Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
Drive Image and Ghost backup and restore partitions from their dos booted
disks. Has anyone *seen* it successfully find a usb 2 or firewire drive
when in dos? Thanks.
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
> Drive Image and Ghost backup and restore partitions from their dos booted
> disks. Has anyone *seen* it successfully find a usb 2 or firewire drive
> when in dos? Thanks.
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
This is something I've been upset about for the last month.
I have an Iomega DHD250-U external USB2.0 Hard Drive and a Vantec NexStar
external 3.5" HD enclosure with USB2.0 interface (which uses the Ali M5621),
and a Shikatronics Travelling Disk, USB1.1 Key Disk.
I have asked the same question and not received any response from several
stores and ng.
So far:
Asus A7N8X Deluxe 2.0 UAYZ nForce2 400 (1007)
- no combination of BIOS setting, or jumpered +5VSB for the USB ports will
enable booting from any of my USB devices. Is it an IRQ issue? The POST
displays the USB Key as detected, but fails to even try to boot from it.
POST fails to see USB HDDs at all.
- booting with a WME FD complete with the Panasonic 'magical' 2.15 USB
driver along with the DI1000 ASPI driver, all three onboard controllers are
recognized. My USB mouse, the Key Disk and the NexStar are recognized, but
only the Key Disk is assigned a drive letter by the DI1000 ASPI, and only
after the +5VSB USB jumper is set.
- booting with the IOMEGA USB/FireWire DOS boot diskette; I can now access
the Iomega drive. The same FD fails to detect the Vantec. The Iomega
OHCI/UHCI (1.1) drivers see nothing at all. The Iomega EHCI (2.0) driver
IDs the Vantec drive but then freezes and goes nowhere.
Asus P4P800VM
- natively can boot to the USB Key Disk and the Iomega USB HDD without
external drivers or a FD.
Asus P4BGLMX533
- booting with the IOMEGA USB/FireWire DOS boot diskette; I can access the
Iomega drive.
- it was a busy day, so I can't recall clearly if the Panasonic/DI1000 also
worked
- the BIOS has the same useless settings as the A7N8X Deluxe 2.0 and the
same results for native support
Asus K8V? (not certain on this model name)
- no native support despite what the BIOS said
- the Panasonic drivers could see the key disk, and I believe the NexStar.
Not entirely comprehensive testing, but so far, the Iomega drive appears to
be the best bet for USB HDD. The P4P800VM is the ONLY mobo that I know of so
far that has native USB booting capabilities.
I've asked for recommendations of other empirically witnessed USB booting
motherboards, but have received no replies yet.
--
]Robert[
"Nick Mirro" <nickmirro@attbi.com> wrote in message
news:8cudnWzYl7KZj8LcRVn-qQ@comcast.com...
> Drive Image and Ghost backup and restore partitions from their dos booted
> disks. Has anyone *seen* it successfully find a usb 2 or firewire drive
> when in dos? Thanks.
>
> Bios 1007
>
> Nick
>
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
Yes indeed. Thank you.
"Tone-EQ" <tony.cue@tiscali.co.uk> wrote in message
news:2s8lubF1ila80U1@uni-berlin.de...
>> Drive Image and Ghost backup and restore partitions from their dos booted
>> disks. Has anyone *seen* it successfully find a usb 2 or firewire drive
>> when in dos? Thanks.
>
> Maybe this might help?
> http://www.bootdisk.com/usb.htm > --
> Regards,
> Tony. (tony.cue(at)tiscali.co.uk)
>
> Discogs: building the definitive database of electronic music...
> http://www.discogs.com >
>
i had the USB problem as well but i called there support line on there site and they told me how to fix the usb problem this is how you do it
start / settings / control panel / system / hardware(tab) / device manager / look at the bottom for universal serial bus controllers click the [+] box then
delete the (host controller) and all (USB root Hubs)
note you will lose all USB function when you do this so if you have a USB mouse lol it will stop working
but fear not! lol just restart your computer it will figure out that the drivers are missing it will auto update them (this may take a few min for it to complete) and then it will start to recognize your devices then they will all work again!
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.