Virtualdub Filter order.....

[Guest]

Archived from groups: rec.video.desktop (More info?)

I am currently running my filters in this order and was hoping for
some feedback on the correct order.

1. Flaxen VHS filter (default settings)
2. Smart Smoother HQ 2.11 (default settings)
3. NRS by Antonio Foronna (only temporal smoother enabled)

I also have these filters but havnt experimented with them much since
Im not all the familiar with them yet. And I dont really know what the
differences are. Dynamic noise reduction 2.1 by Steven Don and 2d
cleaner optimized by Jim Casaburi.

If anyone can recommend a better combination or order for me to run
these filters in that would be really appreciated.

thanks...Jeremy

 

[Guest]

Archived from groups: rec.video.desktop (More info?)

Goodner79 wrote:
> I am currently running my filters in this order and was hoping for
> some feedback on the correct order.
>
> 1. Flaxen VHS filter (default settings)
> 2. Smart Smoother HQ 2.11 (default settings)
> 3. NRS by Antonio Foronna (only temporal smoother enabled)

As long as your input isn't interlaced, then that order should work fine.

--
-WD

 

[Guest]

Archived from groups: rec.video.desktop (More info?)

Will Dormann <wdormann@yahoo.com.invalid> wrote in message news:<bPmdnVs4ELgQTizcRVn-3Q@comcast.com>...
> Goodner79 wrote:
> > I am currently running my filters in this order and was hoping for
> > some feedback on the correct order.
> >
> > 1. Flaxen VHS filter (default settings)
> > 2. Smart Smoother HQ 2.11 (default settings)
> > 3. NRS by Antonio Foronna (only temporal smoother enabled)
>
> As long as your input isn't interlaced, then that order should work fine.

My input is a VCR tape using composit input from FlyVideo3000 card?? I
think that is interlaced isnt it?

 

[Guest]

Archived from groups: rec.video.desktop (More info?)

Goodner79 wrote:
> My input is a VCR tape using composit input from FlyVideo3000 card?? I
> think that is interlaced isnt it?

You tell me.
If you are capturing in an interlaced format, I wouldn't recommend using
any filters that operate in a 2D manner within a frame.

Best bet would be to surround such filters with an "unfold" deinterlace
before and "fold" interlace. For example, my settings for processing
video for DVD output is:

Temporal Cleaner
Deinterlace (unfold)
Smart Smoother HQ
Deinterlace (fold)




--
-WD

 

[Guest]

Archived from groups: rec.video.desktop (More info?)

Will Dormann <wdormann@yahoo.com.invalid> Sat, 04 Dec 2004 10:11:52 -
0500 wrote ...

>>
>> 1. Flaxen VHS filter (default settings)
>> 2. Smart Smoother HQ 2.11 (default settings)
>> 3. NRS by Antonio Foronna (only temporal smoother enabled)
>
>As long as your input isn't interlaced, then that order should work fine.
>
>
Should not spatial smoothers (as SS HQ,do not know Flaxen)
lay behind temporal smoothers ?

--
"Libor the Wanderer" <poutnikqdel@atthislas.cz>

Any supposed offense is because of bad english or idea formulation
and was not intended in any way.

ForPrivateResponseRemoveDelAndThisFromAboveAddress.