Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
ok im really hoping someone can help me out here, ive got a P4T533
motherboard, i just tried updating the bios with Asus EZ Flash, it wiped
the bios, went to install the new bios and failed, went to install old
bios and my comp crashed, yeah comp wont load
ive got my system setup to read from the IDE first for faster bootup,
tried to create a system disk with awdflash and bios version 1006, but
nothing happens
when i boot the comp, whether with or without floppy inserted, i dont
get any info on the monitor, no flash/start up screen
ive tried to take the power lead out and battery, hoping it would reset
the bootup sequence (not sure if this is possible without a bios)
can anyone suggest anything else i can try?
if i removed all IDE cables from the mobo would that force it to check
alternative devices?
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
If that board has "crashfree bios 2" It should be giving you a message: Bad
bios checksum. Starting bios recovery. Then it will search for the bios
first on a floppy then automatically go to the CD if it can't find a floppy
"Drago" <drago.alt.cracks@gmail.com> wrote in message
news:1117920713.35803.0@doris.uk.clara.net...
> ok im really hoping someone can help me out here, ive got a P4T533
> motherboard, i just tried updating the bios with Asus EZ Flash, it wiped
> the bios, went to install the new bios and failed, went to install old
> bios and my comp crashed, yeah comp wont load
>
> ive got my system setup to read from the IDE first for faster bootup,
> tried to create a system disk with awdflash and bios version 1006, but
> nothing happens
>
> when i boot the comp, whether with or without floppy inserted, i dont get
> any info on the monitor, no flash/start up screen
>
> ive tried to take the power lead out and battery, hoping it would reset
> the bootup sequence (not sure if this is possible without a bios)
>
> can anyone suggest anything else i can try?
>
> if i removed all IDE cables from the mobo would that force it to check
> alternative devices?
>
> any and all help appreciated
> TIA
>
> oh im using win xp pro
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
Sorry to say, but your sole solution is to buy a new motherboard.
--
DaveW
"Drago" <drago.alt.cracks@gmail.com> wrote in message
news:1117920713.35803.0@doris.uk.clara.net...
> ok im really hoping someone can help me out here, ive got a P4T533
> motherboard, i just tried updating the bios with Asus EZ Flash, it wiped
> the bios, went to install the new bios and failed, went to install old
> bios and my comp crashed, yeah comp wont load
>
> ive got my system setup to read from the IDE first for faster bootup,
> tried to create a system disk with awdflash and bios version 1006, but
> nothing happens
>
> when i boot the comp, whether with or without floppy inserted, i dont get
> any info on the monitor, no flash/start up screen
>
> ive tried to take the power lead out and battery, hoping it would reset
> the bootup sequence (not sure if this is possible without a bios)
>
> can anyone suggest anything else i can try?
>
> if i removed all IDE cables from the mobo would that force it to check
> alternative devices?
>
> any and all help appreciated
> TIA
>
> oh im using win xp pro
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
In article <neCdnQlsI8irqj_fRVn-uA@comcast.com>, "DaveW" <none@zero.org> wrote:
> Sorry to say, but your sole solution is to buy a new motherboard.
Nothing so dramatic, Dave.
A trip to badflash.com plus $25 will fix it up. May take a couple
days to get a new flash chip, then it will be all fixed. Just be
careful to indicate the exact motherboard model number and the
BIOS revision you want in the new flash chip.
If the flash chip was soldered to the motherboard, I might agree with
you. As long as it is socketed (and most are), it is easy to replace.
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
>If that board has "crashfree bios 2" It should be giving you a message: Bad
>bios checksum. Starting bios recovery. Then it will search for the bios
>first on a floppy then automatically go to the CD if it can't find a floppy
I have this board as well and no it is pre crash free bios
--
ASUS A8V/Athlon FX-55
ATI RADEON X800XT PE
1GB OCZ Gold Edition Rev3 DDR PC-3700
Using this batch file as "autoexec.bat," one could create a DOS
bootable floppy and then use that as an image for making a bootable CD
(with Nero or Roxio on another computer.) It's possible that such a
bootable CD might get the computer going and reflash the hosed BIOS.
In other words, there seem to be several things to try before buying a
new motherboard.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.