Archived from groups: microsoft.public.windowsxp.video (More info?)
I have Xp pro, and a Panasonic Palmcorder model PV-
DV201, and when I plug in, I get the little "Doo-dig", and
it says if found a 61883 device, but says the driver is
invalid. There is no driver for this from panasonic, so I
can't figure it out. I already checked the panasonic site.
I can't capture with movie maker, or any other software.
Any Suggestions?
e-mail me at - loderunnerpro@juno.com
Archived from groups: microsoft.public.windowsxp.video (More info?)
are you connecting with firewire? If so check network connections and
disable the firewire one if enabled.
Graham
--
Graham Hughes
MVP Digital Media
www.dvds2treasure.com www.simplydv.com "AG" <anonymous@discussions.microsoft.com> wrote in message
news:05a201c48be0$c4bc81c0$a401280a@phx.gbl...
> I have Xp pro, and a Panasonic Palmcorder model PV-
> DV201, and when I plug in, I get the little "Doo-dig", and
> it says if found a 61883 device, but says the driver is
> invalid. There is no driver for this from panasonic, so I
> can't figure it out. I already checked the panasonic site.
> I can't capture with movie maker, or any other software.
> Any Suggestions?
> e-mail me at - loderunnerpro@juno.com
Archived from groups: microsoft.public.windowsxp.video (More info?)
I disabled the firewire in the network connections, but I
still always get the same - "Driver is invalid" error...
AG
>-----Original Message-----
>are you connecting with firewire? If so check network
connections and
>disable the firewire one if enabled.
>Graham
>
>--
>Graham Hughes
>MVP Digital Media
>www.dvds2treasure.com
>www.simplydv.com
>"AG" <anonymous@discussions.microsoft.com> wrote in
message
>news:05a201c48be0$c4bc81c0$a401280a@phx.gbl...
>> I have Xp pro, and a Panasonic Palmcorder model PV-
>> DV201, and when I plug in, I get the little "Doo-dig",
and
>> it says if found a 61883 device, but says the driver is
>> invalid. There is no driver for this from panasonic, so
I
>> can't figure it out. I already checked the panasonic
site.
>> I can't capture with movie maker, or any other software.
>> Any Suggestions?
>> e-mail me at - loderunnerpro@juno.com
>
>
>.
>
Archived from groups: microsoft.public.windowsxp.video (More info?)
The firewire connection is it on-board or on a pci card? Try unistalling the
firewire port and reinstalling it.
Graham
--
Graham Hughes
MVP Digital Media
www.dvds2treasure.com www.simplydv.com "AG" <anonymous@discussions.microsoft.com> wrote in message
news:0a3e01c48c40$aaf49dd0$a401280a@phx.gbl...
> I disabled the firewire in the network connections, but I
> still always get the same - "Driver is invalid" error...
> AG
> >-----Original Message-----
> >are you connecting with firewire? If so check network
> connections and
> >disable the firewire one if enabled.
> >Graham
> >
> >--
> >Graham Hughes
> >MVP Digital Media
> >www.dvds2treasure.com
> >www.simplydv.com
> >"AG" <anonymous@discussions.microsoft.com> wrote in
> message
> >news:05a201c48be0$c4bc81c0$a401280a@phx.gbl...
> >> I have Xp pro, and a Panasonic Palmcorder model PV-
> >> DV201, and when I plug in, I get the little "Doo-dig",
> and
> >> it says if found a 61883 device, but says the driver is
> >> invalid. There is no driver for this from panasonic, so
> I
> >> can't figure it out. I already checked the panasonic
> site.
> >> I can't capture with movie maker, or any other software.
> >> Any Suggestions?
> >> e-mail me at - loderunnerpro@juno.com
> >
> >
> >.
> >
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.