Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

AOpen AX4B motherboard in a computer that I built, all working just fine  
for several months.  Now, when we press the power button, we get an  
alarm tone through the PC's speaker -- about a three second tone, then  
two seconds of silence, then the tone again, with this cycle repeating  
as long as the power's switch is on.  The thing doesn't start up, and  
there's nothing on the screen.  I happened to notice that while this is  
happening, an orange LED on the motherboard flashes regularly; it's  
labelled "standby LED."  
 
Anybody know what's wrong?  Couldn't find any useful information on this  
problem at the AOpen web site.
 
Jacques

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

Have you tried clearing the CMOS RAM?
 
On Fri, 1 Jul 2005 15:56:45 -0400, Jacques Clouseau
<jacquesclouseau@yahoo.com> wrote:
 
>AOpen AX4B motherboard in a computer that I built, all working just fine  
>for several months.  Now, when we press the power button, we get an  
>alarm tone through the PC's speaker -- about a three second tone, then  
>two seconds of silence, then the tone again, with this cycle repeating  
>as long as the power's switch is on.  The thing doesn't start up, and  
>there's nothing on the screen.  I happened to notice that while this is  
>happening, an orange LED on the motherboard flashes regularly; it's  
>labelled "standby LED."  
>
>Anybody know what's wrong?  Couldn't find any useful information on this  
>problem at the AOpen web site.
>
>Jacques

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?)

In article <q4bcc1t5a8vhmph0g507voaarocjver8vu@4ax.com>, 1@2.3 says...
> Have you tried clearing the CMOS RAM?
>  
> On Fri, 1 Jul 2005 15:56:45 -0400, Jacques Clouseau
> <jacquesclouseau@yahoo.com> wrote:
>  
> >AOpen AX4B motherboard in a computer that I built, all working just fine  
> >for several months.  Now, when we press the power button, we get an  
> >alarm tone through the PC's speaker -- about a three second tone, then  
> >two seconds of silence, then the tone again, with this cycle repeating  
> >as long as the power's switch is on.  The thing doesn't start up, and  
> >there's nothing on the screen.  I happened to notice that while this is  
> >happening, an orange LED on the motherboard flashes regularly; it's  
> >labelled "standby LED."  
> >
> >Anybody know what's wrong?  Couldn't find any useful information on this  
> >problem at the AOpen web site.
> >
> >Jacques
>  
>  
 
Yes, I did -- but that didn't help.
 
Jacques

Hi Jacques,  
do you have any solution for the stand by problem wit AX4b now?
 
I have the same problem.
 
tlmayr

have you tried another RAm module?? 3 beeps usually are ram problem.