OK I really need a good OC guide for the a7n8x-dlx rev2

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I have read about 3 or 4 guides and they get more confusing and
convoluted each time.

Anyone give me some tips/guidelines for my board xp2600+ barton and my
ram 2x256
ocz400256EL 2-2-3-6

I have it running currently at 2192mhz 10.5x208 vcore 1.675(1.7 actual)
Stable in prime95 and memtest86+ v1.15 for 8hrs
I havent played with the vdimm yet.
I barely understand the agp core stuff
where do i go from here?

thx
Gordon

 

[nOm]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Gordon Scott wrote:
> I have read about 3 or 4 guides and they get more confusing and
> convoluted each time.
>
> Anyone give me some tips/guidelines for my board xp2600+ barton and my
> ram 2x256
> ocz400256EL 2-2-3-6
>
> I have it running currently at 2192mhz 10.5x208 vcore 1.675(1.7
> actual) Stable in prime95 and memtest86+ v1.15 for 8hrs
> I havent played with the vdimm yet.

What's VDIMM at now ? 2.5v ? If so, set it to 2.8v.

Leave your multiplier at 10.5, and slowly raise the FSB (208) until you lose
stability.
Then Increase the CPU voltage a simdgeon.
Repeat until it's either running too hot (anything under 60c full-load is
fine), or you lose stability.

That's all there is to it.

> I barely understand the agp core stuff

Leave it alone.