RAID question

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Have a mirror RAID setup but not sure if its working correctly. Its the
onboard RAID that comes with the Asus A7N8X mobo. Its not my bootable drive
( which is a normal IDE drive ) but its where I want to save data that I
want to keep ( thats why its mirrored ). When I boot I see the RAID showing
a mirror striped set but when I get into WinXP it only shows the one SATA
drive. I installed the SATA Raid utility that came with the motherboard and
sent myself the configuration information and it shows as follows :


"SATARaid Configuration Information. 04-April-2004 22:34.30
SATALink Version 1, 0, 0, 11


Computer Information -
Name A7N8X
Microsoft Windows XP 5.1
Service Pack 1


NO SII ADAPTERS FOUND!!!"


Now it looks like the mirror RAID is not working . I can see nothing when I
go into disk management ( well I can see the IDE, the one SATA drive and
CDROM ) so how do I know if my data is been protected by been copied to the
other Sata drive?

btw: both sata drives used for the raid are the same Maxtor 120gig drives

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

No , it only shows the size of one of the drives. Just rebooted so
I could enter the RAID Configuration Utility and it shows as
Set0 Sil Mirrored Set
and both drives are listed there but when it finally boots into WinXP
I cant find anything that shows that its working and that last line
in the Sata Utility installed in WinXP shows
NO SII ADAPTERS FOUND

Now that has me worried thats its not working. Should you be able to see
both drives in a mirrored RAID set under Win XP ?


"Kawipoo" <xxx@xxx.com> wrote in message
news:eWJcaXpGEHA.2308@tk2msftngp13.phx.gbl...
> It sound like it is set up for raid 0 which is striped across 2 disks.
> The 2 disks will appear as one. You need raid 1 if you are mirroring.
Does
> the SATA disk you see have a total capacity which equals both SATA
drives?
> If so this is probably the case.
> "Will Sutton" <sutton@swiftdsl.com.au> wrote in message
> news:c4q2hn$2krvke$1@ID-202516.news.uni-berlin.de...
> > Have a mirror RAID setup but not sure if its working correctly. Its the
> > onboard RAID that comes with the Asus A7N8X mobo. Its not my bootable
> drive
> > ( which is a normal IDE drive ) but its where I want to save data that I
> > want to keep ( thats why its mirrored ). When I boot I see the RAID
> showing
> > a mirror striped set but when I get into WinXP it only shows the one
SATA
> > drive. I installed the SATA Raid utility that came with the motherboard
> and
> > sent myself the configuration information and it shows as follows :
> >
> >
> > "SATARaid Configuration Information. 04-April-2004 22:34.30
> > SATALink Version 1, 0, 0, 11
> >
> >
> > Computer Information -
> > Name A7N8X
> > Microsoft Windows XP 5.1
> > Service Pack 1
> >
> >
> > NO SII ADAPTERS FOUND!!!"
> >
> >
> > Now it looks like the mirror RAID is not working . I can see nothing
when
> I
> > go into disk management ( well I can see the IDE, the one SATA drive and
> > CDROM ) so how do I know if my data is been protected by been copied to
> the
> > other Sata drive?
> >
> > btw: both sata drives used for the raid are the same Maxtor 120gig
drives
> >
> >
> >
>
>

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

If mirror raid the o/s will see only the one disk
If the raid has failed you will get a warning on reboot.
The raid utility was this the SataRaid GUI utility? - mine functions fine,
though I must admit I used the GUI utility downloaded from the Silicon Image
site.

"Will Sutton" <sutton@swiftdsl.com.au> wrote in message
news:c4q69u$2jf382$1@ID-202516.news.uni-berlin.de...
> Sorry for the confusion. I just realised I used the wrong jargon when I
used
> the word
> stripe but I was going from my memory instead of rebooting and writing
down
> the correct
> details. Anyway, removed the mirror set and both drives then showed under
XP
> and both
> had the same data on them so them so the mirror RAID was working but for
> some strange
> reason the utility installed under WinXP wouldn't work correctly ( ie.
show
> the correct
> details )
>
> anyone have a utility for monitoring the mirror RAID under WinXP ?
>
> btw: thx Kawipoo
>
>
> "Kawipoo" <xxx@xxx.com> wrote in message
> news:eWJcaXpGEHA.2308@tk2msftngp13.phx.gbl...
> > It sound like it is set up for raid 0 which is striped across 2 disks.
> > The 2 disks will appear as one. You need raid 1 if you are mirroring.
> Does
> > the SATA disk you see have a total capacity which equals both SATA
> drives?
> > If so this is probably the case.
> > "Will Sutton" <sutton@swiftdsl.com.au> wrote in message
> > news:c4q2hn$2krvke$1@ID-202516.news.uni-berlin.de...
> > > Have a mirror RAID setup but not sure if its working correctly. Its
the
> > > onboard RAID that comes with the Asus A7N8X mobo. Its not my bootable
> > drive
> > > ( which is a normal IDE drive ) but its where I want to save data that
I
> > > want to keep ( thats why its mirrored ). When I boot I see the RAID
> > showing
> > > a mirror striped set but when I get into WinXP it only shows the one
> SATA
> > > drive. I installed the SATA Raid utility that came with the
motherboard
> > and
> > > sent myself the configuration information and it shows as follows :
> > >
> > >
> > > "SATARaid Configuration Information. 04-April-2004 22:34.30
> > > SATALink Version 1, 0, 0, 11
> > >
> > >
> > > Computer Information -
> > > Name A7N8X
> > > Microsoft Windows XP 5.1
> > > Service Pack 1
> > >
> > >
> > > NO SII ADAPTERS FOUND!!!"
> > >
> > >
> > > Now it looks like the mirror RAID is not working . I can see nothing
> when
> > I
> > > go into disk management ( well I can see the IDE, the one SATA drive
and
> > > CDROM ) so how do I know if my data is been protected by been copied
to
> > the
> > > other Sata drive?
> > >
> > > btw: both sata drives used for the raid are the same Maxtor 120gig
> drives
> > >
> > >
> > >
> >
> >
>
>

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I'm using Silicon Image 3.112
GUI is 1.13
Both frm Silicon Image site, works OK for me

"Will Sutton" <sutton@swiftdsl.com.au> wrote in message
news:c4r1ji$2jl84c$1@ID-202516.news.uni-berlin.de...
>
> "DL" <dl@spoofmail.com> wrote in message
> newsvXctQqGEHA.2084@TK2MSFTNGP10.phx.gbl...
> > If mirror raid the o/s will see only the one disk
> > If the raid has failed you will get a warning on reboot.
> > The raid utility was this the SataRaid GUI utility? - mine functions
fine,
> > though I must admit I used the GUI utility downloaded from the Silicon
> Image
> > site.
>
> SATALink Version 1, 0, 0, 11 is the version from Silicon Image that I have
>
>
>