Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
Ok Guys, I'm still not able to get the two sets of memory (see below) to work together. Can ne1 tell me
if they should/shouldn't work together? when I put the two 512mb sticks in A1 and B1 and the 256mb
sticks in A2 and B2 I only get 512mb's of ram showing up instead of 1.5gb. The same thing happens if
I reverse the sticks...smaller sticks in A1 and B1. I've used all different BIOS versions upto 1006. Any help
here would be appreaciate. Thanks all. Ed
> I have a set of Corsair Value Select 1GB (2x512) DDR400 PC3200 Memory
Modules installed in my system (slots a1 and b1).
> here are the specs:
> Model: VS1GBKIT400
> Speed: DDR400(PC3200)
> Type: 184 Pin DDR SDRAM
> Error Checking: Non-ECC
> Registered/Unbuffered: Unbuffered
> Cas Latency: 2.5
> Support Voltage: 2.5V
> Bandwidth: 3.2GB/s
> Organization: two 64M x 64 -Bit
>
> I also have a pair of Corsair XMS Extreme Memory Speed Series,
> Low Latency (Twin Pack) 184 Pin 512MB(256MBx2) DDR PC-3200 That I am trying to
> add to the system in the other two slots. here are their specs:
>
> 512MB XMS Corsair Memory Specifications:
> Manufacturer: Corsair
> Speed: DDR400(PC3200)
> Type: 184 Pin DDR SDRAM
> Error Checking: Non-ECC
> Registered/Unbuffered: Unbuffered
> Cas Latency: 2-3-2-6
> Support Voltage: 2.6V
> Bandwidth: 3.2GB/s
> Organization: two 32M x 64 -Bit
> Special Features: Plug-n-Frag Auto-Configuration
>
> Asus documentation says both sets of memory are supported, however I'm
not sure if they will work
> together to eqaul 1.5gb's. I've had no luck, so I'm assuming they
won't. Asus Doc's are a little confusing
> too me, so I thought I would ask here. Thanks all!
>
> EA
Ok Guys, I'm still not able to get the two sets of memory (see below) to work together. Can ne1 tell me
if they should/shouldn't work together? when I put the two 512mb sticks in A1 and B1 and the 256mb
sticks in A2 and B2 I only get 512mb's of ram showing up instead of 1.5gb. The same thing happens if
I reverse the sticks...smaller sticks in A1 and B1. I've used all different BIOS versions upto 1006. Any help
here would be appreaciate. Thanks all. Ed
> I have a set of Corsair Value Select 1GB (2x512) DDR400 PC3200 Memory
Modules installed in my system (slots a1 and b1).
> here are the specs:
> Model: VS1GBKIT400
> Speed: DDR400(PC3200)
> Type: 184 Pin DDR SDRAM
> Error Checking: Non-ECC
> Registered/Unbuffered: Unbuffered
> Cas Latency: 2.5
> Support Voltage: 2.5V
> Bandwidth: 3.2GB/s
> Organization: two 64M x 64 -Bit
>
> I also have a pair of Corsair XMS Extreme Memory Speed Series,
> Low Latency (Twin Pack) 184 Pin 512MB(256MBx2) DDR PC-3200 That I am trying to
> add to the system in the other two slots. here are their specs:
>
> 512MB XMS Corsair Memory Specifications:
> Manufacturer: Corsair
> Speed: DDR400(PC3200)
> Type: 184 Pin DDR SDRAM
> Error Checking: Non-ECC
> Registered/Unbuffered: Unbuffered
> Cas Latency: 2-3-2-6
> Support Voltage: 2.6V
> Bandwidth: 3.2GB/s
> Organization: two 32M x 64 -Bit
> Special Features: Plug-n-Frag Auto-Configuration
>
> Asus documentation says both sets of memory are supported, however I'm
not sure if they will work
> together to eqaul 1.5gb's. I've had no luck, so I'm assuming they
won't. Asus Doc's are a little confusing
> too me, so I thought I would ask here. Thanks all!
>
> EA