Archived from groups: microsoft.public.windowsxp.work_remotely (More info?)
My remote desktop connection works fine when I connect with a Remote Desktop client. However when I connect with a web based connection I get the following error -- this happened out of the blue after successful use for over 2 years.
Any ideas??? ...
error as follows:
timed out. Please try connecting to the remote computer again." const L_DisconnectIdleTimeout_ErrorMessage = "The remote session was ended because the idle timeout limit was reached. This limit is set by the server administrator or by network policies." const L_DisconnectLogonTimeout_ErrorMessage ="The remote session ended because the total logon time limit was reached. This limit is set by the server administrator or by network policies." const L_ProtocolErrWITHCODE_ErrorMessage = "Client disconnected due to internal protocol error: " const L_LicensingTimeout_ErrorMessage = "A licensing error occurred while the client was attempting to connect (Licensing timed out).Please try connecting to the remote computer again." const L_LicensingNegotFailed_ErrorMessage = "The remote computer disconnected the session because of an error in the licensing protocol.Please try connecting to the remote computer again or contact your server administrator." const L_DisconnectRemoteByServerTool_ErrorMessage = "The remote session to the remote computer was ended by means of an administration tool.Your administrator might have ended your connection." const L_LogoffRemoteByServer_ErrorMessage = "The remote session was disconnected because your session was logged off at the remote computer.Your administrator or another user might have ended your connection." const L_DisconnectByOtherConnection_ErrorMessage = "The remote session was disconnected because another user has connected to the session." const L_ConnectionBroken_ErrorMessage = "The connection to the remote computer was broken. This may have been caused by a network error.Please try connecting to the remote computer again." const L_ServerOutOfMemory_ErrorMessage = "The connection was disconnected because the remote computer is low on memory." const L_LicenseInternal_ErrorMessage = "The remote session was disconnected because there was an internal error in the remote computer's licensing protocol." const L_NoLicenseServer_ErrorMessage = "The remote session was disconnected because there are no Terminal Server License Servers available to provide a license.Please contact the server administrator." const L_NoLicense_ErrorMessage = "The remote session was disconnected because there are no Terminal Server client access licenses available for this computer.Please contact the server administrator." const L_LicenseBadClientMsg_ErrorMessage = "The remote session was disconnected because the remote computer received an invalid licensing message from this computer." const L_LicenseHwidDoesntMatch_ErrorMessage = "The remote session was disconnected because the Terminal Server client access license stored on this computer has been modified." const L_BadClientLicense_ErrorMessage = "The remote session was disconnected because the Terminal Server client access license stored on this computer is in an invalid format." const L_LicenseCantFinishProtocol_ErrorMessage = "The remote session was disconnected because there were network problems during the licensing protocol.Please try connecting to the remote computer again." const L_LicenseClientEndedProtocol_ErrorMessage = "The remote session was disconnected because the client prematurely ended the licensing protocol." const L_LicenseBadClientEncryption_ErrorMessage = "The remote session was disconnected because a licensing message was incorrectly encrypted." const L_CantUpgradeLicense_ErrorMessage = "The remote session was disconnected because the local computer's client access license could not be upgraded or renewed.Please contact the server administrator." const L_LicenseNoRemoteConnections_ErrorMessage = "The remote session was disconnected because the remote computer is not licensed to accept remote connections.Please contact the server administrator." const L_DecompressionFailed_ErrorMessage = "The remote session was disconnected because of a decompression failure at the client side. Please try connecting to the remote computer again." const L_ServerDeniedConnection_ErrorMessage ="The client could not establish a connection to the remote computer.The most likely causes for this error are:1) Remote connections might not be enabled at the remote computer.2) The maximum number of connections was exceeded at the remote computer.3) A network error occurred while establishing the connection." sub window_onload() if not LCase(Navigator.CpuClass) = "x86" then msgbox L_PlatformCheck_ErrorMessage end if if not autoConnect() then Document.all.editServer.Focus end if end sub function autoConnect() Dim sServer Dim iFS, iAutoConnect sServer = getQS ("Server") iAutoConnect = getQS ("AutoConnect") iFS = getQS ("FS") if NOT IsNumeric ( iFS ) then iFS = 0 else iFS = CInt ( iFS ) end if if iAutoConnect <> 1 then autoConnect = false exit function else if iFS < 0 or iFS >= Document.all.comboResolution.options.length then iFS = 0 end if if IsNull ( sServer ) or sServer = "" then sServer = window.location.hostname end if Document.all.comboResolution.selectedIndex = iFS Document.all.Server.value = sServer btnConnect () autoConnect = true end if end function function getQS ( sKey ) Dim iKeyPos, iDelimPos, iEndPos Dim sURL, sRetVal iKeyPos = iDelimPos = iEndPos = 0 sURL = window.location.href if sKey = "" Or Len(sKey) < 1 then getQS = "" exit function end if iKeyPos = InStr ( 1, sURL, sKey ) if iKeyPos = 0 then sRetVal = "" exit function end if iDelimPos = InStr ( iKeyPos, sURL, "=" ) iEndPos = InStr ( iDelimPos, sURL, "&" ) if iEndPos = 0 then sRetVal = Mid ( sURL, iDelimPos + 1 ) else sRetVal = Mid ( sURL, iDelimPos + 1, iEndPos - iDelimPos - 1 ) end if getQS = sRetVal end function sub checkClick if Document.all.Check1.Checked then Document.all.tableLogonInfo.style.display = "" Document.all.editUserName.Disabled = false Document.all.editDomain.Disabled = false else Document.all.tableLogonInfo.style.display = "none" Document.all.editUserName.Disabled = true Document.all.editDomain.Disabled = true end if end sub sub OnControlLoad set Control = Document.getElementById("MsRdpClient") if Not Control is Nothing then if Control.readyState = 4 then Document.all.connectButton.disabled = FALSE end if end if end sub sub BtnConnect Dim serverName 'server if not Document.all.Server.value = "" then serverName = Document.all.Server.value else serverName = Document.location.hostname end if serverName = trim(serverName) MsRdpClient.server = serverName 'serverName name text Document.all.srvNameField.innerHtml = serverName 'Username/Domain if Document.all.CheckBoxAutoLogon.checked then MsRdpClient.UserName = Document.all.UserName.Value MsRdpClient.Domain = Document.all.Domain.Value end if 'Resolution MsRdpClient.FullScreen = FALSE select case document.all.comboResolution.value case "1" MsRdpClient.FullScreen = TRUE resWidth = screen.width resHeight = screen.height case "2" resWidth = "640" resHeight = "480" case "3" resWidth = "800" resHeight = "600" case "4" resWidth = "1024" resHeight = "768" case "5" resWidth = "1280" resHeight = "1024" case "6" resWidth = "1600" resHeight = "1200" end select MsRdpClient.DesktopWidth = resWidth MsRdpClient.DesktopHeight = resHeight MsRdpClient.Width = resWidth MsRdpClient.Height = resHeight 'Device redirection options MsRdpClient.AdvancedSettings2.RedirectDrives = FALSE MsRdpClient.AdvancedSettings2.RedirectPrinters = TRUE MsRdpClient.AdvancedSettings2.RedirectPorts = FALSE MsRdpClient.AdvancedSettings2.RedirectSmartCards = FALSE 'FullScreen title MsRdpClient.FullScreenTitle = L_FullScreenTitle_Text & "(" & serverName & ")" 'Display connect region Document.all.loginArea.style.display = "none" Document.all.connectArea.style.display = "block" 'Connect MsRdpClient.Connect end sub -->
Remote Desktop Web Connection
Type the name of the remote computer you want to use, select the screen size for your connection, and then click Connect.
When the connection page opens, you can add it to your Favorites for easy connection to the same computer.
Server:
Size:
Full-screen 640 by 480 800 by 600 1024 by 768 1280 by 1024 1600 by 1200
Send logon information for this connection
My remote desktop connection works fine when I connect with a Remote Desktop client. However when I connect with a web based connection I get the following error -- this happened out of the blue after successful use for over 2 years.
Any ideas??? ...
error as follows:
timed out. Please try connecting to the remote computer again." const L_DisconnectIdleTimeout_ErrorMessage = "The remote session was ended because the idle timeout limit was reached. This limit is set by the server administrator or by network policies." const L_DisconnectLogonTimeout_ErrorMessage ="The remote session ended because the total logon time limit was reached. This limit is set by the server administrator or by network policies." const L_ProtocolErrWITHCODE_ErrorMessage = "Client disconnected due to internal protocol error: " const L_LicensingTimeout_ErrorMessage = "A licensing error occurred while the client was attempting to connect (Licensing timed out).Please try connecting to the remote computer again." const L_LicensingNegotFailed_ErrorMessage = "The remote computer disconnected the session because of an error in the licensing protocol.Please try connecting to the remote computer again or contact your server administrator." const L_DisconnectRemoteByServerTool_ErrorMessage = "The remote session to the remote computer was ended by means of an administration tool.Your administrator might have ended your connection." const L_LogoffRemoteByServer_ErrorMessage = "The remote session was disconnected because your session was logged off at the remote computer.Your administrator or another user might have ended your connection." const L_DisconnectByOtherConnection_ErrorMessage = "The remote session was disconnected because another user has connected to the session." const L_ConnectionBroken_ErrorMessage = "The connection to the remote computer was broken. This may have been caused by a network error.Please try connecting to the remote computer again." const L_ServerOutOfMemory_ErrorMessage = "The connection was disconnected because the remote computer is low on memory." const L_LicenseInternal_ErrorMessage = "The remote session was disconnected because there was an internal error in the remote computer's licensing protocol." const L_NoLicenseServer_ErrorMessage = "The remote session was disconnected because there are no Terminal Server License Servers available to provide a license.Please contact the server administrator." const L_NoLicense_ErrorMessage = "The remote session was disconnected because there are no Terminal Server client access licenses available for this computer.Please contact the server administrator." const L_LicenseBadClientMsg_ErrorMessage = "The remote session was disconnected because the remote computer received an invalid licensing message from this computer." const L_LicenseHwidDoesntMatch_ErrorMessage = "The remote session was disconnected because the Terminal Server client access license stored on this computer has been modified." const L_BadClientLicense_ErrorMessage = "The remote session was disconnected because the Terminal Server client access license stored on this computer is in an invalid format." const L_LicenseCantFinishProtocol_ErrorMessage = "The remote session was disconnected because there were network problems during the licensing protocol.Please try connecting to the remote computer again." const L_LicenseClientEndedProtocol_ErrorMessage = "The remote session was disconnected because the client prematurely ended the licensing protocol." const L_LicenseBadClientEncryption_ErrorMessage = "The remote session was disconnected because a licensing message was incorrectly encrypted." const L_CantUpgradeLicense_ErrorMessage = "The remote session was disconnected because the local computer's client access license could not be upgraded or renewed.Please contact the server administrator." const L_LicenseNoRemoteConnections_ErrorMessage = "The remote session was disconnected because the remote computer is not licensed to accept remote connections.Please contact the server administrator." const L_DecompressionFailed_ErrorMessage = "The remote session was disconnected because of a decompression failure at the client side. Please try connecting to the remote computer again." const L_ServerDeniedConnection_ErrorMessage ="The client could not establish a connection to the remote computer.The most likely causes for this error are:1) Remote connections might not be enabled at the remote computer.2) The maximum number of connections was exceeded at the remote computer.3) A network error occurred while establishing the connection." sub window_onload() if not LCase(Navigator.CpuClass) = "x86" then msgbox L_PlatformCheck_ErrorMessage end if if not autoConnect() then Document.all.editServer.Focus end if end sub function autoConnect() Dim sServer Dim iFS, iAutoConnect sServer = getQS ("Server") iAutoConnect = getQS ("AutoConnect") iFS = getQS ("FS") if NOT IsNumeric ( iFS ) then iFS = 0 else iFS = CInt ( iFS ) end if if iAutoConnect <> 1 then autoConnect = false exit function else if iFS < 0 or iFS >= Document.all.comboResolution.options.length then iFS = 0 end if if IsNull ( sServer ) or sServer = "" then sServer = window.location.hostname end if Document.all.comboResolution.selectedIndex = iFS Document.all.Server.value = sServer btnConnect () autoConnect = true end if end function function getQS ( sKey ) Dim iKeyPos, iDelimPos, iEndPos Dim sURL, sRetVal iKeyPos = iDelimPos = iEndPos = 0 sURL = window.location.href if sKey = "" Or Len(sKey) < 1 then getQS = "" exit function end if iKeyPos = InStr ( 1, sURL, sKey ) if iKeyPos = 0 then sRetVal = "" exit function end if iDelimPos = InStr ( iKeyPos, sURL, "=" ) iEndPos = InStr ( iDelimPos, sURL, "&" ) if iEndPos = 0 then sRetVal = Mid ( sURL, iDelimPos + 1 ) else sRetVal = Mid ( sURL, iDelimPos + 1, iEndPos - iDelimPos - 1 ) end if getQS = sRetVal end function sub checkClick if Document.all.Check1.Checked then Document.all.tableLogonInfo.style.display = "" Document.all.editUserName.Disabled = false Document.all.editDomain.Disabled = false else Document.all.tableLogonInfo.style.display = "none" Document.all.editUserName.Disabled = true Document.all.editDomain.Disabled = true end if end sub sub OnControlLoad set Control = Document.getElementById("MsRdpClient") if Not Control is Nothing then if Control.readyState = 4 then Document.all.connectButton.disabled = FALSE end if end if end sub sub BtnConnect Dim serverName 'server if not Document.all.Server.value = "" then serverName = Document.all.Server.value else serverName = Document.location.hostname end if serverName = trim(serverName) MsRdpClient.server = serverName 'serverName name text Document.all.srvNameField.innerHtml = serverName 'Username/Domain if Document.all.CheckBoxAutoLogon.checked then MsRdpClient.UserName = Document.all.UserName.Value MsRdpClient.Domain = Document.all.Domain.Value end if 'Resolution MsRdpClient.FullScreen = FALSE select case document.all.comboResolution.value case "1" MsRdpClient.FullScreen = TRUE resWidth = screen.width resHeight = screen.height case "2" resWidth = "640" resHeight = "480" case "3" resWidth = "800" resHeight = "600" case "4" resWidth = "1024" resHeight = "768" case "5" resWidth = "1280" resHeight = "1024" case "6" resWidth = "1600" resHeight = "1200" end select MsRdpClient.DesktopWidth = resWidth MsRdpClient.DesktopHeight = resHeight MsRdpClient.Width = resWidth MsRdpClient.Height = resHeight 'Device redirection options MsRdpClient.AdvancedSettings2.RedirectDrives = FALSE MsRdpClient.AdvancedSettings2.RedirectPrinters = TRUE MsRdpClient.AdvancedSettings2.RedirectPorts = FALSE MsRdpClient.AdvancedSettings2.RedirectSmartCards = FALSE 'FullScreen title MsRdpClient.FullScreenTitle = L_FullScreenTitle_Text & "(" & serverName & ")" 'Display connect region Document.all.loginArea.style.display = "none" Document.all.connectArea.style.display = "block" 'Connect MsRdpClient.Connect end sub -->
Remote Desktop Web Connection
Type the name of the remote computer you want to use, select the screen size for your connection, and then click Connect.
When the connection page opens, you can add it to your Favorites for easy connection to the same computer.
Server:
Size:
Full-screen 640 by 480 800 by 600 1024 by 768 1280 by 1024 1600 by 1200
Send logon information for this connection
ort/tsweb I then got a clean page without all of the errors! However when I tried to connect "full screen" I got an error on page error in the bottom left corner of my browser. However if I connected at anyhting less than "full screen" it worked like a charm.
Facebook
Twitter
Instagram