4150 Hard Reset

Archived from groups: microsoft.public.pocketpc (More info?)

"MSR" <Reply to ng> wrote in message
news:uV9uLiKUEHA.1020@TK2MSFTNGP11.phx.gbl...
> Does anyone know how to do a hard reset on a 4150?
>
Isn't it "Press the leftmost button and the rightmost button and at the same
time hit the normal reset button with the sylus point". You need to have a
friend use the stylus or hold it in you mouth!

Roger

Archived from groups: microsoft.public.pocketpc (More info?)

"MSR" <Reply to ng> schreef in bericht
news:uV9uLiKUEHA.1020@TK2MSFTNGP11.phx.gbl...
> Does anyone know how to do a hard reset on a 4150?
>
> Cheers
>
> Mark.
>
>

The reset button is on the left-hand side in the middle. Just press it with
your stylus.

Gr.
Oprion.

Archived from groups: microsoft.public.pocketpc (More info?)

Oprion.
Just pushing the reset button only does a soft reset.
For a hard reset, you need to hold down the far right and left button at the
same time and push the reset button. Takes a few times to practice to get
this one to work unless you have very flexible fingers.

--
Tedd Riggs
PDA Square Content Developer
www.pdasquare.com
Redmond, WA



"Option" <Geenm@il.adres> wrote in message
news:cafmm2$gpl$1@reader13.wxs.nl...
> "MSR" <Reply to ng> schreef in bericht
> news:uV9uLiKUEHA.1020@TK2MSFTNGP11.phx.gbl...
>> Does anyone know how to do a hard reset on a 4150?
>>
>> Cheers
>>
>> Mark.
>>
>>
>
> The reset button is on the left-hand side in the middle. Just press it
> with
> your stylus.
>
> Gr.
> Oprion.
>
>

Archived from groups: microsoft.public.pocketpc (More info?)

First press and hold the reset button (on the left-hand side ) with your
stylus
then press and hold the power button
then release power button ,
finaly release reset button.

Archived from groups: microsoft.public.pocketpc (More info?)

Thanks ZeZu. This one worked.

I would have tried the other options but am limited by the fact that I have
only two hands. If I had more then I probably would not need an Ipaq!

Thanks to everyone for your suggestions.

Mark.
"ZeZu" <zezu@(at)myself.com> wrote in message
news:c260e02bb96e56f3db8d3203aae0744e@news.teranews.com...
> First press and hold the reset button (on the left-hand side ) with your
> stylus
> then press and hold the power button
> then release power button ,
> finaly release reset button.
>
>