Abit KV7 & Antec 3700amb case

Archived from groups: alt.comp.periphs.mainboard.abit (More info?)

Munish,

The normal configuration is the coloured wire is the positive, that is to
say in case of speaker you have Red + Black, the Red is for Pin 1, in case
of PWR Green & White + Black (well in my case), in a mates case Green +
White, the Green was positive.

Re:

Marcus


"Munish" <no@spam_.com> wrote in message
news r9ic.35984$Y%6.4709763@wards.force9.net...
> I've just bought a Abit KV7 mobo and a Antec SLK3700AMB case.
>
> I'm having trouble figuring out which way the chassis LED's and switch
> cables from the case fit into the motherboard headers. on page 2-9 of the
> mobo manual it says the positive polarity must match between the headers
and
> the cables, but there is no indication on the chassis cables which side is
> positve.
> All the cables from the case have a white wire and the other wire(s) is
> coloured. which side of the cable connector is positive.
>
> The other question is, the mobo has a ATX12V1 connector on top left (page
> 2-4), what is this power connector for and as the case came with a 350w
PSU,
> it has a 20 pin main power connector and a 4pin +12V power connector. Do
i
> need to connect the +12V connector from PSU to the ATX12V1 connector on
the
> mobo.
>
> Hope someone can help.
>
> TIA
>
> Munish
>
>