Asus A7N8X Deluxe Rev2 - Sound Issue

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Any ideas?

I've been using the front panel connections on the m/b for about 8
months. I decided to go back to using the rear connections. I removed
front panel connections from the m/b and then found out the rear
connections no longer work. When I reconnect to the front panel pins
on the m/b I get sound.

Anyone have any idea how I can get my rear connections to work again?

thecalman

 

[Ed]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

On Sun, 03 Oct 2004 15:47:42 GMT, thecalman <thecalman@comcast.net>
wrote:

>Any ideas?
>
> I've been using the front panel connections on the m/b for about 8
>months. I decided to go back to using the rear connections. I removed
>front panel connections from the m/b and then found out the rear
>connections no longer work. When I reconnect to the front panel pins
>on the m/b I get sound.
>
>Anyone have any idea how I can get my rear connections to work again?
>
>thecalman

see FP_AUDIO in A7N8X manual.
Check that you have two jumpers on the FP_AUDIO header.

eD

 

[Rob]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

thecalman wrote:

> Any ideas?
>
> I've been using the front panel connections on the m/b for about 8
> months. I decided to go back to using the rear connections. I removed
> front panel connections from the m/b and then found out the rear
> connections no longer work. When I reconnect to the front panel pins
> on the m/b I get sound.
>
> Anyone have any idea how I can get my rear connections to work again?
>
> thecalman

After removing the front connectors from
the MB header, are you reinstalling the
jumpers in between the 2 channels Line
and B_Line pins? They are needed to pipe
the signal to the rear jacks.HTH.
Rob

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

On Sun, 03 Oct 2004 15:47:42 GMT, thecalman <thecalman@comcast.net>
wrote:

Gentlemen,
Many thanks. I forgot to replace the jumpers.

thecalman

 

[Paul]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

In article <r370m0pucu6v0ff90ravnp8q5eg6534j01@4ax.com>, thecalman
<thecalman@comcast.net> wrote:

> Any ideas?
>
> I've been using the front panel connections on the m/b for about 8
> months. I decided to go back to using the rear connections. I removed
> front panel connections from the m/b and then found out the rear
> connections no longer work. When I reconnect to the front panel pins
> on the m/b I get sound.
>
> Anyone have any idea how I can get my rear connections to work again?
>
> thecalman

When you remove the front panel wiring, you are supposed to put two
jumper plugs back on the header. Only the manual for the A7N8X-E
shows the jumper plugs - see page 46 of:

ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/nforce2/a7n8x-e/e1322_a7n8x-e_deluxe.pdf

HTH,
Paul