Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
I currently have an A7N8X Deluxe MB with an AthlonXP 2600 processor. I'd
like to upgrade to an AthlonXP 3200 Barton core with the same MB. Obviously
it's a faster processor but I could also jump my FSB from 333mhz to 400mhz
with this upgrade.
Can anyone advise me if I'll see a noticeable increase in speed with this
upgrade?
>I currently have an A7N8X Deluxe MB with an AthlonXP 2600 processor. I'd
>like to upgrade to an AthlonXP 3200 Barton core with the same MB. Obviously
>it's a faster processor but I could also jump my FSB from 333mhz to 400mhz
>with this upgrade.
>
>Can anyone advise me if I'll see a noticeable increase in speed with this
>upgrade?
>
>Thanks
>Phee
>
>
I'd only upgrade to a Barton 3200+ if you have PC3200 ram or can run
your ram @ the FSB speed, running CPU and ram out of sync isn't very
good for performance or stability.
If you have PC3200 (and don't mind overclocking a little) I'd just raise
the bus speed while keeping the ram in sync of FSB,(100% in bios) and
set CPU vcore a step or two over default if needed for stability. Most
T-bred/Barton cores do 2300-2400MHz no problem with just a little vcore
boost.
Noticeable increase in speed? Google for some benchmarks?
FSB Details
CLK speed (MHz) 133 ~ 166 166 ~ 200 up to 200 * up to 200 * up to 200 * up
to 200 *
Data transfer rate (MHz) 266 ~ 333 333 ~ 400 up to 400 * up to 400 * up to
400 * up to 400 *
Bus width (bits) 64 64 64 x 1 / 2 * 64 x 1 / 2 * 64 x 2 * 64 x 2 *
Maximum bandwidth (GB/sec) up to 2.67 up to 3.20 up to 3.2 / 6.4 * up to
3.2 / 6.4 * up to 6.4 * up to 6.4 *
HyperTransport Links - - 1 1 1 3
Bus speed (MHz) - - up to 1000 up to 1000 up to 1000 800
Max bandwidth per dir (GB/sec) - - up to 4.0 up to 4.0 up to 4.0 3.2
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.