Sony handycam trv66 error codes :-(

Archived from groups: rec.video.desktop (More info?)

Sounds like you need to get it serviced (ouch!)...taken from the Sony
KnowledgeBase

C:31 C:32 The camera has detected a serviceable issue.

1.. Turn off the camcorder.
2.. Remove the battery or disconnect the AC power adaptor for 60 seconds.
3.. Insert the battery or reconnect the AC adaptor.
4.. Turn on the camcorder.
5.. If the error message appears, service may be required

Cheers
Dee


"Mike Blanchard" <exibar@thelair.com> wrote in message
news:cc0872df.0404041424.440d06c3@posting.google.com...
> I have a CCD-TRV66 Sony handycam that just started getting a C:31:10
> error message. If I take the battery and power off of the camera, the
> code changed to C:31:22 when I play a tape, C:31:23 when I try to
> rewind a tape.
>
> Does anyone have a listing of exactly what those error codes mean?
> All Sony's web site says is to remove all power for at least 60
> seconds and try again. Not really useful if you ask me, but I guess
> it's like "reboot".
>
> Thanks all!
> Mike B

Archived from groups: rec.video.desktop (More info?)

Mike Blanchard wrote:

> I have a CCD-TRV66 Sony handycam that just started getting
> a C:31:10 error message. If I take the battery and power
> off of the camera, the code changed to C:31:22 when I play
> a tape, C:31:23 when I try to rewind a tape.
>
> Does anyone have a listing of exactly what those error
> codes mean?

I do not have a listing for CCD-TRV66, but I do have a listings
of a couple of other Sony models, and at least they list those
codes consistently as:

C:31:10 - "LOAD direction loading motor timeout - loading
does not complete within specified time" (there
is also another error code for "UNLOAD direction
loading motor timeout".)

C:32:22 - "T reel fault."

C:31:23 - "S reel fault."

There are no specific instructions for correcting these faults,
just the generic "Load the tape again and perform operations
from the beginning" and "Remove the battery or power cable,
connect and perform operations from the beginning."

Apparently, if you cannot resolve the problem by following
the generic instructions, you either need to figure out the
actual mechanical/electrical reason for the fault yourself,
or take it to the service center for repairs.

--
znark

Archived from groups: rec.video.desktop (More info?)

Hmmmm.... sounds like power isn't getting to the reels to turn the
tape perhaps. when I attept to watch a tape, after the camera has
zero power overnight, the first frame that is on the tape appears, but
it doesn't sound like the tape's moving. Then I get the C:31:22
error.

Looks like I'll pull it apart and see if the tape motor burned out
or something. Hopefully it's something simple like a wire came off.

Thanks for the help with the error codes, what you mentioned falls
into place with the the tape not moving I would think.

I appreciate the help :-)
Mike B



"Jukka Aho" <jukka.aho@iki.fi> wrote in message news:<iVecc.2024$Qn3.1085@reader1.news.jippii.net>...
> Mike Blanchard wrote:
>
> > I have a CCD-TRV66 Sony handycam that just started getting
> > a C:31:10 error message. If I take the battery and power
> > off of the camera, the code changed to C:31:22 when I play
> > a tape, C:31:23 when I try to rewind a tape.
> >
> > Does anyone have a listing of exactly what those error
> > codes mean?
>
> I do not have a listing for CCD-TRV66, but I do have a listings
> of a couple of other Sony models, and at least they list those
> codes consistently as:
>
> C:31:10 - "LOAD direction loading motor timeout - loading
> does not complete within specified time" (there
> is also another error code for "UNLOAD direction
> loading motor timeout".)
>
> C:32:22 - "T reel fault."
>
> C:31:23 - "S reel fault."
>
> There are no specific instructions for correcting these faults,
> just the generic "Load the tape again and perform operations
> from the beginning" and "Remove the battery or power cable,
> connect and perform operations from the beginning."
>
> Apparently, if you cannot resolve the problem by following
> the generic instructions, you either need to figure out the
> actual mechanical/electrical reason for the fault yourself,
> or take it to the service center for repairs.