Will P4C800-E Dlx. fit in same case as P4T533-C?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I am upgrading from a P4T533-C to a P4C800-E Deluxe. Will the new
motherboard fit in the same case? I am using an ANTEC Server Chasis
(Workstation Tower) Model SX1040B with 400 watt power supply.
Thanks!

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"Hellenason7" <hellenason7@aol.com> wrote in message
news:20040606160140.27585.00000737@mb-m05.aol.com...
> I am upgrading from a P4T533-C to a P4C800-E Deluxe. Will the
new
> motherboard fit in the same case? I am using an ANTEC Server Chasis
> (Workstation Tower) Model SX1040B with 400 watt power supply.
> Thanks!


Yes. It will accept any motherboard with the ATX form factor, such as the
P4C800E-deluxe.
Jon

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

On Sun, 06 Jun 2004 20:01:40 +0000, Hellenason7 wrote:

> I am upgrading from a P4T533-C to a P4C800-E Deluxe. Will the new
> motherboard fit in the same case? I am using an ANTEC Server Chasis
> (Workstation Tower) Model SX1040B with 400 watt power supply.
> Thanks!

Just out of curiousity,

Why would you bother upgrading from that board? Are you using PC800 or
pc1066 (or PC600/700) memory, and what size? I know that RDRAM's too
expensive, but the system speed is very competitive, especially at 1066...

--
We HAVE been at war with Iraq for 13 years now, bombing their
country on at least a weekly basis.
"U.S.-led sanctions have killed over a million Iraqi citizens,
according to UN studies" - James Jennings
3,000+ innocent Iraqi civilian casualties can't be "wrong"...

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

>Why would you bother upgrading from that board?

Hello. The Asus spec site states that the board can take up to 256 MB
RDRAM's (4x256). I have one GB of Samsung 1066 loaded, but I need more memory
for my applications.
Do you know if this board can also accept 512 RDRAM chips? I'd like
to put in 2x512 + 2x256 or 4x512 (1066). If I can get away with 1.5 or 2 Gigs
of memory in this board, then I don't have to upgrade immediately. Thanks.