anyone have info on how to install windows vista drivers for the 428 on windows 7. Will any on this work
Hi JMD51 ,
Follow this Installation Steps it will help you -:
1. Before using the US-428 (power up), it is advisable to first install the appropriate drivers from an included PC/Mac CD-ROM or download from the Internet. Reason see below.
2. The installation
is easy, but here is a possible snag to avoid: Make sure the US-428 is powered down when installing drivers.
3. If the unit is on, Windows automatically detects that a USB device is in the chain and will assign a useless generic driver to it.
4. If Windows driver is installed, the correct Tascam driver may not be installed because Windows driver is already in place.
5. So avoid the hassle and make sure the unit is off during your first install or later when updating drivers.
it was worked on VISTA you can also try on Windows 7 .....