Help! - Problem with Lexmark Z11

Archived from groups: comp.periphs.printers (More info?)

On Wed, 2 Jun 2004 18:42:51 +0100, "Jasper Coggins"
<mattkilfeather@onetel.com> wrote:

>Hi,
>
>I have a Z11 with a colour cartridge. I downloaded the system driver for
>Windows XP from Lexmark and the test page printed reasonably okay.
>
>However when I load up a black ink cartridge I get white horizontal lines
>through the printed text.
>
>I have selected the correct cartridge in the driver, I have done the
>alignment (which looks fine) and cleaned the nozzles several times from
>software(the diagonal line looks fine). I have even changed the black ink
>cartridge.
>
>But each time I do a Windows test print I get the white lines!
>
>When I do the hardware test I get a solid black bar printed.
>
>Any ideas?
>
>Thanks.
>


It sounds like the printer circuitboard is starting to fail since you
put in a new cartridge and it acts like clogged nozzles..

Ive owned a z11 forever and constantly refilled it and got a long life
out of a printhead.. that was a several years ago...

Not to be a wiseguy or anything, but the best fix would be a canon "I"
series model which would be close to the cost of 2 new lexmark
cartridges.... It would be worth every penny and more. Especially
when it holds nearly 3 times the ink and the cost of refilling the
complete set yourself is about 3 dollars in good quality ink.