Sign in with
Sign up | Sign in
Your question

Asus P4P800 SE problem

Last response: in Motherboards
Share
Anonymous
a b V Motherboard
October 8, 2004 3:31:49 AM

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Hi all.

Dont know if you can help me or not but i get this when i boot up

NEW CPU INSTALLED! Please enter Setup to configure your system.

[F1] to run Setup
[F2] to load Default and continue


i have tried setup and saving but as soon as i reboot with new
settings i get the same message.

i have tried replacing the CMOS battery. clearing the CMOS and
replaced jumpers but none of them solve the problem. i have tried
contacting asus but i get no response and their support forums are
down.


any help woul be appreciated and i will post system specs if needed


Thankyou

More about : asus p4p800 problem

Anonymous
a b V Motherboard
October 8, 2004 3:05:41 PM

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Sometimes, the BIOS isn't able to determine the correct FSB from the CPU, so
it sets everything on the lowest possible.

Enter the setup and change it (under advanced? ) i.e. there are 2 - 4
values for CPU speed or something. Once correctly set it should work fine.

Martin
October 8, 2004 6:31:46 PM

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

In article <3e3924fd.0410072231.377149ce@posting.google.com>,
d_macale@hotmail.com (DioMac) wrote:

> Hi all.
>
> Dont know if you can help me or not but i get this when i boot up
>
> NEW CPU INSTALLED! Please enter Setup to configure your system.
>
> [F1] to run Setup
> [F2] to load Default and continue
>
>
> i have tried setup and saving but as soon as i reboot with new
> settings i get the same message.
>
> i have tried replacing the CMOS battery. clearing the CMOS and
> replaced jumpers but none of them solve the problem. i have tried
> contacting asus but i get no response and their support forums are
> down.
>
>
> any help woul be appreciated and i will post system specs if needed
>
>
> Thankyou

Two places to look - the download page, and the cpusupport page:

(Click the BIOS button, then click "More" next to each release)
http://www.asus.com.tw/support/download/item.aspx?Model...

(Enter P4P800 and select from the returned menu)
http://www.asus.com.tw/support/cpusupport/cpusupport.as...

I notice that the 1006 BIOS says it "supports new CPUs", but
the cpusupport page doesn't show any processors as needing 1006.

I would try flashing a newer BIOS (or post and tell us what BIOS
you are currently using). There is even a beta BIOS, if you
want to try that.

It would also help if you mentioned the type of processor. The package
the processor came in, has an SSPEC (SLxxx) code on it, and a
longer order number. They can be looked up on processorfinder.intel.com
.. If you post again, give details like that, as if you are using
a very recent processor, it just might be a lack of proper support
in the BIOS.

For example, some Prescott processors can be run at the wrong speed
by the BIOS (2.8GHz, no matter what speed it says on the package),
and this is due to a piece of code missing from the BIOS, to handle
the power configuration for the board. (The Platform Requirement Bit
or PRB.)

The cpusupport page also says a 3.4E Prescott can only be used in
a rev2 board, so that is also a possible reason for the strange
behavior. Telling us the exact processor type helps, but in this
case, flashing the BIOS is probably the only option you haven't
tried.

HTH,
Paul
Related resources
Anonymous
a b V Motherboard
October 27, 2004 4:21:04 PM

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

On Fri, 08 Oct 2004 14:31:46 -0400, nospam@needed.com (Paul) wrote:

>In article <3e3924fd.0410072231.377149ce@posting.google.com>,
>d_macale@hotmail.com (DioMac) wrote:
>
>> Hi all.
>>
>> Dont know if you can help me or not but i get this when i boot up
>>
>> NEW CPU INSTALLED! Please enter Setup to configure your system.
>>
>> [F1] to run Setup
>> [F2] to load Default and continue
>>
>>
>> i have tried setup and saving but as soon as i reboot with new
>> settings i get the same message.
>>
>> i have tried replacing the CMOS battery. clearing the CMOS and
>> replaced jumpers but none of them solve the problem. i have tried
>> contacting asus but i get no response and their support forums are
>> down.
>>
>>
>> any help woul be appreciated and i will post system specs if needed
>>
>>
>> Thankyou
>
>Two places to look - the download page, and the cpusupport page:
>
>(Click the BIOS button, then click "More" next to each release)
>http://www.asus.com.tw/support/download/item.aspx?Model...
>
>(Enter P4P800 and select from the returned menu)
>http://www.asus.com.tw/support/cpusupport/cpusupport.as...
>
>I notice that the 1006 BIOS says it "supports new CPUs", but
>the cpusupport page doesn't show any processors as needing 1006.
>
>I would try flashing a newer BIOS (or post and tell us what BIOS
>you are currently using). There is even a beta BIOS, if you
>want to try that.
>
>It would also help if you mentioned the type of processor. The package
>the processor came in, has an SSPEC (SLxxx) code on it, and a
>longer order number. They can be looked up on processorfinder.intel.com
>. If you post again, give details like that, as if you are using
>a very recent processor, it just might be a lack of proper support
>in the BIOS.
>
>For example, some Prescott processors can be run at the wrong speed
>by the BIOS (2.8GHz, no matter what speed it says on the package),
>and this is due to a piece of code missing from the BIOS, to handle
>the power configuration for the board. (The Platform Requirement Bit
>or PRB.)
>
>The cpusupport page also says a 3.4E Prescott can only be used in
>a rev2 board, so that is also a possible reason for the strange
>behavior. Telling us the exact processor type helps, but in this
>case, flashing the BIOS is probably the only option you haven't
>tried.
>
>HTH,
> Paul

I encountered the same problem

I just assembled a new computer using
1) P4P800SE Motherboard, AMI BIOS Ver. 1.007 (latest)
2) Intel Pentium4 3.0E (Prescot)
3) 1x512 Apacer PC3200 memory
4) 1 IDE drive (Quantum), 1 SATA drive (WDC), 1 CDROM (SONY)
5) WinXP Pro SP2
All bios settings (except boot seguence etc) are default. Everytime I
boot I get the
following boot screen from the BIOS:

" AMERICAN
MEGATRENDS

DDR Frequency 400 MHz. Single-Channel or Virtual Single-Channel
Checking NVRAM... 512 MB OK

Auto-Detecting Pri Master.....IDE HardDisk
Auto-Detecting Sec. Master....ATAPI CD-ROM
Auto-Detecting 3rd Master.....IDE HardDisk
Pri Master: QUANTUM FIREBAL LCT1507 A01.0F00
Ultra DMA Mode-4 S.M.A.R.T Capable & Status OK
Sec Master: SONY CDU4811 PY08
Ultra DMA Mode-2
3rd Master: WDC WD360GD-00FNA0 3506K35
Ultra DMA Mode-5 S.M.A.R.T Capable & Status OK
Auto-detecting USB Mass Storage Devices
00 USB mass storage devices found & configured
New CPU Installed! Please enter Setup to configure your system
Press F1 to Run Setup
Pess F2 to load default values & continue."

This screen appear again after I press F1, configure and exit option
'Exit & Save Changes'.
Checked and confirmed that the changes has been saved but screen
appear again on reboot.
However if I press exit option 'Exit & Discard Changes', it will then
reboot correctly i.e to the boot device as specified in the boot
sequence and WinXP Pro runs normal.

I have done the following but results negative

1) Clear CMOS memory by removing onboard battery and moving jumper
from pins 1-2 to pins 2-3 for over 5 mins and move jumper back to pins
1-2.Replace battery
2) Checked and confirmed battery is OK i.e 3.0V off and on the board.
3) Remove all devices (Drives, CDROM) except Moinitor, Mouse &
Keyboard
4) Reflash BIOS to the lastest Version.1.007 using DOS command AFUDOS
as well as ASUS EZ Flash.
5) MemTest the 512MB DDR for over 8 hrs with zero error.

What else do you recommend I do to fix the problem of recurrence boot
screen appearing so it will boot into WinXP on startup or reboot on
BIOS changes save?

TIA
Anonymous
a b V Motherboard
January 13, 2010 7:17:29 AM

I have my p4p800 SE (550ATX Power Supply,1gb memory,258 Video card, and 3.2 processor)...

The problem is.. when i open the CPU the mobo is working...
but nothing appears on screen ...




what should i do ..?

help...

e-mial : duffei@yahoo.com


thanks...!!!
!