Enable write cache on scsi disc drive

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

I've got four FUJITSU MAP3735NC 73 GB SCSI disc drives connected to an
LSI LOGIC 20320-R U320 scsi controller.

I want to enable the write cache on two of the discs.

How can I do that unter SuSE Linux 9.1, kernel 2.6.5-7.104-smp?

I found no posibility to enable the discs' cache in the bios of the
controller.

Thanks,
Christian


+++++++++++++ boot.msg ++++++++++++++++

<5>SCSI subsystem initialized
<6>Fusion MPT base driver 3.01.03
<6>Copyright (c) 1999-2004 LSI Logic Corporation
<6>mptbase: Initiating ioc0 bringup
<6>ioc0: 53C1030: Capabilities={Initiator} <6>Fusion MPT SCSI Host driver
3.01.03 <6>scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222,
IRQ=26
<5> Vendor: LSILOGIC Model: 1030 IM Rev: 1000
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>SCSI device sda: 71553024 512-byte hdwr sectors (36635 MB) <5>SCSI device
sda: drive cache: write through <6> sda: sda1 sda2 sda3 <5>Attached scsi
disk sda at scsi0, channel 0, id 0, lun 0
<5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
<5> Type: Direct-Access ANSI SCSI revision: 03
<5>SCSI device sdb: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
device sdb: drive cache: write through <6> sdb: sdb1 <5>Attached scsi disk
sdb at scsi0, channel 0, id 2, lun 0
<5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
<5> Type: Direct-Access ANSI SCSI revision: 03
<5>SCSI device sdc: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
device sdc: drive cache: write through <6> sdc: sdc1 <5>Attached scsi disk
sdc at scsi0, channel 0, id 3, lun 0
<5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
<5> Type: Direct-Access ANSI SCSI revision: 03
<5>SCSI device sdd: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
device sdd: drive cache: write back <6> sdd: sdd1 <5>Attached scsi disk sdd
at scsi0, channel 0, id 4, lun 0
<5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
<5> Type: Direct-Access ANSI SCSI revision: 03
<5>SCSI device sde: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
device sde: drive cache: write back <6> sde: sde1 <5>Attached scsi disk sde
at scsi0, channel 0, id 5, lun 0

 

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

Previously Christian Marx <marx@cxm.de> wrote:
> I've got four FUJITSU MAP3735NC 73 GB SCSI disc drives connected to an
> LSI LOGIC 20320-R U320 scsi controller.

> I want to enable the write cache on two of the discs.

> How can I do that unter SuSE Linux 9.1, kernel 2.6.5-7.104-smp?

> I found no posibility to enable the discs' cache in the bios of the
> controller.

Try scsi-config. In the sub-menu "Cache Control Page" there
is a button "Write cache enabled", that should do it. Also
note the big, red warning not to turn on write cache, unless
you know what you are doing. You might also want to read the
relevant section of the man-page. Don't forget to save the info
on the device, or it will be gone after the next reset. (Again
see man-page for details.)

Theoretically you can do all this also with "scsiinfo" on the
commandline, but the man-page of scsiinfo says "experts only" and
to use scsi-config instead.

In Debian scsi-config is in package "scsitools". I have no idea
were SuSE stores it.

Regards,
Arno



> Thanks,
> Christian


> +++++++++++++ boot.msg ++++++++++++++++

> <5>SCSI subsystem initialized
> <6>Fusion MPT base driver 3.01.03
> <6>Copyright (c) 1999-2004 LSI Logic Corporation
> <6>mptbase: Initiating ioc0 bringup
> <6>ioc0: 53C1030: Capabilities={Initiator} <6>Fusion MPT SCSI Host driver
> 3.01.03 <6>scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222,
> IRQ=26
> <5> Vendor: LSILOGIC Model: 1030 IM Rev: 1000
> <5> Type: Direct-Access ANSI SCSI revision: 02
> <5>SCSI device sda: 71553024 512-byte hdwr sectors (36635 MB) <5>SCSI device
> sda: drive cache: write through <6> sda: sda1 sda2 sda3 <5>Attached scsi
> disk sda at scsi0, channel 0, id 0, lun 0
> <5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
> <5> Type: Direct-Access ANSI SCSI revision: 03
> <5>SCSI device sdb: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
> device sdb: drive cache: write through <6> sdb: sdb1 <5>Attached scsi disk
> sdb at scsi0, channel 0, id 2, lun 0
> <5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
> <5> Type: Direct-Access ANSI SCSI revision: 03
> <5>SCSI device sdc: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
> device sdc: drive cache: write through <6> sdc: sdc1 <5>Attached scsi disk
> sdc at scsi0, channel 0, id 3, lun 0
> <5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
> <5> Type: Direct-Access ANSI SCSI revision: 03
> <5>SCSI device sdd: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
> device sdd: drive cache: write back <6> sdd: sdd1 <5>Attached scsi disk sdd
> at scsi0, channel 0, id 4, lun 0
> <5> Vendor: FUJITSU Model: MAP3735NC Rev: 0108
> <5> Type: Direct-Access ANSI SCSI revision: 03
> <5>SCSI device sde: 143571316 512-byte hdwr sectors (73509 MB) <5>SCSI
> device sde: drive cache: write back <6> sde: sde1 <5>Attached scsi disk sde
> at scsi0, channel 0, id 5, lun 0

--
For email address: lastname AT tik DOT ee DOT ethz DOT ch
GnuPG: ID:1E25338F FP:0C30 5782 9D93 F785 E79C 0296 797F 6B50 1E25 338F
"The more corrupt the state, the more numerous the laws" - Tacitus

 

[Guest]

Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)

Arno Wagner wrote:
> Previously Christian Marx <marx@cxm.de> wrote:
>
>>I've got four FUJITSU MAP3735NC 73 GB SCSI disc drives connected to an
>>LSI LOGIC 20320-R U320 scsi controller.
>
>
>>I want to enable the write cache on two of the discs.
>
>
>>How can I do that unter SuSE Linux 9.1, kernel 2.6.5-7.104-smp?
>
>
>>I found no posibility to enable the discs' cache in the bios of the
>>controller.
>
>
> Try scsi-config. In the sub-menu "Cache Control Page" there
> is a button "Write cache enabled", that should do it. Also
> note the big, red warning not to turn on write cache, unless
> you know what you are doing. You might also want to read the
> relevant section of the man-page. Don't forget to save the info
> on the device, or it will be gone after the next reset. (Again
> see man-page for details.)
>
> Theoretically you can do all this also with "scsiinfo" on the
> commandline, but the man-page of scsiinfo says "experts only" and
> to use scsi-config instead.
>
> In Debian scsi-config is in package "scsitools". I have no idea
> were SuSE stores it.
>

Well thanks for the detailed information. I found scsi-config in the
xscsi package. I didn't know that write caching is such a sensitive
topic when it comes to scsi disks, so I decided to disable it since I
run a software raid-5 on top of those disks.

Regards,
Christian