1 Tags: BIOS Gigabyte Windows 7 Last response: December 15, 2010 2:53 PM in Windows 7 Share Anonymous a b $ Windows 7 December 15, 2010 7:53:55 AM Hello, How to update bios of gigabyte GA X58A UD3R rev1.0 More about : question tical2399 December 15, 2010 2:53:36 PM Quote:Hello, How to update bios of gigabyte GA X58A UD3R rev1.0 I have the version 1.6 and if the 1.0 board is the same then the process is this 1. go to this page where the 1.0 bios is http://www.gigabyte.us/products/product-page.aspx?pid=2... and download the bios you want 2. Unzip or unrar it and put the files on a flash drive (make sure flash driver is formatted to fat 16 or fat 32) 3. Restart computer 4. When the post screen comes up (white screen at the start up) hit the "end" button on you keyboard it will take you to the flash utility. 5. Use the up/down arrow keys to move to "update bios from drive". 6. The utility will ask you where your update file is located (hard drive, cd drive etc,) so find your flash drive in the list by using the up/down arrow keys and hit enter 7. Select the bios file you want to use (should only be one on there) and hit enter. It will ask you are you sure, just hit enter again. 8. Watch the status info while its updating and when its done just hit any key to go back to the main menu. That's about it. Hope that helps some. Can't find your answer ? Ask ! Publish Related resources Mobo automatically overvolts to 1 .367 v when loading stock values Forum Connect 3 wired devices to router with 1 port Forum Slower Performance due to Raid 1 ? Forum ASUS EAH4870 Dark Knight 1 Gb graphic issues Forum "Reboot and select Proper boot device" Forum [Solved] OS ?? Forum Hi Forum 0h Forum IE 32 bit in win 7 64 bit Forum 0h Forum Hi Forum Ph Forum Page_fault_in_nonpaged_area Forum Hi Forum More resources Read discussions in other Windows 7 categories Configuration Customization Drivers Security Laptops !