137 gb barrier and fresh install of XP Pro

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I installed on this system a fresh install of XP, did all the updates and got everything up to snuff. My HDD was shown at 137gb and I saw the unpartitioned 23gb. I can partition it and use it as another drive but that's not what I want. I want XP to recognize it as 160gb the first time I do a fresh install so that I only have one hard drive. How do I go about doing this? Getting SP1 installed is useless if it gets formatted during XP setup, so what's the point? I've tried doing a repair and that didn't work either.

Basically, I want all 160gb on C drive. I have an Abit IC7-G mobo.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Hello

See links below (good source of info)


Why can I only see 127 to 137 GBytes of my 160 GB drive in Windows XP
http://www.seagate.com/support/kb/disc/faq/137_winxp.html

Alvin


Lord Odin wrote:

> I installed on this system a fresh install of XP, did all the updates and got everything up to snuff. My HDD was shown at 137gb and I saw the unpartitioned 23gb. I can partition it and use it as another drive but that's not what I want. I want XP to recognize it as 160gb the first time I do a fresh install so that I only have one hard drive. How do I go about doing this? Getting SP1 installed is useless if it gets formatted during XP setup, so what's the point? I've tried doing a repair and that didn't work either.
>
> Basically, I want all 160gb on C drive. I have an Abit IC7-G mobo.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

So you're saying the ONLY solution is to create a 2nd partition, right?

----- Alvin Brown wrote: -----

Hello

See links below (good source of info)


Why can I only see 127 to 137 GBytes of my 160 GB drive in Windows XP
http://www.seagate.com/support/kb/disc/faq/137_winxp.html

Alvin


Lord Odin wrote:

> I installed on this system a fresh install of XP, did all the updates and got everything up to snuff. My HDD was shown at 137gb and I saw the unpartitioned 23gb. I can partition it and use it as another drive but that's not what I want. I want XP to recognize it as 160gb the first time I do a fresh install so that I only have one hard drive. How do I go about doing this? Getting SP1 installed is useless if it gets formatted during XP setup, so what's the point? I've tried doing a repair and that didn't work either.
>> Basically, I want all 160gb on C drive. I have an Abit IC7-G mobo.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Here is a link to detailed step to "slipstream" SP1 and XP (original) into
one CD.

http://www.theeldergeek.com/slipstreamed_xpsp1_cd.htm

"Lord Odin" <anonymous@discussions.microsoft.com> wrote in message
news:E1DA3354-92B9-4C19-A464-F5A151EBD0EC@microsoft.com...
> I installed on this system a fresh install of XP, did all the updates and
got everything up to snuff. My HDD was shown at 137gb and I saw the
unpartitioned 23gb. I can partition it and use it as another drive but
that's not what I want. I want XP to recognize it as 160gb the first time I
do a fresh install so that I only have one hard drive. How do I go about
doing this? Getting SP1 installed is useless if it gets formatted during XP
setup, so what's the point? I've tried doing a repair and that didn't work
either.
>
> Basically, I want all 160gb on C drive. I have an Abit IC7-G mobo.

 

[dl]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

If youve got the pre biglba version of XP you will have to slipstream SP1
and create a new xp inst. disk.
Try a google search 'slipstream winxp'

"Lord Odin" <anonymous@discussions.microsoft.com> wrote in message
news:E1DA3354-92B9-4C19-A464-F5A151EBD0EC@microsoft.com...
> I installed on this system a fresh install of XP, did all the updates and
got everything up to snuff. My HDD was shown at 137gb and I saw the
unpartitioned 23gb. I can partition it and use it as another drive but
that's not what I want. I want XP to recognize it as 160gb the first time I
do a fresh install so that I only have one hard drive. How do I go about
doing this? Getting SP1 installed is useless if it gets formatted during XP
setup, so what's the point? I've tried doing a repair and that didn't work
either.
>
> Basically, I want all 160gb on C drive. I have an Abit IC7-G mobo.