USB 802.11g wireless adapter

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

I read some installation guides of this type of device. It appears to me
that some configuration and monitor software have to be installed before the
adapter is working correctly. The installation guides do not mention that
if I installed the adapter and it works correctly, I then move the adapter
to other notebook computer for use. Do I need to install the software again
on the new notebook computer or just plug it in and it works like the one to
configure it before? Your share of practice experience is highly
appreciated.

Thanks,

Ray

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Hi.
You have to install the drivers on every computer that you want it to work
with one time.'

If you unplug the Adapter and plug it again after a while the Adapter will
pick up the previously installed drivers.

Jack (MVP-Networking).





"Ray" <Ray282828@Yahoo.com.HK> wrote in message
news9lcJpSfEHA.3632@TK2MSFTNGP09.phx.gbl...
> I read some installation guides of this type of device. It appears to me
> that some configuration and monitor software have to be installed before
the
> adapter is working correctly. The installation guides do not mention that
> if I installed the adapter and it works correctly, I then move the adapter
> to other notebook computer for use. Do I need to install the software
again
> on the new notebook computer or just plug it in and it works like the one
to
> configure it before? Your share of practice experience is highly
> appreciated.
>
> Thanks,
>
> Ray
>
>

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

Edward,

Thank for your advice.

Ray

"Edward W. Thompson" <thomeduk1@btopenworld.com> wrote in message
news:eDZ5wETfEHA.140@TK2MSFTNGP12.phx.gbl...
> While I am certainly not an expert on the subject, surely if the installed
> OS on the machine supports the adaptor or for that matter any hardware,
that
> is the drivers are embeded in the OS, the adaptor/hardware will transfer
> without need to install drivers and the like to any machine with the same
> OS. It may not work, however, on a machine with another OS installed, say
> WINME, unless you install the necessary drivers. As far as configuration
is
> concerned, everytime you install the hardware on a different machine you
> will need to configure it to suit.
>
>
> "Ray" <Ray282828@Yahoo.com.HK> wrote in message
> news9lcJpSfEHA.3632@TK2MSFTNGP09.phx.gbl...
> > I read some installation guides of this type of device. It appears to
me
> > that some configuration and monitor software have to be installed before
> the
> > adapter is working correctly. The installation guides do not mention
that
> > if I installed the adapter and it works correctly, I then move the
adapter
> > to other notebook computer for use. Do I need to install the software
> again
> > on the new notebook computer or just plug it in and it works like the
one
> to
> > configure it before? Your share of practice experience is highly
> > appreciated.
> >
> > Thanks,
> >
> > Ray
> >
> >
>
>