Archived from groups: comp.sys.ibm.pc.hardware.storage (
More info?)
Previously Ian Roberts <sorry@nospam.com> wrote:
> "Arno Wagner" <me@privacy.net> wrote in message
> news:2tomggF20lp44U2@uni-berlin.de...
>> Previously no_name <no@name.com> wrote:
> big snip....
>>Better to do SMART monitoring in the OS regularly.
>> This will not give you perfect reliability, but SMART can actually
>> diagnose some problems (depending on the concrete drive) before
>> you loose data.
>>
>> It is also a good idea to run a long SMART self-test once a month
>> or so to find sectors going bad in seldom-used areas of the disk.
>>
> Hi Arno
> This thread caught my eye.
> Just wondered how do we implement SMART monitoring in the OS? Is this
> something built into Windows XP or does it require a third party app?
Since I do not use Windows for anything except gaming, I can only offer
you the Linux-view. On Linux what you do it to run a monitoring
programm like "smartctl" periodically and look whether something
critical has changed. This can be done manually with, e.g., a
Perl-script that is run from a cron-job (periodic sheduler).
I run this every 5 minutes on my servers to log and do temperature
monitoring. There is also a related tool called "smartd", that
sends email when important fields (like reallocated_sector_count)
change.
Smartctl is also available for Wondows, as far as I understand.
I have no idea (and do not care) whether Windows has a periodic
execution facility. I also have no idea whether smartd was
ported to Windows.
Perl is available on Windows iw you want to roll something yourself.
I don't think that Windows has integrated SMART monitoring.
> Similarly, how do I run a long SMART self-test?
smartctl -t long <device>
under Linux (something similar under Windows I would guess).
Wait until finished, look into the log or check whether SMART values
have changed. Takes, e.g. about 80 minutes on a 200GB Maxtor.
smartctl -a <device>
will tell you in the header what the disk thinks its "Extended self
test time" is. If the disk has problems it may take longer.
This command also shows you all the values (e.g. for use from
Perl) and the last few self-test results.
Arno
--
For email address: lastname AT tik DOT ee DOT ethz DOT ch
GnuPG: ID:1E25338F FP:0C30 5782 9D93 F785 E79C 0296 797F 6B50 1E25 338F
"The more corrupt the state, the more numerous the laws" - Tacitus
Facebook
Twitter
Instagram