howto load extra drivers onto win98 startup disk

[Junkcollector]

I have a pcmcia adaptec 1460b card. The win98 startup disk will not recognize my scsi cd-rom. I really need help trying to install the drivers so I can install win98 on my laptop. Right now the hard drive is blank and I really need the help

 

[Lowlypawn]

Do you have another Cdrom? Just to get windows loaded and an internet connection. Then you could just download the driver. Also if u partition the drive you can store a copy of windows and all the drivers you need on it and never have this problem again. If you have the extra room that is.

<font color=green>I may go to hell but at least I won't get lonely</font color=green>

 

[tartarhus]

He's right you will need to do a remote installation. You need to either connect to another computer via ethernet or parallel port using dos. Then you will need to copy the win9x or win98 folder to your c drive and execute the setup.exe file.

to copy in dos enter:

c:
format c: /s (not necessary but recommended)
mkdir win98

change to the remote win98 directory and type:
copy *.* c:\win98

then execute the setup.exe in the win98 folder on your c: drive.

-- Chaos is the better order.