Tom's Hardware > Forum > Motherboards & Memory > Asus > Marvell vct not working

Marvell vct not working

Forum Motherboards & Memory : Asus - Marvell vct not working

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Anonymous   05-30-2005 at 06:34:32 PM

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

i have an asus k8v-x motherboard with a built in Marvell 88E8001GbLAN
chip. The specs on the asus site says that the mobo supports the
virtual cable tester. But when i lauched the exe it won't allow to run
it. The "run" button is greyed out or lock or something. Should i
contact asus or the store where i bought the mobo from or is this a
software problem?

Add a reply
Sponsored Links
Register or log in to remove.
PB   05-31-2005 at 09:21:23 AM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

You must not be connected to a hub or other device that makes the link
active. The DSP must not be active for the test to work. The VCT help
file describes the resultant diagnostic messages after you run the utility.


PB

Brandon wrote:
> i have an asus k8v-x motherboard with a built in Marvell 88E8001GbLAN
> chip. The specs on the asus site says that the mobo supports the
> virtual cable tester. But when i lauched the exe it won't allow to run
> it. The "run" button is greyed out or lock or something. Should i
> contact asus or the store where i bought the mobo from or is this a
> software problem?
>

Reply to PB
Paul   05-31-2005 at 06:35:45 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

In article <1117481671.963113.184080@o13g2000cwo.googlegroups.com>,
"Brandon" <trinimondem@gmail.com> wrote:

> i have an asus k8v-x motherboard with a built in Marvell 88E8001GbLAN
> chip. The specs on the asus site says that the mobo supports the
> virtual cable tester. But when i lauched the exe it won't allow to run
> it. The "run" button is greyed out or lock or something. Should i
> contact asus or the store where i bought the mobo from or is this a
> software problem?

Does VCT need some driver to be installed first ?

Paul

Reply to Paul
Anonymous   05-31-2005 at 08:03:08 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

I am connected to a hub, and i am sure the hub is working because i get
a ip address from it. But its only a 10base hub, does that matter?

Reply to Anonymous
Anonymous   05-31-2005 at 08:04:23 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

Paul wrote:
> In article <1117481671.963113.184080@o13g2000cwo.googlegroups.com>,
> "Brandon" <trinimondem@gmail.com> wrote:
>
> > i have an asus k8v-x motherboard with a built in Marvell 88E8001GbLAN
> > chip. The specs on the asus site says that the mobo supports the
> > virtual cable tester. But when i lauched the exe it won't allow to run
> > it. The "run" button is greyed out or lock or something. Should i
> > contact asus or the store where i bought the mobo from or is this a
> > software problem?
>
> Does VCT need some driver to be installed first ?
>
> Paul

Yes it does, but i alrady installed the drivers. In fact the VCT
software i am using came with the drivers that i downloaded from asus
website.

Reply to Anonymous
Anonymous   05-31-2005 at 09:01:44 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

I am connected to a hub, and i am sure the hub is working because i get
a ip address from it. But its only a 10base hub, does that matter?

Reply to Anonymous
Anonymous   05-31-2005 at 09:23:53 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

thanks alot this fixed the problem

Reply to Anonymous
Anonymous   05-31-2005 at 09:26:39 PM
- 0 +

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

 

i disconnected the calbe from my hub and then i laucnhed the calbe
tester and i was able to test it perfectly.

Reply to Anonymous
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > Asus > Marvell vct not working
Go to:

There are 493 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.225 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them
  • 13:08 OvrClkr won the Overclocking badge
  • 01:00 vianescute won the Freshman badge
  • 01:00 meywd won the Freshman badge
  • 01:00 nayega won the Freshman badge
  • 01:00 gpfear won the Freshman badge
  • 01:00 Conrad925 won the Freshman badge
  • 01:00 skythra won the Freshman badge
  • 01:00 Ckaz won the Freshman badge
  • 01:00 james59 won the Uniformed badge
  • 01:00 snarl won the Uniformed badge