A7V and Win2000 with Promise Ultra100

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I get these errors on boot of Win 2000 (NTFS) in the event viewver:

The device, \Device\Scsi\Ultra1, did not respond within the timeout
period.
An error was detected on device \Device\Harddisk0\DR0 during a paging
operation.

I read several post on this problem but I have not found a solution.

System configuration is:

Asus A7V motherboard (bios ver. 1011 currently BY BrazilianTech)
700Mhz Athlon
256MB SDRAM 100 Mhz
Disk: IBM-DTLA-300520 LBA 19,6 ULTRA DMA 5
Via Bus Master IDE Controller (version 5.0.2195.120)
Prommise Ultra100 IDE controller (bios 2.20.014)
NIC 2com etherlink XL PCI (3C900-COMBO)
ASUS CD-S500/A
NVidea Riva TNT2 Ultra

Current BIOS setup:

Primary Master IDE=NONE
Primary Slave IDE=NONE
Secondary Master IDE=NONE
Secondary Slave IDE=NONE

Boot section
Removable: Legacy floppy
IDE: None
ATAPI: ASUS CD-S500/A
Other: Int 18 Network card

Boot SCSI/ATA100: [SCSI/ATA100]
Load onboard ATA BIOS: [Auto]


this is my BOOT.INI

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000
Server" /fastdetect

TIA
Lorenzo