Problems with IBM T40 + PRO/Wireless LAN 2100 3B

Archived from groups: microsoft.public.windows.networking.wireless (More info?)

For anyone else with the same issue - we updated the IOS on the 1200 APs to
the laterst version and the problem when away.
Al

"Al Blake" <al@removethistext.blakes.net> wrote in message
newsxNIbD3qEHA.3840@TK2MSFTNGP10.phx.gbl...
> We have 250+ IBM T40 with the IBM PRO/Wireless LAN 2100 3B 802.11b card
> installed. Laptops run WXPSP2.
> Driver is 1.2.3.14 which is the latest we can find.
>
> We are using Cisco 1200 Aps with PEAP-TLS authentication.
>
> When the machines startup they connect perfectly initially....but the ping
> times are all over the place to a wired server:
>
> eg: 113,19,72,28,255,23 ms
> when running a Toshiba satellite 1800 with its 802.11.b card over the same
> setup the pings are uniformly 2ms.
>
> then...after a *random* time (usually about 5 minutes) we lose the
wireless
> connection on the IBM altogether....and authenticationm starts
> again...sometimes it works and sometimes it doesnt.
>
> We have a couple of T40s with the 802.11a/b/g card installed and they seem
> to be rosk steady on the WLAN, despite having a later driver. So it seems
as
> though there is an issue with the
> 2100 3B + XPSP2 + PEAP-TLS ????
> Anyone else expereincing similar problems?
>
> Anyone know of a newer driver or other fixes we can try? We *really* dont
> wan to have to buy 250+ new cards to get these T40s to connect with
> stbility.
> Al Blake, Australia
>
>
>