Upgrade an Existing Motherboard

[Oz]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I want to upgrade my existing motherboard adn CPU. I am
running XP Pro SP2. Please advise if you can help me.

 

[Jerry]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Help you do what? You're on your own swapping out motherboards - we are not
going to do it for you.

"Oz" <ozhanakman@comcast.net> wrote in message
news:08fb01c4987c$846cb560$a501280a@phx.gbl...
>I want to upgrade my existing motherboard adn CPU. I am
> running XP Pro SP2. Please advise if you can help me.
>

 

[Oz]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

I know that much. I was wondering if XP Pro would
recognize new motherboard and CPU.
>-----Original Message-----
>Help you do what? You're on your own swapping out
motherboards - we are not
>going to do it for you.
>
>"Oz" <ozhanakman@comcast.net> wrote in message
>news:08fb01c4987c$846cb560$a501280a@phx.gbl...
>>I want to upgrade my existing motherboard adn CPU. I am
>> running XP Pro SP2. Please advise if you can help me.
>>
>
>
>.
>

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Oz wrote:

> I know that much. I was wondering if XP Pro would
> recognize new motherboard and CPU.
>

It might and then it might not. First, how much difference
is there between the old system and the new system? Next,
how much do you know about repairing XP installations? In
the end, it might be better backup the HD, install the new
motherboard and CPU, and then wipe the HD and do a clean
install of Windows XP.

 

[Guest]

Archived from groups: microsoft.public.windowsxp.hardware (More info?)

Oz wrote:
> I want to upgrade my existing motherboard adn CPU. I am
> running XP Pro SP2. Please advise if you can help me.


Normally, and assuming a retail license (many OEM installations
and licenses are not transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the
one on which the WinXP installation was originally performed, you'll
need to perform a repair (a.k.a. in-place upgrade) installation, at
the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more
than 120 days since you last activated that specific Product Key,
you'll most likely be able to activate via the internet without
problem. If it's been less, you might have to make a 5 minute phone
call.

--

Bruce Chambers

Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on
having both at once. - RAH