kyle

Distinguished
Apr 14, 2004
145
0
18,680
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I just setup a new computer. Gigabyte K8N Pro, and 2
Western Digital 80g SATA Harddrives. I intended to run
those drives in RAID 0. I setup the BIOS, and had
everything recognizing the array. Then, I tried to install
Windows XP Pro. At the begining of the install, a gray bar
appears at the bottom of the screen. "Press F6 if you need
to install 3rd party RAID SCSI drivers." Or somthing like
that. I press F6, but the installation continues on like I
didn't even press it. The keyboard is fine, because I can
get into the next option by pressing F2. Any ideas?.....
Please?....... Thanks, -Kyle
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

If your keyboard is an office style that can change the F key functions -
Make sure the Fkeys are set to standard mode. I was caught by this problem
when I first installed xp.


"Kyle" <anonymous@discussions.microsoft.com> wrote in message
news:17f601c46f5b$98508f60$a401280a@phx.gbl...
> I just setup a new computer. Gigabyte K8N Pro, and 2
> Western Digital 80g SATA Harddrives. I intended to run
> those drives in RAID 0. I setup the BIOS, and had
> everything recognizing the array. Then, I tried to install
> Windows XP Pro. At the begining of the install, a gray bar
> appears at the bottom of the screen. "Press F6 if you need
> to install 3rd party RAID SCSI drivers." Or somthing like
> that. I press F6, but the installation continues on like I
> didn't even press it. The keyboard is fine, because I can
> get into the next option by pressing F2. Any ideas?.....
> Please?....... Thanks, -Kyle
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Is that a setting in the BIOS? I don't remember seeing it
in there. I don't have windows on the computer yet, so if
it's a windows setting, then I'm pretty sure that isn't it.

>-----Original Message-----
>If your keyboard is an office style that can change the F
key functions -
>Make sure the Fkeys are set to standard mode. I was
caught by this problem
>when I first installed xp.
>
>
>"Kyle" <anonymous@discussions.microsoft.com> wrote in
message
>news:17f601c46f5b$98508f60$a401280a@phx.gbl...
>> I just setup a new computer. Gigabyte K8N Pro, and 2
>> Western Digital 80g SATA Harddrives. I intended to run
>> those drives in RAID 0. I setup the BIOS, and had
>> everything recognizing the array. Then, I tried to
install
>> Windows XP Pro. At the begining of the install, a gray
bar
>> appears at the bottom of the screen. "Press F6 if you
need
>> to install 3rd party RAID SCSI drivers." Or somthing
like
>> that. I press F6, but the installation continues on
like I
>> didn't even press it. The keyboard is fine, because I
can
>> get into the next option by pressing F2. Any ideas?.....
>> Please?....... Thanks, -Kyle
>
>
>.
>
 

kyle

Distinguished
Apr 14, 2004
145
0
18,680
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Is that a setting in the BIOS? I don't remember seeing it
in there. I don't have windows on the computer yet, so if
it's a windows setting, then I'm pretty sure that isn't it.

>-----Original Message-----
>If your keyboard is an office style that can change the F
key functions -
>Make sure the Fkeys are set to standard mode. I was
caught by this problem
>when I first installed xp.
>
>
>"Kyle" <anonymous@discussions.microsoft.com> wrote in
message
>news:17f601c46f5b$98508f60$a401280a@phx.gbl...
>> I just setup a new computer. Gigabyte K8N Pro, and 2
>> Western Digital 80g SATA Harddrives. I intended to run
>> those drives in RAID 0. I setup the BIOS, and had
>> everything recognizing the array. Then, I tried to
install
>> Windows XP Pro. At the begining of the install, a gray
bar
>> appears at the bottom of the screen. "Press F6 if you
need
>> to install 3rd party RAID SCSI drivers." Or somthing
like
>> that. I press F6, but the installation continues on
like I
>> didn't even press it. The keyboard is fine, because I
can
>> get into the next option by pressing F2. Any ideas?.....
>> Please?....... Thanks, -Kyle
>
>
>.
>
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

When you press F6, nothing happens at that time. Windows will continue
installing and when it comes to installing the SATA drivers, it will go
ahead and do so if the floppy disk is in that they are on. You see the
floppy drive light come on and here it. If floppy not in at the time, when
it comes time it will prompt you for it.

If this don't happen, then follow the other Poster's reply about the F-Lock.

"Kyle" <anonymous@discussions.microsoft.com> wrote in message
news:17f601c46f5b$98508f60$a401280a@phx.gbl...
> I just setup a new computer. Gigabyte K8N Pro, and 2
> Western Digital 80g SATA Harddrives. I intended to run
> those drives in RAID 0. I setup the BIOS, and had
> everything recognizing the array. Then, I tried to install
> Windows XP Pro. At the begining of the install, a gray bar
> appears at the bottom of the screen. "Press F6 if you need
> to install 3rd party RAID SCSI drivers." Or somthing like
> that. I press F6, but the installation continues on like I
> didn't even press it. The keyboard is fine, because I can
> get into the next option by pressing F2. Any ideas?.....
> Please?....... Thanks, -Kyle
 

dl

Distinguished
Apr 2, 2004
1,126
0
19,280
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

If you hit F6 you will be prompted to insert the floppy

"Ed." <ejs@none.net> wrote in message
news:u5OZIp2bEHA.1408@TK2MSFTNGP12.phx.gbl...
> When you press F6, nothing happens at that time. Windows will continue
> installing and when it comes to installing the SATA drivers, it will go
> ahead and do so if the floppy disk is in that they are on. You see the
> floppy drive light come on and here it. If floppy not in at the time, when
> it comes time it will prompt you for it.
>
> If this don't happen, then follow the other Poster's reply about the
F-Lock.
>
> "Kyle" <anonymous@discussions.microsoft.com> wrote in message
> news:17f601c46f5b$98508f60$a401280a@phx.gbl...
> > I just setup a new computer. Gigabyte K8N Pro, and 2
> > Western Digital 80g SATA Harddrives. I intended to run
> > those drives in RAID 0. I setup the BIOS, and had
> > everything recognizing the array. Then, I tried to install
> > Windows XP Pro. At the begining of the install, a gray bar
> > appears at the bottom of the screen. "Press F6 if you need
> > to install 3rd party RAID SCSI drivers." Or somthing like
> > that. I press F6, but the installation continues on like I
> > didn't even press it. The keyboard is fine, because I can
> > get into the next option by pressing F2. Any ideas?.....
> > Please?....... Thanks, -Kyle
>
>
 
G

Guest

Guest
Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Do note that wireless keyboards will not work outside of Windows. You
will need a wired keyboard and you need to start pressing F6 as soon as
the option appears. You may need to enable USB Keyboard support if it
is a USB Keyboard. This may be a setting in your BIOS. PS/2 Keyboards
should work just fine. One way to test it is if your keyboard has a
light for num locks, see if you can change the light on and off by
pressing the num locks key ;)

----
Nathan McNulty

DL wrote:
> If you hit F6 you will be prompted to insert the floppy
>
> "Ed." <ejs@none.net> wrote in message
> news:u5OZIp2bEHA.1408@TK2MSFTNGP12.phx.gbl...
>
>>When you press F6, nothing happens at that time. Windows will continue
>>installing and when it comes to installing the SATA drivers, it will go
>>ahead and do so if the floppy disk is in that they are on. You see the
>>floppy drive light come on and here it. If floppy not in at the time, when
>>it comes time it will prompt you for it.
>>
>>If this don't happen, then follow the other Poster's reply about the
>
> F-Lock.
>
>>"Kyle" <anonymous@discussions.microsoft.com> wrote in message
>>news:17f601c46f5b$98508f60$a401280a@phx.gbl...
>>
>>>I just setup a new computer. Gigabyte K8N Pro, and 2
>>>Western Digital 80g SATA Harddrives. I intended to run
>>>those drives in RAID 0. I setup the BIOS, and had
>>>everything recognizing the array. Then, I tried to install
>>>Windows XP Pro. At the begining of the install, a gray bar
>>>appears at the bottom of the screen. "Press F6 if you need
>>>to install 3rd party RAID SCSI drivers." Or somthing like
>>>that. I press F6, but the installation continues on like I
>>>didn't even press it. The keyboard is fine, because I can
>>>get into the next option by pressing F2. Any ideas?.....
>>>Please?....... Thanks, -Kyle
>>
>>
>
>