Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Brand new setup, everything else works just as it should both mainboard and
Cbox3. Think I might have a defective handigator. There is a red light on
the remote which I'm assuming should light up if operational. Mine will not
light at all. Put new batteries in just to be sure and still nothing.

Any input, suggestions would be greatly appreciated!!

Jeff

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

forget the red light it does nothing


you have to connect the WOL lead and activate it in the bios before the
remote will work!

HTH


"jlcarriere" <jlcarriere@charter.net> wrote in message
news:a%CJd.6867$bw7.4299@fe03.lga...
> Brand new setup, everything else works just as it should both mainboard
and
> Cbox3. Think I might have a defective handigator. There is a red light
on
> the remote which I'm assuming should light up if operational. Mine will
not
> light at all. Put new batteries in just to be sure and still nothing.
>
> Any input, suggestions would be greatly appreciated!!
>
> Jeff
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Thanks a million dude. Funny it doesn't mention that very important detail
in any of there manuals. Infact, thats flippin lame.

That is the only thing I haven't connected.
Thanks again, HTH

Jeff


"Ginchy" <avmaster@BBBBbtinternet.com> wrote in message
news:ct8342$pek$1@sparta.btinternet.com...
> forget the red light it does nothing
>
>
> you have to connect the WOL lead and activate it in the bios before the
> remote will work!
>
> HTH
>
>
> "jlcarriere" <jlcarriere@charter.net> wrote in message
> news:a%CJd.6867$bw7.4299@fe03.lga...
>> Brand new setup, everything else works just as it should both mainboard
> and
>> Cbox3. Think I might have a defective handigator. There is a red light
> on
>> the remote which I'm assuming should light up if operational. Mine will
> not
>> light at all. Put new batteries in just to be sure and still nothing.
>>
>> Any input, suggestions would be greatly appreciated!!
>>
>> Jeff
>>
>>
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

When I got my board a year ago I had to write to them and they told me. They
then put it in the FAQ on the board but then removed it again????


"jlcarriere" <jlcarriere@charter.net> wrote in message
news:uvPJd.8553$p12.6923@fe03.lga...
> Thanks a million dude. Funny it doesn't mention that very important
detail
> in any of there manuals. Infact, thats flippin lame.
>
> That is the only thing I haven't connected.
> Thanks again, HTH
>
> Jeff
>
>
> "Ginchy" <avmaster@BBBBbtinternet.com> wrote in message
> news:ct8342$pek$1@sparta.btinternet.com...
> > forget the red light it does nothing
> >
> >
> > you have to connect the WOL lead and activate it in the bios before the
> > remote will work!
> >
> > HTH
> >
> >
> > "jlcarriere" <jlcarriere@charter.net> wrote in message
> > news:a%CJd.6867$bw7.4299@fe03.lga...
> >> Brand new setup, everything else works just as it should both mainboard
> > and
> >> Cbox3. Think I might have a defective handigator. There is a red
light
> > on
> >> the remote which I'm assuming should light up if operational. Mine
will
> > not
> >> light at all. Put new batteries in just to be sure and still nothing.
> >>
> >> Any input, suggestions would be greatly appreciated!!
> >>
> >> Jeff
> >>
> >>
> >
> >
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Hi!
Does you card reader work?
My handigator works fine but can't access SM memory card (WinXP pro)

"jlcarriere" <jlcarriere@charter.net> wrote in message
news:a%CJd.6867$bw7.4299@fe03.lga...
> Brand new setup, everything else works just as it should both mainboard
and
> Cbox3. Think I might have a defective handigator. There is a red light
on
> the remote which I'm assuming should light up if operational. Mine will
not
> light at all. Put new batteries in just to be sure and still nothing.
>
> Any input, suggestions would be greatly appreciated!!
>
> Jeff
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

My card reader works great, but I've only used it with my SD card, Haven't
used the SM reader. Does the SM show up in "My Computer" as a removeable
drive? I know I see all the the different card readers in MY COMPUTER..


"DigiSign" <ds@carnet.hr> wrote in message
news:ctikms$n7a$1@garrison.globalnet.hr...
> Hi!
> Does you card reader work?
> My handigator works fine but can't access SM memory card (WinXP pro)
>
> "jlcarriere" <jlcarriere@charter.net> wrote in message
> news:a%CJd.6867$bw7.4299@fe03.lga...
>> Brand new setup, everything else works just as it should both mainboard
> and
>> Cbox3. Think I might have a defective handigator. There is a red light
> on
>> the remote which I'm assuming should light up if operational. Mine will
> not
>> light at all. Put new batteries in just to be sure and still nothing.
>>
>> Any input, suggestions would be greatly appreciated!!
>>
>> Jeff
>>
>>
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Can't see none of them! When I tried to instal drivers for CBox my system
says that it's an XP system wich needs no other drivers for card reader?!

"jlcarriere" <jlcarriere@charter.net> wrote in message
news:j5XLd.2029$aX2.415@fe03.lga...
> My card reader works great, but I've only used it with my SD card, Haven't
> used the SM reader. Does the SM show up in "My Computer" as a removeable
> drive? I know I see all the the different card readers in MY COMPUTER..
>
>
> "DigiSign" <ds@carnet.hr> wrote in message
> news:ctikms$n7a$1@garrison.globalnet.hr...
> > Hi!
> > Does you card reader work?
> > My handigator works fine but can't access SM memory card (WinXP pro)
> >
> > "jlcarriere" <jlcarriere@charter.net> wrote in message
> > news:a%CJd.6867$bw7.4299@fe03.lga...
> >> Brand new setup, everything else works just as it should both mainboard
> > and
> >> Cbox3. Think I might have a defective handigator. There is a red
light
> > on
> >> the remote which I'm assuming should light up if operational. Mine
will
> > not
> >> light at all. Put new batteries in just to be sure and still nothing.
> >>
> >> Any input, suggestions would be greatly appreciated!!
> >>
> >> Jeff
> >>
> >>
> >
> >
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

My XP system said the same thing, however, I installed them anyway and it
worked like a charm. Give it a shot. It will be worth it if it to get your
card readers to work.

I did notice that the card readers use one of the USB headers as the way to
move data from the card reader. I think the confusion comes from XP doesn't
need the driver to activate the USB header, but does need the other drivers
for all the different card readers.

My card readers shows up in XP as removeable drives with a red dot next to
the drive. Also gives the different type of reader SD, SM, ect.

Let me know if it works

Jeff


"DigiSign" <ds@carnet.hr> wrote in message
news:ctrcre$9cb$1@garrison.globalnet.hr...
> Can't see none of them! When I tried to instal drivers for CBox my system
> says that it's an XP system wich needs no other drivers for card reader?!
>
> "jlcarriere" <jlcarriere@charter.net> wrote in message
> news:j5XLd.2029$aX2.415@fe03.lga...
>> My card reader works great, but I've only used it with my SD card,
>> Haven't
>> used the SM reader. Does the SM show up in "My Computer" as a removeable
>> drive? I know I see all the the different card readers in MY COMPUTER..
>>
>>
>> "DigiSign" <ds@carnet.hr> wrote in message
>> news:ctikms$n7a$1@garrison.globalnet.hr...
>> > Hi!
>> > Does you card reader work?
>> > My handigator works fine but can't access SM memory card (WinXP pro)
>> >
>> > "jlcarriere" <jlcarriere@charter.net> wrote in message
>> > news:a%CJd.6867$bw7.4299@fe03.lga...
>> >> Brand new setup, everything else works just as it should both
>> >> mainboard
>> > and
>> >> Cbox3. Think I might have a defective handigator. There is a red
> light
>> > on
>> >> the remote which I'm assuming should light up if operational. Mine
> will
>> > not
>> >> light at all. Put new batteries in just to be sure and still nothing.
>> >>
>> >> Any input, suggestions would be greatly appreciated!!
>> >>
>> >> Jeff
>> >>
>> >>
>> >
>> >
>>
>>
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Hello again!

Tried via "Add new hardware" - system found nothing!
Started "Setup" from CBox3_v1.8b, got Disk monitor installed wich through
"Force refresh" showed nothing new!
Can you please describe how you succeede to install yours?

"jlcarriere" <jlcarriere@charter.net> wrote in message
news:QrsMd.7540$Pd5.6315@fe03.lga...
> My XP system said the same thing, however, I installed them anyway and it
> worked like a charm. Give it a shot. It will be worth it if it to get
your
> card readers to work.
>
> I did notice that the card readers use one of the USB headers as the way
to
> move data from the card reader. I think the confusion comes from XP
doesn't
> need the driver to activate the USB header, but does need the other
drivers
> for all the different card readers.
>
> My card readers shows up in XP as removeable drives with a red dot next to
> the drive. Also gives the different type of reader SD, SM, ect.
>
> Let me know if it works
>
> Jeff
>
>
> "DigiSign" <ds@carnet.hr> wrote in message
> news:ctrcre$9cb$1@garrison.globalnet.hr...
> > Can't see none of them! When I tried to instal drivers for CBox my
system
> > says that it's an XP system wich needs no other drivers for card
reader?!
> >
> > "jlcarriere" <jlcarriere@charter.net> wrote in message
> > news:j5XLd.2029$aX2.415@fe03.lga...
> >> My card reader works great, but I've only used it with my SD card,
> >> Haven't
> >> used the SM reader. Does the SM show up in "My Computer" as a
removeable
> >> drive? I know I see all the the different card readers in MY
COMPUTER..
> >>
> >>
> >> "DigiSign" <ds@carnet.hr> wrote in message
> >> news:ctikms$n7a$1@garrison.globalnet.hr...
> >> > Hi!
> >> > Does you card reader work?
> >> > My handigator works fine but can't access SM memory card (WinXP pro)
> >> >
> >> > "jlcarriere" <jlcarriere@charter.net> wrote in message
> >> > news:a%CJd.6867$bw7.4299@fe03.lga...
> >> >> Brand new setup, everything else works just as it should both
> >> >> mainboard
> >> > and
> >> >> Cbox3. Think I might have a defective handigator. There is a red
> > light
> >> > on
> >> >> the remote which I'm assuming should light up if operational. Mine
> > will
> >> > not
> >> >> light at all. Put new batteries in just to be sure and still
nothing.
> >> >>
> >> >> Any input, suggestions would be greatly appreciated!!
> >> >>
> >> >> Jeff
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

YES I CONNECTED THE WOL LEAD INTO THE CBOX AND SINCE I PUT THE NEW
CBOX I JUS GOT THE REMOTE WILL TURN THE COMPUTER ON BUT WONT DO
ANYTHING ELSE.... :?

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Same problem that I have for months - Still no solution!!
Years ago I had an ASUS P2BF MoBo with 2 USB connectors on the back but only
one was capable to deliver power for connected devices at the same time wich
was, as you can guess, specified nowhere. Is it possible it's the same
problem here (if you connect USB's on the rear bracket and those on the
CBox, there's not enough power to drive 'em all?)

Davor

"ACHILLES" <KAIZARSOLZA@AOL-dot-COM.no-spam.invalid> wrote in message
news:774bd$4258f968$455da0d2$18151@allthenewsgroups.com...
> YES I CONNECTED THE WOL LEAD INTO THE CBOX AND SINCE I PUT THE NEW
> CBOX I JUS GOT THE REMOTE WILL TURN THE COMPUTER ON BUT WONT DO
> ANYTHING ELSE.... :?
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

I have both my rear usb`s and front usbs connected and I have no problem.
Except that my Hamdigator will not power on my pc but all other features
work. My power supply is not outputting enough power in standby to achieve
this apparently!

Its just a gimmick anyway........... its not much use for anything and I
never use it!


"DigiSign" <ds@carnet.hr> wrote in message
news3bngd$14t$1@garrison.globalnet.hr...
> Same problem that I have for months - Still no solution!!
> Years ago I had an ASUS P2BF MoBo with 2 USB connectors on the back but
only
> one was capable to deliver power for connected devices at the same time
wich
> was, as you can guess, specified nowhere. Is it possible it's the same
> problem here (if you connect USB's on the rear bracket and those on the
> CBox, there's not enough power to drive 'em all?)
>
> Davor
>
> "ACHILLES" <KAIZARSOLZA@AOL-dot-COM.no-spam.invalid> wrote in message
> news:774bd$4258f968$455da0d2$18151@allthenewsgroups.com...
> > YES I CONNECTED THE WOL LEAD INTO THE CBOX AND SINCE I PUT THE NEW
> > CBOX I JUS GOT THE REMOTE WILL TURN THE COMPUTER ON BUT WONT DO
> > ANYTHING ELSE.... :?
> >
>
>

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

ALSO I HVE A 500W POWER SUPPLY RUNNING MY COMPUTER SO I DONT THINK
IT'S A POWER ISSUE

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

WELL I HVE A TOTAL 8 USB HUBS AND 4 FIREWIRE HUBS AND ALL WORKS
PROPERLY AS A MATTER FACT ONLY ONE OF THE USB HUBS IS BEING USED AND
ITS NOT IN THE BACK NOR THE FRONT OF MY COMPUTER OR CBOX AND ITS NOT
EVEN A USB 2.0 DEVICE THAT'S USING IT WHICH IS MY PRINTER....SO I
GUESS I SHOULD GIVE ON THIS HANDIGATOR THINGY.

Archived from groups: alt.comp.periphs.mainboard.chaintech (More info?)

Could you stop posting in capitals

Its regarded as "shouting" on Newsgroup posts!

I assume you are new to all this!

Give chaintech support an email and they may be able to help....they have
certainly helped me in the past!

"ACHILLES" <KAIZARSOLZA@AOL-dot-COM.no-spam.invalid> wrote in message
news:491d9$425a40e8$455da0d2$29304@allthenewsgroups.com...
> ALSO I HVE A 500W POWER SUPPLY RUNNING MY COMPUTER SO I DONT THINK
> IT'S A POWER ISSUE
>