vcore on sempron/asus

Archived from groups: alt.comp.hardware.pc-homebuilt,alt.comp.periphs.mainboard.asus (More info?)

Hello,

I put a Sempron 2400 on an ASUS A7V600-X with 256 of PC2700. It initially
booted at 1333/33 so I set it manually to 1667/33. I see also that it wants
to auto set the vcore as 1.6 although I thought this was to be at 1.65.

Should I manually set the vcore to 1.65 or leave it alone?




Thankyaverymuch...

Archived from groups: alt.comp.hardware.pc-homebuilt,alt.comp.periphs.mainboard.asus (More info?)

"Ed" <nomail@hotmail.com> wrote in message
news:hrtt415a5m6srrsrtqrpc9hh6ru6420tq0@4ax.com...
> On Sat, 2 Apr 2005 09:34:31 -0500, "Jess Fertudei"
> <not@this.juncture.com> wrote:
>
> >Hello,
> >
> >I put a Sempron 2400 on an ASUS A7V600-X with 256 of PC2700. It initially
> >booted at 1333/33 so I set it manually to 1667/33. I see also that it
wants
> >to auto set the vcore as 1.6 although I thought this was to be at 1.65.
> >
> >Should I manually set the vcore to 1.65 or leave it alone?
> >
> >
> >
> >
> >Thankyaverymuch...
> >
>
> The "SDA2400DUT3D" (2400+) uses 1.60V.
>
>
http://139.95.253.213/SRVS/CGI-BIN [...] =obj(5080)
>
>

Seems that link isn't working the last few hours and the 'knowledge server'
is down too... but I'll take your word on it. When I bought it (newegg) it
said 1.65 as did any of the sites I compared it with <shrug>. SEMPRON
2400BOX


Thanks!

Archived from groups: alt.comp.hardware.pc-homebuilt,alt.comp.periphs.mainboard.asus (More info?)

That certainly is a good page, thanks,


I wonder why so many of the places I compared them at had them listed
incorrectly as 1.65? Belarc Advisor sees it as an XP2400+ and that shows on
your list as both 1.6 or as a 1.65 as well... but only the one for Sempron
stickered one. <shrug>



Anyhow... thanks again.



"Rob Stow" <rob.stow.nospam@shaw.ca> wrote in message
news:Q9M3e.886043$6l.218493@pd7tw2no...
> Jess Fertudei wrote:
> > "Ed" <nomail@hotmail.com> wrote in message
> > news:hrtt415a5m6srrsrtqrpc9hh6ru6420tq0@4ax.com...
> >
> >>On Sat, 2 Apr 2005 09:34:31 -0500, "Jess Fertudei"
> >><not@this.juncture.com> wrote:
> >>
> >>
> >>>Hello,
> >>>
> >>>I put a Sempron 2400 on an ASUS A7V600-X with 256 of PC2700. It
initially
> >>>booted at 1333/33 so I set it manually to 1667/33. I see also that it
> >
> > wants
> >
> >>>to auto set the vcore as 1.6 although I thought this was to be at 1.65.
> >>>
> >>>Should I manually set the vcore to 1.65 or leave it alone?
> >>>
> >>>
> >>>
> >>>
> >>>Thankyaverymuch...
> >>>
> >>
> >>The "SDA2400DUT3D" (2400+) uses 1.60V.
> >>
> >>
> >
> >
http://139.95.253.213/SRVS/CGI-BIN [...] =obj(5080)
> >
> >>
> >
> > Seems that link isn't working the last few hours and the 'knowledge
server'
> > is down too... but I'll take your word on it. When I bought it (newegg)
it
> > said 1.65 as did any of the sites I compared it with <shrug>. SEMPRON
> > 2400BOX
> >
> >
>
> A great place to look up basic CPU electrical and thermal specs:
> http://users.erols.com/chare/elec.htm