Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

I have 2 512 sticks of corsair value select pc 3200, and an NF7 mobo, AMD
2500+barton, not over clocked, I have read the sticks have to be in either
slot 1, closest to the cpu, and slot 3, or slot 2 and 3 to run dual channel,
I cant even get the computer to boot unless the memory is in slot 1 and 2,
anything other than slot 1 and 2, and i get a long series of error beeps.
any help will be appreciated..

Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

I would suggest you go to the Corsair forums and ask there. Are both sticks
the same version? There seems to be some problems that they can help you
with on going dual channel. I am using two Kingston 512 sticks in 2 and 3
without any problem. They should work, but it might be very technical as to
how you set the 3200s. Also make sure your bios is up to the V23.


--
Pete Iber
peteki@cox.net
"elrod jenkins" <nowhere@somewhere.net> wrote in message
news:108d0o3qbiqat49@corp.supernews.com...
>I have 2 512 sticks of corsair value select pc 3200, and an NF7 mobo, AMD
> 2500+barton, not over clocked, I have read the sticks have to be in
> either
> slot 1, closest to the cpu, and slot 3, or slot 2 and 3 to run dual
> channel,
> I cant even get the computer to boot unless the memory is in slot 1 and 2,
> anything other than slot 1 and 2, and i get a long series of error beeps.
> any help will be appreciated..
>
>

Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

thanks for the reply, I ll check it out..


"peteki" <peteki@cox.net> wrote in message
news:rQHic.20503$432.11144@fed1read01...
> I would suggest you go to the Corsair forums and ask there. Are both
sticks
> the same version? There seems to be some problems that they can help you
> with on going dual channel. I am using two Kingston 512 sticks in 2 and 3
> without any problem. They should work, but it might be very technical as
to
> how you set the 3200s. Also make sure your bios is up to the V23.
>
>
> --
> Pete Iber
> peteki@cox.net
> "elrod jenkins" <nowhere@somewhere.net> wrote in message
> news:108d0o3qbiqat49@corp.supernews.com...
> >I have 2 512 sticks of corsair value select pc 3200, and an NF7 mobo, AMD
> > 2500+barton, not over clocked, I have read the sticks have to be in
> > either
> > slot 1, closest to the cpu, and slot 3, or slot 2 and 3 to run dual
> > channel,
> > I cant even get the computer to boot unless the memory is in slot 1 and
2,
> > anything other than slot 1 and 2, and i get a long series of error
beeps.
> > any help will be appreciated..
> >
> >
>
>