Would a Mobile Xp2500 with in a Asus A7n8x-e-Deuluxe ?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Would like to run it at 2.4 ghz atleast and that would be 400fsb,
would this run cooler than a normal 2500 barton ? or 3200 ?


Thanks.

/ps with good cooling and higher voltage what can i do with this chip
?

Does the bios support this chip latest Bios Revision is 1.04 i think,
and does it show it correctly ?


Thanks.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

In message <8rk3d0d0ibb7i1c77akcaq567t6tk119c6@4ax.com>, Paul Mathews
<paulm@yahoo.com.au> writes
>Would like to run it at 2.4 ghz atleast and that would be 400fsb,
>would this run cooler than a normal 2500 barton ? or 3200 ?

If you get one of the low voltage ones and are lucky enough for it to
run at 2.4 without having to bump the voltage up - yes
Otherwise - no
--
__________________________________________________
Personal email for Gareth Jones can be sent to:
'usenet4gareth' followed by an at symbol
followed by 'uk2' followed by a dot
followed by 'net'
__________________________________________________

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"Paul Mathews" <paulm@yahoo.com.au> wrote in message
news:8rk3d0d0ibb7i1c77akcaq567t6tk119c6@4ax.com...
>
>
> Would like to run it at 2.4 ghz atleast and that would be 400fsb,
> would this run cooler than a normal 2500 barton ? or 3200 ?
>
>
> Thanks.
>
> /ps with good cooling and higher voltage what can i do with this chip
> ?
>
> Does the bios support this chip latest Bios Revision is 1.04 i think,
> and does it show it correctly ?
>
>
> Thanks.
>

The latest BIOS for the A7N8X-E Deluxe is 1011.

Luck;
Ken

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Haven't got the e-deluxe board, just a revision 2. A7N8X-Deluxe. Running an
XP-m2500 IQ stepping (with L12 mod) at 1.65v 225*12 (2.7Ghz) on air - full
load diode temps 50/51...

HTH

Dom


"Gareth Jones" <usenet@nospam.demon.co.uk> wrote in message
news:wT5PhjIAte0AFwcT@nospam.demon.co.uk...
> In message <8rk3d0d0ibb7i1c77akcaq567t6tk119c6@4ax.com>, Paul Mathews
> <paulm@yahoo.com.au> writes
> >Would like to run it at 2.4 ghz atleast and that would be 400fsb,
> >would this run cooler than a normal 2500 barton ? or 3200 ?
>
> If you get one of the low voltage ones and are lucky enough for it to
> run at 2.4 without having to bump the voltage up - yes
> Otherwise - no
> --
> __________________________________________________
> Personal email for Gareth Jones can be sent to:
> 'usenet4gareth' followed by an at symbol
> followed by 'uk2' followed by a dot
> followed by 'net'
> __________________________________________________