Tom's Hardware Forums » Motherboards & Memory » Aopen » MX4GVR - P4 2.8Ghz Northwood - unable to modify clock rati..
 

MX4GVR - P4 2.8Ghz Northwood - unable to modify clock rati..

Add a reply



 Word :   Username :  
 
Bottom
Author
 Thread : MX4GVR - P4 2.8Ghz Northwood - unable to modify clock rati..
 
Jim
Profile: stranger
More Information
n°803677
06-07-2004 at 12:58:38 PM

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

 

I have an MX4GVR board
BIOS 1.14
Intel Northwood P4 2.8 Ghz chip
The clock ratio is set in the BIOS at 14
It seems like I cannot change it so the chip is running at only 1.8 Ghz

Anyone out there have any ideas, suggestions, solutions ?

Many Thanks

steve

Related Pr oduct
 Register or log in to remove.

Anonymous
More Information
n°803680
06-08-2004 at 05:03:39 PM

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

 

"jim" <tarzan@hotmail.com> wrote:

>I have an MX4GVR board
>BIOS 1.14
>Intel Northwood P4 2.8 Ghz chip
>The clock ratio is set in the BIOS at 14
>It seems like I cannot change it so the chip is running at only 1.8 Ghz
>
>Anyone out there have any ideas, suggestions, solutions ?
>
>Many Thanks
>
>steve

Have you checked the bus speed frequency? It seems yours is set to 133
MHz, which would get approx. 1.8 GHz. It should be set to 200 MHz
(x14=2800 MHz, or 2.8 GHz.)

Jim

remove* *for email


Go to:
Add a reply
  Tom's Hardware Forums » Motherboards & Memory » Aopen » MX4GVR - P4 2.8Ghz Northwood - unable to modify clock rati..
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.285 seconds
Google Ads
Ad
Related Topics
See all relatives topics
News

Intel '09 Roadmap Revealed: Part 2!

Published on September 24, 2008

Trying to decide what your next upgrade is going to be, and when you plan on doing it? Well how about a little information that could help you decide. Read more

Sparkle Announces Passively Cooled 1 GB GeForce 8800 GT Card

Published on December 21, 2007

Sparkle introduced a new GeForce 8800 GT version which comes with 1 GB of memory, instead of the standard 512 MB, as well as passive cooling. Read more

OCZ and Inphi introduce Zero-Buffer DDR

Published on October 06, 2004

OCZ in a joint effort with Inphi nnounced the release of Zero-Buffer DDR (ZB-DDR) technology for unbuffered memory modules. Read more

ATI announces X800 GT, GTO

Published on September 15, 2005

ATI today launched two new graphics cards based on the current X800 core. Read more

Latest Reviews & Articles
Interview: Bigfoot's Killer NIC, Exposed

Interview: Bigfoot's Killer NIC, Exposed

Published on October 02, 2008

Since its release, the Killer NIC has garnered a reputation for being an extravagant and largely unnecessary add-on for the do-it-yourselfer. Seeking additional insight, we approached the card's designer. Read more

Seagate's 1.5TB Barracuda: Bigger And Better?

Seagate's 1.5TB Barracuda: Bigger And Better?

Published on October 02, 2008

Seagate is the first hard drive vendor to offer a 1.5 TB drive in the 3.5” form factor. Meanwhile, WD sent us its RAID Edition 3 (RE3) drive. We tell you which is the best HDD choice today. Read more

Updated CPU Charts 2008: AMD Versus Intel

Updated CPU Charts 2008: AMD Versus Intel

Published on October 01, 2008

The processor is the heart of your PC, and our updated charts for Q3 2008 show 54 of them competing in terms of performance. Using our updated suite of benchmarks, compare your favorite AMD and Intel CPUs after reading this introduction. Read more

Stalker: Clear Sky - Is Your System Ready?

Stalker: Clear Sky - Is Your System Ready?

Published on September 30, 2008

Thinking about picking up the latest update to Stalker, but not sure if your graphics subsystem can handle it? Hang on as we take you through a performance tour and demonstrate how the game has been prettied up. Read more

All the Reviews & Articles