TI
4600.
> >
> >
>
>

 

[augustus]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

"Kill Bill" <a@b.c> wrote in message
newsX8yc.8962$Ko5.317@twister.socal.rr.com...
> Good Lord, just add/remove programs the Nvidia drivers. Swap out the
card
> and load up the new ATI drivers. That's all I did....

That does not always work well. I went from a Geforce2 GTS Ultra to a Radeon
9100 and just uninstalling via add/remove was not enough. The 9100 had major
issues with stability and slow screen draws. After I thoroughly scoured out
all Nvidia registry references and Nvidia files it ran normally.

 

[wookie]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

The process of running drive cleaner takes about 5 minutes or less. Clean
that stuff up. I went from a 4400 to a 9800 Pro and did the same steps as I
described and did not have ANY problems.

"Kill Bill" <a@b.c> wrote in message
newsX8yc.8962$Ko5.317@twister.socal.rr.com...
> Good Lord, just add/remove programs the Nvidia drivers. Swap out the
card
> and load up the new ATI drivers. That's all I did....
>
> "Wookie" <Tom@comcast.net> wrote in message
> news:eF8yc.6801$2i5.6229@attbi_s52...
> > - Download newest ATI driver files (4.6) from ATI and save to your hard
> > drive
> > - download driver cleaner - do google searh - and install on your
> computer -
> > but don't remove naything yet
> > - Uninstall Nvidia drivers using Windows remove program.
> > - Power down
> > - Take out Nvidia card and install ATI card .. don't forget to plug in
> power
> > cord on teh ATI card
> > - boot up in safemode and then run drvier cleaner and get rid of Nviida
> > stuff - directions are pretty easy
> > - reboot and computer will find new hardware and then install the new
ATI
> > driver set you just downloaded
> > - enjoy
> >
> > "wired and confused" <johnsongerry@comcast.net> wrote in message
> > newsv6yc.1858$zz.1827@attbi_s04...
> > > How do Install my 9800 pro after been using the 56.72 with my GF4 TI
> 4600.
> > >
> > >
> >
> >
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.videocards.ati (More info?)

On Fri, 11 Jun 2004 02:19:54 GMT, "Wookie" <Tom@comcast.net> wrote:

>- Download newest ATI driver files (4.6) from ATI and save to your hard
>drive
>- download driver cleaner - do google searh - and install on your computer -
>but don't remove naything yet
>- Uninstall Nvidia drivers using Windows remove program.
>- Power down
>- Take out Nvidia card and install ATI card .. don't forget to plug in power
>cord on teh ATI card
>- boot up in safemode and then run drvier cleaner and get rid of Nviida
>stuff - directions are pretty easy
>- reboot and computer will find new hardware and then install the new ATI
>driver set you just downloaded
>- enjoy
>

One quibble with that, Wookie - when Windows finds the new hardware,
cancel out of the Wizard. Don't use it to try to install the drivers.
_Then_ run the driver installation .exe. ;-)


>"wired and confused" <johnsongerry@comcast.net> wrote in message
>newsv6yc.1858$zz.1827@attbi_s04...
>> How do Install my 9800 pro after been using the 56.72 with my GF4 TI 4600.
>>
>>
>


patrickp

patrickp@5acoustibop.co.uk - take five to email me