SP2 Firewall Exceptions

[Guest]

Archived from groups: microsoft.public.windowsxp.security_admin (More info?)

Hi, everyone:

Does anyone know of a way to get Windows Firewall to allow access on all
ports to a specified IP address or subnet? I ask because I can allow specific
ports, but wildcards like "*" don't seem to work.

Ideally, this would be done through group policy, but any means necessary
would be a good start.

Any thoughts out there?
--
Steve Athanas
Systems Analyst / Administrator

UMass Lowell Student Affairs
Cumnock Hall
1 University Ave.
Lowell, MA 01854

 

[Guest]

Archived from groups: microsoft.public.windowsxp.security_admin (More info?)

The ipsec bypass feature can be used for this purpose. It relies on the
authentication of the other peer using ipsec, then consults the Active
Directory against a group policy defined set of allowed computers which can
access all ports. This is really only going to be available in a corporate
environment.

--
David
Microsoft Windows Networking
This posting is provided "AS IS" with no warranties, and confers no rights.


"Steve Athanas" <SteveAthanas@discussions.microsoft.com> wrote in message
news:F4139028-F082-4D29-B36A-D236AF59BB4B@microsoft.com...
> Hi, everyone:
>
> Does anyone know of a way to get Windows Firewall to allow access on all
> ports to a specified IP address or subnet? I ask because I can allow
> specific
> ports, but wildcards like "*" don't seem to work.
>
> Ideally, this would be done through group policy, but any means necessary
> would be a good start.
>
> Any thoughts out there?
> --
> Steve Athanas
> Systems Analyst / Administrator
>
> UMass Lowell Student Affairs
> Cumnock Hall
> 1 University Ave.
> Lowell, MA 01854

 

[Guest]

Archived from groups: microsoft.public.windowsxp.security_admin (More info?)

Not sure if this is helpful but you may wish to have a look

http://www.microsoft.com/technet/community/columns/cableguy/cg0204.mspx
Manually Configuring Windows Firewall in Windows XP Service Pack 2

http://support.microsoft.com/default.aspx?kbid=843090&product=windowsxpsp2
Description of the Windows Firewall feature in Windows XP Service Pack 2

Troubleshooting Windows Firewall settings in Windows XP Service Pack 2
http://support.microsoft.com/default.aspx?kbid=875357




Steve Athanas wrote:
> Hi, everyone:
>
> Does anyone know of a way to get Windows Firewall to allow access on
> all ports to a specified IP address or subnet? I ask because I can
> allow specific ports, but wildcards like "*" don't seem to work.
>
> Ideally, this would be done through group policy, but any means
> necessary would be a good start.
>
> Any thoughts out there?