A7V333, Promise Controller - drive write error messages so..

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

I have a Master/Slave setup for IDE0 with two hard drives, and a CD-R/W and
a DVD-R/W as 2ndary Master/Slave,

On the Promise Controller as 1+0 RAID (i.e. as a third hard drive) I have a
200 Gb Seagate ATA 100. For some reason I get write Errors sometimes after
the system has been sitting for a while. Any suggestions would be
appreciated.

ASUS A7V333 Rev 1.02, BIOS 1017

Primary Master: WD 1200JB (120 Gb ATA133)

Primary Slave: Maxtor 4K080HA (80 Gb ATA133 or 100, not sure)

Secondary Master: Sony CD-RW CRX215E1

Secondary Slave: NEC DVD_RW ND-2500A

420W P/S (high quality)

Windows XP Pro, SP2, with (most) all latest patches (v.2055)

AMD Athlon XP 2100+

512 MB DDR 3200

Drive on Promise Controller: 1+0 Stripe/RAID0 SCSI Disk Device; Driver
Provider: Microsoft, Driver Date 7/1/2001 Driver version 5.1.2535

=======

SCSI and RAID controllers: Promise Technology WinXP Promise MBFastTrack133
Lite (tm) Controller; Driver Provider: Promise Technology Driver date
11/21/2001, Driver version 2.0.0.21

============ Error messages:

Faulting application mmc.exe, version 5.1.2600.2055, faulting module
ntdll.dll, version 5.1.2600.2055, fault address 0x00011e77.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Viewer: Application: Source Application Error, Event Id 1000

----------- ----------------

Fault bucket 81990110.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Event Viewer: Application: Source Application Error, Event Id 1001

----------- ----------------

An error was detected on device \Device\Harddisk2\D during a paging
operation.

Event Viewer: System(here below): Event ID 51 Source disk

----------- ----------------

The system failed to flush data to the transaction log. Corruption may
occur.

Event ID 57 Source Ftdisk

----------- ----------------

{Delayed Write Failed} Windows was unable to save all the data for the file
.. The data has been lost. This error may be caused by a failure of your
computer hardware or network connection. Please try to save this file
elsewhere.

Event ID 50 Source Ntfs

----------- ----------------

Application popup: Windows - Delayed Write Failed : Windows was unable to
save all the data for the file I:\$Mft. The data has been lost. This error
may be caused by a failure of your computer hardware or network connection.
Please try to save this file elsewhere.

Event ID 26 Source Application PopUp

--
KWW