Direct3D problems with fresh install of xp

Archived from groups: microsoft.public.windowsxp.video (More info?)

This one has me stumped,i had a new mother board and cpu installed,and of
course a fresh install of windows,did all my updates for windows,video,sound
etc,but am unable to play WoW says i dont have the proper drivers to access
Direct3D did the dxdiag and this is what is says.
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
Memory: 512MB RAM
Page File: 348MB used, 899MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. Direct3D functionality not
available. You should verify that the driver is a final version from the
hardware manufacturer.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: RADEON 9800 PRO
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4E48&SUBSYS_30021002&REV_00
Display Memory: n/a
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6512 (English)
DDI Version: unknown
Driver Attributes: Final Retail
Driver Date/Size: 1/19/2005 19:25:56, 223744 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 1/19/2005 19:25:37, 965632 bytes
Device Identifier: {D7B71EE2-0D08-11CF-C26A-0810A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4E48
SubSys ID: 0x30021002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available
i dont understand why it cant read or give me the memory for my vid card
radeon 9800 pro 128 tryed reinstalling the directx several times but it just
skips from start to finish and says it has been installed.
Any help would be most welcome.
1 answer Last reply
More about direct3d problems fresh install
  1. Archived from groups: microsoft.public.windowsxp.video (More info?)

    What video card is installed on your system and which version of video
    drivers did u install ?

    --
    Rehan
    www.rehanfx.org - get transitions and effects for Windows Movie Maker


    "Hanover" <Hanover@discussions.microsoft.com> wrote in message
    news:2175A0B5-22D9-493E-804F-68DA1C756E16@microsoft.com...
    > This one has me stumped,i had a new mother board and cpu installed,and of
    > course a fresh install of windows,did all my updates for
    > windows,video,sound
    > etc,but am unable to play WoW says i dont have the proper drivers to
    > access
    > Direct3D did the dxdiag and this is what is says.
    > Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs)
    > Memory: 512MB RAM
    > Page File: 348MB used, 899MB available
    > Windows Dir: C:\WINDOWS
    > DirectX Version: DirectX 9.0c (4.09.0000.0904)
    > DX Setup Parameters: Not found
    > DxDiag Version: 5.03.2600.2180 32bit Unicode
    >
    > ------------
    > DxDiag Notes
    > ------------
    > DirectX Files Tab: No problems found.
    > Display Tab 1: No problems found. Direct3D functionality not
    > available. You should verify that the driver is a final version from the
    > hardware manufacturer.
    > Sound Tab 1: No problems found.
    > Sound Tab 2: No problems found.
    > Music Tab: No problems found.
    > Input Tab: No problems found.
    > Network Tab: No problems found.
    >
    > --------------------
    > DirectX Debug Levels
    > --------------------
    > Direct3D: 0/4 (n/a)
    > DirectDraw: 0/4 (retail)
    > DirectInput: 0/5 (n/a)
    > DirectMusic: 0/5 (n/a)
    > DirectPlay: 0/9 (retail)
    > DirectSound: 0/5 (retail)
    > DirectShow: 0/6 (retail)
    >
    > ---------------
    > Display Devices
    > ---------------
    > Card name: RADEON 9800 PRO
    > Manufacturer: ATI Technologies Inc.
    > Chip type: RADEON 9800 PRO AGP (0x4E48)
    > DAC type: Internal DAC(400MHz)
    > Device Key: Enum\PCI\VEN_1002&DEV_4E48&SUBSYS_30021002&REV_00
    > Display Memory: n/a
    > Current Mode: 1024 x 768 (32 bit) (75Hz)
    > Monitor: Plug and Play Monitor
    > Monitor Max Res: 1600,1200
    > Driver Name: ati2dvag.dll
    > Driver Version: 6.14.0010.6512 (English)
    > DDI Version: unknown
    > Driver Attributes: Final Retail
    > Driver Date/Size: 1/19/2005 19:25:56, 223744 bytes
    > WHQL Logo'd: Yes
    > WHQL Date Stamp: n/a
    > VDD: n/a
    > Mini VDD: ati2mtag.sys
    > Mini VDD Date: 1/19/2005 19:25:37, 965632 bytes
    > Device Identifier: {D7B71EE2-0D08-11CF-C26A-0810A1C2CB35}
    > Vendor ID: 0x1002
    > Device ID: 0x4E48
    > SubSys ID: 0x30021002
    > Revision ID: 0x0000
    > Revision ID: 0x0000
    > Video Accel:
    > Deinterlace Caps: n/a
    > Registry: OK
    > DDraw Status: Not Available
    > D3D Status: Not Available
    > AGP Status: Not Available
    > i dont understand why it cant read or give me the memory for my vid card
    > radeon 9800 pro 128 tryed reinstalling the directx several times but it
    > just
    > skips from start to finish and says it has been installed.
    > Any help would be most welcome.
Ask a new question

Read More

Video Direct3D Windows XP