Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)
I need help on restoring a Ghost image that was backed up on
a set of CDs. First I backed up the first partition to 4 CD-Rs
....and
also the whole drive to 8 CD-Rs.
At first I was doing an integrity check and it ran into a problem at
the ending of the second of the 4 CD-Rs. I kept trying to reboot to
Windows but it wasn't working. Also, I don't know if this messed
anything up but it gave me the option of removing the Virtual Disk
Partition, and I did. Then it was asking where the command
interpreter was.
With both images--image of 4 CD-Rs and 8 CD-Rs--after putting in the
second CD-R it gives a Ghost compression error. I've been booting
with an MS-DOS disk that has CD-ROM driver support and then using a
Ghost disk.
On the second CD-R it had me back up the error to the floppy drive A
as a text file. The text file read as shown below. The computer has
Windows 98, with about a 10 Gig Hard Drive. Please, please advice as
this is a problem at work:
Disk Info :
remote.............0
drive..............1
sectors_used.......39086082
estimated_used.....30599257
pemax..............2
Version............760
# Ord Boot Id Ext First Num Last Used NTFS
0 0 80 55 No 00000063 15631182 15631245 07144356 No
1 1 0 55 No 15631245 23454900 39086145 23454900 No
Disk Info :
remote.............0
drive..............0
sectors_used.......39086145
estimated_used.....0
pemax..............2
Version............0
# Ord Boot Id Ext First Num Last Used NTFS
0 0 80 55 No 00000063 15631182 15631245 07144356 No
1 1 0 55 No 15631245 23454900 39086145 23454900 No
Drive 128 WDC WD200BB-60CVB0 WD-WMAC21888299
Int 13h
Total Sectors 16450560
Bytes per Sector 512
MB 8032
Cylinders 1024
Heads 255
Sectors per Track 63
Extended Int 13h
Total Sectors 39102210
Bytes per Sector 512
MB 19092
Cylinders 2434
Heads 255
Sectors per Track 63
IDE using PIO
Total Sectors 39102336
Bytes per Sector 512
MB 19092
Cylinders 16383
Heads 16
Sectors per Track 63
IDE using UDMA (Active)
Total Sectors 39102336
Bytes per Sector 512
MB 19092
Cylinders 16383
Heads 16
Sectors per Track 63
Remote Drives
AsyncIo : 0
Image Devices
Key A:
Path A:
Desc
Type Floppy
Key @CD-R1
Path @CD-R1
Desc LG CD-ROM CRD-8400B
Type CD
Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)
Your integrity check failed. Unless there is an optical imperfection (dirt,
scratch) on that second CD, that you would be able to remove, there is not
much you can do. Just create another set AND RUN INTEGRITY CHECK AGAIN. That
is especially important when writing directly to CD-Rs (your experience has
proven it).
What about the other set? Did you run integrity check on those too? You have
to. Otherwise it will not be possible to restore disk/partition from that
set. If you attempt to do that, you will end up with corrupted disk and
corrupted image on CDRs, without any good backup.
I hate this image strategy. It is slow, prone to CDR related errors, costly
and manual. Why not to image to the network share?
<netsurfer802@yahoo.com> wrote in message
news:40411b2d.0408071337.2cc93a5d@posting.google.com...
> I need help on restoring a Ghost image that was backed up on
> a set of CDs. First I backed up the first partition to 4 CD-Rs
> ...and
> also the whole drive to 8 CD-Rs.
>
> At first I was doing an integrity check and it ran into a problem at
> the ending of the second of the 4 CD-Rs. I kept trying to reboot to
> Windows but it wasn't working. Also, I don't know if this messed
> anything up but it gave me the option of removing the Virtual Disk
> Partition, and I did. Then it was asking where the command
> interpreter was.
>
> With both images--image of 4 CD-Rs and 8 CD-Rs--after putting in the
> second CD-R it gives a Ghost compression error. I've been booting
> with an MS-DOS disk that has CD-ROM driver support and then using a
> Ghost disk.
>
> On the second CD-R it had me back up the error to the floppy drive A
> as a text file. The text file read as shown below. The computer has
> Windows 98, with about a 10 Gig Hard Drive. Please, please advice as
> this is a problem at work:
>
> *********************************
> Date : Sat Aug 7 17:33:02 2004
> Error Number: (19230)
> Message: Compression overrun
> Version: 2003.775 (Aug 14 2002, Build=775)
> Command line arguments:
> Active Switches :
> Spanning
> AutoName
> CRC Ignore
> ProgMode : PROG_LOCAL
> PathName :
> \WINDOWS\APPLIC~1\IDENTI~1\{B65C8~1\MICROS~1\OUTLOO~1\SENTIT~1.DBX
> DumpFile : @CD-R1Ghost CD/DVD Image
> DumpPos : 566352221
> File64 buffersize : 0
> FlagImplode : 0
> FlagExplode : 2
>
> Operation Details :
> Total size.........14941
> MB copied..........762
> MB remaining.......14179
> Percent complete...5%
> Speed..............117MB/min
> Time elapsed.......6:29
> Time remaining.....2:00:31
>
> Program Call Stack
> Generic_Abort
> ghUnCompress
> BrRcvCloneFile
> BrMakeCloneDir
> BrMakeCloneDir
> BrMakeCloneDir
> BrMakeCloneDir
> BrMakeCloneDir
> BrMakeCloneDir
> BrMakeCloneDir
> BrSendCloneLocal
> CopyFatPartition
> ProcessFATPartition
> CopyPartition
> ProcessAllPartitions
> CopyAllPartitions
> CopyFileToDisk
> CopyMainline
> AttemptOperation
> sub_main
> main
>
> Call Stack
> 0x0023b4f7
> 0x0006b0af
> 0x0006a35c
> 0x0006a1d1
> 0x0006b92a
> 0x000a8b7a
> 0x00047d4f
> 0x0004a168
> 0x0004a077
> 0x0004a077
> 0x0004a077
> 0x0004a077
> 0x0004a077
> 0x0004a077
> 0x0004b01f
> 0x0004b113
> 0x0004ca39
> 0x0002d8e1
> 0x0002cfc9
> 0x0002ce03
> 0x0002c26b
> 0x000022cc
> 0x000023f3
> 0x00004426
> 0x0000370b
> 0x00248bf8
> End Call Stack
>
>
> Start heap available: 61538304
> Cur heap available: 34865152
> Total Memory: 65994752
>
> Conventional Memory
> Inital Conventional Memory Size = 498672
> Current Conventional Memory Size = 412656
> Allocated
> 1024 DpmiDjgpp.cpp:59
> 33504 ghost.cpp:911
> 528 IdeDmaServerPci.cpp:132
> 528 IdeDmaServerPci.cpp:132
> 32 DiskDriveAccessExInt13.cpp:107
> Free
> 16 MsdosFile.cpp:92
> 80 DiskDriveAccessExInt13.cpp:93
> 512 DiskDriveAccessInt13.cpp:177
> 32768 LfoDeviceCommand.cpp:80
>
> Fat details:
> SRC:
> FatType..........32
> first_sect.......63
> ClusterSize......4096
> clusters.........1950084
> root_next_avail..0
> data_next_avail..0
> dir_sector.......0
> root_sector......30504
> data_sector......30504
> FAT_sector.......0
> DST:
> FatType..........32
> first_sect.......63
> ClusterSize......4096
> clusters.........1950084
> root_next_avail..0
> data_next_avail..262808
> dir_sector.......1040328
> root_sector......30504
> data_sector......30504
> FAT_sector.......1019
>
> NTFS details:
> ----------------
>
> NTFS Global Flags:
> ----------------
> contiguousWrite=1 forceDiskClusterMapping=0
> inhibitCHKDSK=1 ignoreBadLog=0 ignoreCHKDSKBit=0
> enable_cache=0 xfrbuflen=0
> last_attr_type = 0
> ----------------
>
> Disk Info :
> remote.............0
> drive..............1
> sectors_used.......39086082
> estimated_used.....30599257
> pemax..............2
> Version............760
>
> # Ord Boot Id Ext First Num Last Used NTFS
> 0 0 80 55 No 00000063 15631182 15631245 07144356 No
> 1 1 0 55 No 15631245 23454900 39086145 23454900 No
>
> Disk Info :
> remote.............0
> drive..............0
> sectors_used.......39086145
> estimated_used.....0
> pemax..............2
> Version............0
>
> # Ord Boot Id Ext First Num Last Used NTFS
> 0 0 80 55 No 00000063 15631182 15631245 07144356 No
> 1 1 0 55 No 15631245 23454900 39086145 23454900 No
>
> Drive 128 WDC WD200BB-60CVB0 WD-WMAC21888299
>
> Int 13h
> Total Sectors 16450560
> Bytes per Sector 512
> MB 8032
> Cylinders 1024
> Heads 255
> Sectors per Track 63
>
> Extended Int 13h
> Total Sectors 39102210
> Bytes per Sector 512
> MB 19092
> Cylinders 2434
> Heads 255
> Sectors per Track 63
>
> IDE using PIO
> Total Sectors 39102336
> Bytes per Sector 512
> MB 19092
> Cylinders 16383
> Heads 16
> Sectors per Track 63
>
> IDE using UDMA (Active)
> Total Sectors 39102336
> Bytes per Sector 512
> MB 19092
> Cylinders 16383
> Heads 16
> Sectors per Track 63
>
> Remote Drives
> AsyncIo : 0
> Image Devices
>
> Key A:
> Path A:
> Desc
> Type Floppy
>
> Key @CD-R1
> Path @CD-R1
> Desc LG CD-ROM CRD-8400B
> Type CD
>
>
> *********************************
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.