Archived from groups: comp.periphs.printers (More info?)
For the last few months I've been getting a weird intermittent problem on my
700. Paper size is set to A4 portrait and printing begins fine, but about a
quarter of the way down the page the printer pauses, then feeds another
sheet and resumes where it left off at the top of the second sheet. One A4
page can be spread over three or four sheets of paper.
This occurs under all software applications, but the Windows Test Page
prints just fine. Anyone any idea what's happening and how to fix it?
Archived from groups: comp.periphs.printers (More info?)
Mick Tilley wrote:
> For the last few months I've been getting a weird intermittent problem on my
> 700. Paper size is set to A4 portrait and printing begins fine, but about a
> quarter of the way down the page the printer pauses, then feeds another
> sheet and resumes where it left off at the top of the second sheet. One A4
> page can be spread over three or four sheets of paper.
>
> This occurs under all software applications, but the Windows Test Page
> prints just fine. Anyone any idea what's happening and how to fix it?
>
> TIA
>
> Mick
>
>
All I can suggest is that you contact Epson. They were quick to respond to my
queries when I was looking for colour profiles for my Epson Photo 700.
--
Ben Thomas
Apparently less than 10% of accidents are caused by drivers exceeding the speed
limit.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.