A8V deluxe Rev.2

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I just upgrade to the new bios 1013, in the hardware monitor, the vcore
voltage default is now 1.8 V in red, instead of 1.5 V we had before with
the orthers versions. ex: bios 1012,1010,1008 etc.
Do we have to change to ignore ?
I do not find any reports or advise for that bios change.

Thanks for your support.
JC
erase NOSpam- from my email address.

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

U¿ytkownik "Jeannot" <NoSpam-ordijc@gmail.com> napisa³ w wiadomo¶ci
news:8jYqe.14931$Es6.98867@wagner.videotron.net...
>I just upgrade to the new bios 1013, in the hardware monitor, the vcore
>voltage default is now 1.8 V in red, instead of 1.5 V we had before with
>the orthers versions. ex: bios 1012,1010,1008 etc.
> Do we have to change to ignore ?
> I do not find any reports or advise for that bios change.
>
> Thanks for your support.
> JC
> erase NOSpam- from my email address.
>

1. upgrade bios to 1013
2. clear cmos (jumper in matherboard) !!!



JvP

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

U¿ytkownik "Zeneca" <jl.garate@euskalnet.net> napisa³ w wiadomo¶ci
news8jocc$di71@eui1nw.euskaltel.es...
> ClearCMOS is almost mandatory after a BIOS flash, because it will avoid
> weird behaviour after.
software clear little inefficacious, > look athlon64 bios seting Vcore= 1.8V
!!!

my asus a8v identically seting Vcore after flash 1013 bios,
temperature fastly up 75C !!!
im hardawe jumper reset, matherboard seting Vcore goods.


JvP