Archived from groups: microsoft.public.windowsxp.video (
More info?)
Often repairs can be prohibitively expensive, so it's going to be a case of
check it out and see, then make up your own mind. It cna be done, and will
most likely need an authorised agent of the manufacturer of the cam to do
it.
--
Graham Hughes
MVP Digital Media
Laird of Glencairn
www.dvds2treasure.com
www.simplydv.com
"Glenwood" <Glenwood@discussions.microsoft.com> wrote in message
news
FAFE518-9158-45AC-9658-C3C276FD1021@microsoft.com...
> Many thanks it turns out that you where correct it was the camera at fault
> and the firewire port on the camcorder has gone 'bad'. .is it worth
> getting it fixed can it be fixed, many thanks.
> Glenwood.
>
>
> "Cari (MS-MVP)" wrote:
>
> > It should install the driver for the camcorder as soon as it detects it.
Of
> > course it can't detect a device which isn't turned on.
> >
> > You might also ensure that you are running the camcorder offf A/C power.
> > Some refuse to let the PC take control of them (which is what happens)
if
> > they're running off their own battery.
> >
> > If you can, check the camcorder on aother PC. See if it's detected
there.
> > There have been cases where the firewire port on the camcorder has gone
> > 'bad'. And cables that don't connect.
> >
> > Also if you can, check the firewire port on the PC... this would involve
> > 'borrowing' an external drive (CD, DVD, hard drive) from a friend or
> > acquaintance and seeing if the PC will detect that drive.
> >
> > It just helps narrow down exactly where the problem lies.
> > --
> > Cari
> > (MS-MVP Printing & Imaging)
> >
> > "Glenwood" <Glenwood@discussions.microsoft.com> wrote in message
> > news:B21E7EAB-7905-4D62-BC53-410269B72B25@microsoft.com...
> > > "Cari (MS-MVP)" wrote:
> > >
> > >> Providing the Firewire card shows up correctly in Device Manager and
the
> > >> connection is good... after you connect the camcorder to the PC and
turn
> > >> it
> > >> on and in VCR mode you should hear a 'ding' connection sound... then
a
> > >> box
> > >> should launch asking what you wish to do... ie import the files into
your
> > >> editing program.
> > >> --
> > >> Cari
> > >> (MS-MVP Printing & Imaging)
> > >>
> > >> "Glenwood" <Glenwood@discussions.microsoft.com> wrote in message
> > >> news:98C35979-1061-4F99-A965-54B097C91F28@microsoft.com...
> > >> >I am having some trouble connecting my camera to my computer,
> > >> > I have a jvc mini Dv model GR-DVL 105 and using an on board fire
wire
> > >> > connection
> > >> > I have gone into the bios and it is all set up properly,
> > >> > Proseser is an AMD 3500+, 1G ram and using MGI videowave software
> > >> > Graphique card is nvidia geforce fx5700
> > >> >
> > >> > I have had it working in another machine
> > >> > But I can't remember if it had me on it or xp
> > >> >
> > >> >
> > >> Yes it is showing up in device manager but i do not have a box
showing
> > >> and no ding, i know what you mean, will it need a driver fore the
camera.
> > >> could it be the operating system i am using xp home
> > > as far as i know the cable is ok i have had it worcking on my old
machine
> > > but it now refuses to worck on that one as well and the only thing i
have
> > > changed is the opperating system.i did have me on it before and cant
> > > remember
> > > what system i was using the camera on
> > >
> > >
> > >>
> > >>
> > >>
> > >
> >
> >
> >
> >