Tom's Hardware: Topic Video Capture - no sound
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions.
Sign up now! Its free!
Archived from groups: microsoft.public.windowsxp.video (More info?)
I saw some video capture cards (AIW ATI is one of those) require an external
cable - just for sound. The cable in question should come with the capture
card and intended to be hooked up with one end to your video capture card
and with the other into your sound card.
As far as I know AIW also allows TV capture. So if you didn't connect AIW
card with your sound card with that external cable then you won't get sound
on your TV recordings either.
So do you have those two cards connected with an external cable?
--
Regards, Aharon.
VIDEO: http://www.videoclassified.com/pres1/
E-Mail: advertiser@videoclassified.com
Phone: 416-418-5127
WEB: http://www.videoclassified.com/
"NEVEDED" <NEVEDED@discussions.microsoft.com> wrote in message
news
A9587C1-ECE3-418D-BA0E-A37E219B9043@microsoft.com...
> I have a Sharp VL-E685 8mm Viewcam and video capture is working on my
> All-In-Wonder Rage 128. I can capture video in both MovieMaker and with
the
> software provided (MGI VideoWave II) - although it can be no faster than
30
> frames.
> I have tried aux, line in, etc. but there is no sound.
> I am connected from the camcorder to a ATI 'block' that has a yellow,
white
> and red connector as well as a roundmini-DIN (I believe) connector. From
my
> camcorder the connector only has a yellow and white input (I didn't think
> there would be a problem as the yellow is video and white audio). I know
> this is an older program and card but it worked well on another computer -
> just no sound when I installed and tried to use it in Windows XP.
> Any ideas? Much appreciated.
> neveded@aol.com
Archived from groups: microsoft.public.windowsxp.video (More info?)
Click on the little silver speaker in the SysTray.
Click on Options, Properties, Recording.
Ensure Line In is NOT set to Mute.
--
Cari (MS-MVP Windows Client - Printing, Imaging & Hardware)
www.coribright.com
"NEVEDED" <NEVEDED@discussions.microsoft.com> wrote in message
newsA9587C1-ECE3-418D-BA0E-A37E219B9043@microsoft.com...
>I have a Sharp VL-E685 8mm Viewcam and video capture is working on my
> All-In-Wonder Rage 128. I can capture video in both MovieMaker and with
> the
> software provided (MGI VideoWave II) - although it can be no faster than
> 30
> frames.
> I have tried aux, line in, etc. but there is no sound.
> I am connected from the camcorder to a ATI 'block' that has a yellow,
> white
> and red connector as well as a roundmini-DIN (I believe) connector. From
> my
> camcorder the connector only has a yellow and white input (I didn't think
> there would be a problem as the yellow is video and white audio). I know
> this is an older program and card but it worked well on another computer -
> just no sound when I installed and tried to use it in Windows XP.
> Any ideas? Much appreciated.
> neveded@aol.com
>
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Sponsored links
Ad
They won a badge
Join us in greeting them
- 21:03 gt1209 won the Sophmore badge
- 01:00 nbk_redspy won the Freshman badge
- 01:00 wanderlustx2 won the Freshman badge
- 01:00 bdaonion won the Freshman badge
- 01:00 perzy won the Freshman badge
- 01:00 Stewysb119 won the Freshman badge
- 01:00 dubesinhower won the Freshman badge
- 01:00 dubesinhower won the Spy badge
- 01:00 DustenH won the Uniformed badge
- 01:00 bew1075k won the Uniformed badge