a7n8x or a7m266d take mobile cpu?

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Does anyone know if the AMD Mobile cpu's can function on

A7N8X - DLX with (v)2 pcb

..or..

A7M266-D

I saw where someone mentioned a wire trick and read where another person
sent out a motherboard for repair after trying a mobile chip.

Anyone have any experience with bridging new enameled cpu's? I assume the
mobiles are enameled. My original XP 2100+ were not and the L5 was bridged
easily.

...thanks..

 

[Rob]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Beemer Biker wrote:

>Does anyone know if the AMD Mobile cpu's can function on
>
>A7N8X - DLX with (v)2 pcb
>
> ..or..
>
>A7M266-D
>
>I saw where someone mentioned a wire trick and read where another person
>sent out a motherboard for repair after trying a mobile chip.
>
>Anyone have any experience with bridging new enameled cpu's? I assume the
>mobiles are enameled. My original XP 2100+ were not and the L5 was bridged
>easily.
>
>..thanks..
>
>
>
>
>
A7N8X-Deluxe v2.0 here running a XP2500+ Mobile Processor with no
problems or mods to anything besides BIOS Settings. Running it at
2205mhz(400*11) with PC3200 memory. Typically runs at 52C on the diode
temp. without expensive cooling.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

"Rob" <robc@insightbb.spambone.com> wrote in message
newsC3Bd.591359$wV.519050@attbi_s54...
> Beemer Biker wrote:
>
> >Does anyone know if the AMD Mobile cpu's can function on
> >
> >A7N8X - DLX with (v)2 pcb
> >
> > ..or..
> >
> >A7M266-D
> >
> >I saw where someone mentioned a wire trick and read where another person
> >sent out a motherboard for repair after trying a mobile chip.
> >
> >Anyone have any experience with bridging new enameled cpu's? I assume
the
> >mobiles are enameled. My original XP 2100+ were not and the L5 was
bridged
> >easily.
> >
> >..thanks..
> >
> >
> >
> >
> >
> A7N8X-Deluxe v2.0 here running a XP2500+ Mobile Processor with no
> problems or mods to anything besides BIOS Settings. Running it at
> 2205mhz(400*11) with PC3200 memory. Typically runs at 52C on the diode
> temp. without expensive cooling.


FWIW and direct from Beijing!!!...

http://stateson.net/pub/a7n8x-no-mobile.txt

....techie claims it will run at wrong voltage as the bios will not recognize
it...

============================
My son's board is currently in for repair, a capacitor blew. I gave him the
newer "E" deluxe motherboard and when I get the rev 2.0 back I was going to
mess with it and see if it can take a mobile.

I have my own A7M266-D with two 2100+ XP modded cpus. Was thinking of
possibly trying those mobiles out but I just got thru reading at amd
overclockers that there seems to be trouble with that motherboard. My 2100+
are rock stable.

 

[Rob]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Beemer Biker wrote:

>"Rob" <robc@insightbb.spambone.com> wrote in message
>newsC3Bd.591359$wV.519050@attbi_s54...
>
>
>>Beemer Biker wrote:
>>
>>
>>
>>>Does anyone know if the AMD Mobile cpu's can function on
>>>
>>>A7N8X - DLX with (v)2 pcb
>>>
>>> ..or..
>>>
>>>A7M266-D
>>>
>>>I saw where someone mentioned a wire trick and read where another person
>>>sent out a motherboard for repair after trying a mobile chip.
>>>
>>>Anyone have any experience with bridging new enameled cpu's? I assume
>>>
>>>
>the
>
>
>>>mobiles are enameled. My original XP 2100+ were not and the L5 was
>>>
>>>
>bridged
>
>
>>>easily.
>>>
>>>..thanks..
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>A7N8X-Deluxe v2.0 here running a XP2500+ Mobile Processor with no
>>problems or mods to anything besides BIOS Settings. Running it at
>>2205mhz(400*11) with PC3200 memory. Typically runs at 52C on the diode
>>temp. without expensive cooling.
>>
>>
>
>
>FWIW and direct from Beijing!!!...
>
>http://stateson.net/pub/a7n8x-no-mobile.txt
>
>...techie claims it will run at wrong voltage as the bios will not recognize
>it...
>
>============================
>My son's board is currently in for repair, a capacitor blew. I gave him the
>newer "E" deluxe motherboard and when I get the rev 2.0 back I was going to
>mess with it and see if it can take a mobile.
>
>I have my own A7M266-D with two 2100+ XP modded cpus. Was thinking of
>possibly trying those mobiles out but I just got thru reading at amd
>overclockers that there seems to be trouble with that motherboard. My 2100+
>are rock stable.
>
>
>
There is *some* truth in what Bejing says. The BIOS does not properly
identify the chip. Motherboard Monitor shows 1.62v applied as Vcore,
whereas AMD recommends 1.45v for my chip. I say, I know what chip I
put in there and a .17v bump in Vcore is not unusual when overclocking
as I'm doing. Will it cause failure to come sooner? Maybe. Got my
eyes on a AMD64 system if it does but it's been rock solid for 6 months
now. Still runs the torture test of Prime95 with no errors. If you've
got those 2100's modded to give you equal to a 3000+ or better, that'll
work too! Hope you find something encouraging for the 266-D.
Rob

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Ive got 3 identical machines being mobile 2500+ running at 3300+ on
a7n8x-x's. They run perfectly with stock cooling at 1.45v or so. Great
boards/chips.

"Beemer Biker" <joestateson@grandecom.net> wrote in message
news:10t94tjnfikm50@corp.supernews.com...
> Does anyone know if the AMD Mobile cpu's can function on
>
> A7N8X - DLX with (v)2 pcb
>
> ..or..
>
> A7M266-D
>
> I saw where someone mentioned a wire trick and read where another person
> sent out a motherboard for repair after trying a mobile chip.
>
> Anyone have any experience with bridging new enameled cpu's? I assume the
> mobiles are enameled. My original XP 2100+ were not and the L5 was
bridged
> easily.
>
> ..thanks..
>
>
>